SY 6044-1994 Emergency evacuation conditions for shallow-water oil workers
time:
2024-08-07 01:39:08
- SY 6044-1994
- Abolished
Standard ID:
SY 6044-1994
Standard Name:
Emergency evacuation conditions for shallow-water oil workers
Chinese Name:
浅海石油作业人员应急撤离条件
Standard category:
Oil and gas industry standards (SY)
-
Date of Release:
1995-01-18 -
Date of Implementation:
1995-07-01 -
Date of Expiration:
2004-11-01
China Standard Classification Number:
Petroleum>>Petroleum Exploration, Development and Gathering>>E15 Offshore Oil Operations
alternative situation:
Replaced by SY/T 6044-2004
Skip to download
Summary:
SY 6044-1994 Emergency Evacuation Conditions for Shallow-water Oil WorkersSY6044-1994 Standard download decompression password: www.bzxz.net
Some standard content:
Petroleum and Natural Gas Industry Standard of the People's Republic of China SY 6044-94
Emergency Evacuation Conditions for Shallow-water Oil Operation Personnel Issued on January 18, 1995
China National Petroleum Corporation
1995-07-01 Implementation
Subject Content and Scope of Application
Petroleum and Natural Gas Industry Standard of the People's Republic of China Emergency Evacuation Conditions for Shallow-water Oil Operation Personnel This standard specifies the emergency evacuation conditions for personnel in the event of an emergency during shallow-water oil operations. SY 6044-94
This standard is applicable to the oil and gas operators of China National Petroleum Corporation in the shallow-water waters of the People's Republic of China, whether operating on their own or in cooperation with foreign parties in accordance with the law.
2 Terminology
2.1 Shallow-water Oil Operation
Oil exploration, development and production operations and related activities in shallow-water waters. 2.2 Emergency Evacuation of Personnel
When an emergency event endangers the life safety of personnel on shallow-water oil operation facilities (hereinafter referred to as facilities): the process of evacuating personnel from the facilities according to the emergency procedures.
2.3 Shallow-water Oil Operation Facilities
Various buildings, ships, platforms and other devices used for shallow-water oil operations in shallow-water areas, including but not limited to the following:
a. Mobile drilling platforms, oil production platforms, operating platforms; b. Fixed drilling platforms, oil production platforms, artificial islands; c. Cementing barges, pipe-laying vessels, oil construction engineering barges, special amphibious devices for rock islands; d. Single-point mooring, floating oil storage units, crude oil tankers, etc. 3 Emergency Evacuation Conditions for Personnel
When one of the following emergencies occurs: Emergency evacuation of personnel should be carried out. 3.1 Blowoutwww.bzxz.net
Drilling: Testing, blowout occurs during underground operation, and control measures are ineffective or cause a major fire that cannot be controlled. 3.2 Fire
When a fire occurs in a facility due to various reasons (such as a major oil spill), and fire-fighting measures are ineffective, endangering the lives of personnel on the facility.
3.3 Explosion
When an explosion occurs on the facility, endangering the safety of the entire facility and the lives of personnel. 3.4 Hydrogen sulfide (H,S)
If sulfide oxygen gas appears on the facility during operation and the hydrogen sulfide concentration within 5 to 10m around the safety zone of the facility reaches 100mg/1 and emergency treatment is ineffective,
3.5 Tropical cyclone
3.5.1 If the facility is in operation and cannot effectively avoid the typhoon due to a typhoon alert: When the center of the typhoon is 1500 to 1000km away from the facility, emergency evacuation should be prepared: When the center of the typhoon is 1000 to 500km away from the facility, emergency evacuation of personnel can be carried out; when the typhoon vanguard (Beaufort Force 8) arrives 12h before the facility is scheduled to be built, emergency evacuation of personnel should be carried out. 3.5.2 The facility is in a floating state: When the facility is in a floating state such as towing or displacement: In the event of a tropical storm, after adjusting the stability of the facility or taking other rescue measures, it is still likely to capsize. 3.6 Sea ice
SY 6044 94
When it is predicted that the sea area where the facility is located will have severe ice conditions exceeding the design allowable, endangering the lives of personnel on the facility. 3.7 Tsunami
When it is predicted that a tsunami will occur in the sea area where the facility is located, endangering the lives of personnel on the facility. 3.8 Earthquake
When it is predicted that the sea area where the facility is located will have a ground attenuation intensity exceeding the design allowable. 3.9 Damage to the floating body and water ingress
When the facility is in a floating state such as towing or displacement, the floating body is seriously damaged and water ingress occurs due to various reasons (such as reefing, wind damage, collision, etc.), and it may capsize after rescue efforts are ineffective. 3.10 Loss of stability
When the facility loses stability due to various reasons, and after all measures are taken, it may capsize. 4 Emergency evacuation of personnel
4.1 The emergency evacuation order for personnel shall be issued by the first administrative person in charge of the facility or the person in charge authorized by him on site. 4.2 Before the emergency evacuation of personnel, a signal shall be issued quickly and reported to the superior competent department. Additional notes:
This standard is proposed by the Technical Supervision Bureau of China National Petroleum Corporation. This standard is under the jurisdiction of the Petroleum Industry Safety Professional Standardization Technical Committee. This standard is drafted by the Beach Drilling Company and the Beach Safety Technical Supervision Office of Shengli Petroleum Administration. The main drafters of this standard are Zhao Xijiang, Lu Shihong, and Mark.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Emergency Evacuation Conditions for Shallow-water Oil Operation Personnel Issued on January 18, 1995
China National Petroleum Corporation
1995-07-01 Implementation
Subject Content and Scope of Application
Petroleum and Natural Gas Industry Standard of the People's Republic of China Emergency Evacuation Conditions for Shallow-water Oil Operation Personnel This standard specifies the emergency evacuation conditions for personnel in the event of an emergency during shallow-water oil operations. SY 6044-94
This standard is applicable to the oil and gas operators of China National Petroleum Corporation in the shallow-water waters of the People's Republic of China, whether operating on their own or in cooperation with foreign parties in accordance with the law.
2 Terminology
2.1 Shallow-water Oil Operation
Oil exploration, development and production operations and related activities in shallow-water waters. 2.2 Emergency Evacuation of Personnel
When an emergency event endangers the life safety of personnel on shallow-water oil operation facilities (hereinafter referred to as facilities): the process of evacuating personnel from the facilities according to the emergency procedures.
2.3 Shallow-water Oil Operation Facilities
Various buildings, ships, platforms and other devices used for shallow-water oil operations in shallow-water areas, including but not limited to the following:
a. Mobile drilling platforms, oil production platforms, operating platforms; b. Fixed drilling platforms, oil production platforms, artificial islands; c. Cementing barges, pipe-laying vessels, oil construction engineering barges, special amphibious devices for rock islands; d. Single-point mooring, floating oil storage units, crude oil tankers, etc. 3 Emergency Evacuation Conditions for Personnel
When one of the following emergencies occurs: Emergency evacuation of personnel should be carried out. 3.1 Blowoutwww.bzxz.net
Drilling: Testing, blowout occurs during underground operation, and control measures are ineffective or cause a major fire that cannot be controlled. 3.2 Fire
When a fire occurs in a facility due to various reasons (such as a major oil spill), and fire-fighting measures are ineffective, endangering the lives of personnel on the facility.
3.3 Explosion
When an explosion occurs on the facility, endangering the safety of the entire facility and the lives of personnel. 3.4 Hydrogen sulfide (H,S)
If sulfide oxygen gas appears on the facility during operation and the hydrogen sulfide concentration within 5 to 10m around the safety zone of the facility reaches 100mg/1 and emergency treatment is ineffective,
3.5 Tropical cyclone
3.5.1 If the facility is in operation and cannot effectively avoid the typhoon due to a typhoon alert: When the center of the typhoon is 1500 to 1000km away from the facility, emergency evacuation should be prepared: When the center of the typhoon is 1000 to 500km away from the facility, emergency evacuation of personnel can be carried out; when the typhoon vanguard (Beaufort Force 8) arrives 12h before the facility is scheduled to be built, emergency evacuation of personnel should be carried out. 3.5.2 The facility is in a floating state: When the facility is in a floating state such as towing or displacement: In the event of a tropical storm, after adjusting the stability of the facility or taking other rescue measures, it is still likely to capsize. 3.6 Sea ice
SY 6044 94
When it is predicted that the sea area where the facility is located will have severe ice conditions exceeding the design allowable, endangering the lives of personnel on the facility. 3.7 Tsunami
When it is predicted that a tsunami will occur in the sea area where the facility is located, endangering the lives of personnel on the facility. 3.8 Earthquake
When it is predicted that the sea area where the facility is located will have a ground attenuation intensity exceeding the design allowable. 3.9 Damage to the floating body and water ingress
When the facility is in a floating state such as towing or displacement, the floating body is seriously damaged and water ingress occurs due to various reasons (such as reefing, wind damage, collision, etc.), and it may capsize after rescue efforts are ineffective. 3.10 Loss of stability
When the facility loses stability due to various reasons, and after all measures are taken, it may capsize. 4 Emergency evacuation of personnel
4.1 The emergency evacuation order for personnel shall be issued by the first administrative person in charge of the facility or the person in charge authorized by him on site. 4.2 Before the emergency evacuation of personnel, a signal shall be issued quickly and reported to the superior competent department. Additional notes:
This standard is proposed by the Technical Supervision Bureau of China National Petroleum Corporation. This standard is under the jurisdiction of the Petroleum Industry Safety Professional Standardization Technical Committee. This standard is drafted by the Beach Drilling Company and the Beach Safety Technical Supervision Office of Shengli Petroleum Administration. The main drafters of this standard are Zhao Xijiang, Lu Shihong, and Mark.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- DZ/T 0197-1997 Digital geological map layer and attribute file format
- GB/T 16561-1996 Container Equipment Delivery Note
- JB/T 50161-1999 Energy consumption classification of generator gas station
- JB/T 5893.5-1991 Test methods for physical properties of raw materials for electrical porcelain
- GB 917.1-1989 The naming numbering and coding rules of highway route_naming and numbering rules
- HG 3283-2002 Chlormequat aqueous solution
- HG/T 3591-1999 Potassium pyrophosphate for electroplating
- GB 5177.4-1985 Determination of the bromine index of industrial alkylbenzenes - Potentiometric titration method
- SJ/T 10587.1-1994 Technical data of Type DW-305 electronic glass
- GB/T 4267-2004 Dimensions of shank diameter and driving square head of straight shank rotary tools
- JB/T 9023.1-1999 KQ open-pit down-the-hole drill
- JB/T 3550.2-1999 Cylinder boring machine accuracy inspection
- GB 4165-1984 Guidelines for the use of variable capacitors for electronic equipment
- JB/T 10257-2001 Resistance welding equipment—Insulating pins for electrode stops
- GB/T 2951.34-1994 Test methods for mechanical and physical properties of wires and cables - Tear test
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com