JB/T 6020-1992 Rules for compiling models of electronic igniters for magneto motors

This standard specifies the rules for the compilation of product models of electronic igniters for magneto motors. This standard applies to the compilation of product models of electronic igniters for magneto motors for various purposes (except aviation). JB/T 6020-1992 Rules for the compilation of product models of electronic igniters for magneto motors JB/T6020-1992 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T6020-92
Electronic Ignitor for Magnetor
Model Compilation Rules
Published on 1992-05-28
Implementation by the Ministry of Machinery and Electronics Industry of the People's Republic of China on 1993-01-01
Mechanical Industry Standard of the People's Republic of China
Electronic Ignitor for Magnetor
Model Compilation Rules
Subject Content and Scope of Application
This standard specifies the compilation rules for the product models of electronic ignitors for magnetor. This standard applies to the compilation of product models of electronic ignitors for magnetor for various purposes (except aviation). 2 Model Compilation Rules
JB/T6020-92
2.1 The product model of electronic ignitor consists of uppercase straight Chinese phonetic letters (hereinafter referred to as characters) and straight Arabic numerals (hereinafter referred to as numbers). Its composition is as follows:
Variant code
Design serial number
Enterprise (trademark) name code
Specification code
Magneto type code
Structure code
Classification codebZxz.net
Product code
2.2.1 Product code: The letter D indicates the electronic igniter. 2.2.2
Classification code: No symbol indicates a capacitor discharge igniter; the letter G indicates an inductive igniter. Structural code: No symbol indicates that there is no ignition coil in the electronic igniter; the letter Z indicates an integral structure in which the electronic igniter and the ignition coil are sealed together.
2.2.4 Code for the type of magneto used: no symbol indicates a flywheel magneto; the letter N indicates an inner rotor magneto; the letter D indicates a single magneto.
The specification code should be consistent with the specification code of the magneto used. 2.2.5
Corporate (trademark) name code: two characters are used to represent it, but the corporate and trademark name codes are not allowed to be used together. Design serial number: It is represented by numbers in the order of product design. Variant code: The variants of a series of products are represented by letters in sequence. However, the three letters I, X, and O shall not be used. 3 Model compilation example
Inductive electronic igniter, equipped with inner rotor type magneto with specification 20, Changte brand, design serial number 2DGN 20- CT 2
Approved by the Ministry of Machinery and Electronics Industry on May 28, 1992 and implemented on January 1, 1993
JB/T602092
3.2 Capacitor discharge electronic igniter, an integral structure in which the electronic igniter and the ignition wire are sealed together, equipped with a Sichuan flywheel type magneto with specification 50, Aviation brand, design serial number 3, first variant: DZ50-HK3A
Additional instructions:
This standard was proposed and managed by Tianjin Internal Combustion Engine Research Institute. This standard was drafted by Tianjin Internal Combustion Engine Research Institute. The main drafters of this standard were Li Jixian and Ren Lihuan. 2
People's Republic of China
Mechanical Industry Standard
Electronic Ignitor for Magnetron
Model Compilation Rules
JB/T 602092
Published by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry Printed by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry (P.O. Box 8144, Beijing 100081)
Copyright reserved. No reproduction allowed
01/16 Printing Sheet 3/8 Words 4,000
Format 880×1230
First Printing in October 1992
Edition 10, 1992
Print 00,001—500
Price 1.20 Yuan
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.