GB/T 2885.6-1981 Basic parameters and dimensions of metal ore material vehicles
time:
2024-08-11 13:31:29
- GB/T 2885.6-1981
- Abolished
Standard ID:
GB/T 2885.6-1981
Standard Name:
Basic parameters and dimensions of metal ore material vehicles
Chinese Name:
金属矿材料车 基本参数及尺寸
Standard category:
National Standard (GB)
-
Date of Release:
1981-01-02 -
Date of Implementation:
1982-07-01 -
Date of Expiration:
2009-02-01
Standard ICS number:
Mining and Mineral Products >> 73.100 Mining EquipmentChina Standard Classification Number:
Railway>>Railway Vehicles>>S56 Narrow Gauge Industrial and Mining Railway Vehicles
alternative situation:
Replaced by GB/T 2885.6-2008
Release date:
1981-12-31Review date:
2004-10-14Drafting Organization:
Beijing Nonferrous Metallurgy Design and Research InstituteFocal point Organization:
National Technical Committee for Standardization of Mining MachineryPublishing Department:
China Machinery Industry FederationCompetent Authority:
China Machinery Industry Federation
Skip to download
Summary:
GB/T 2885.6-1981 Basic parameters and dimensions of metal ore material vehicles GB/T2885.6-1981 standard download decompression password: www.bzxz.net
Some standard content:
The basic parameters and dimensions of metal ore material vehicles of the People's Republic of China
National Standard
Basic parameters and dimensions of metal ore material vehicles
GB2885.6—
This standard applies to underground metal mines or other mines, and transports support materials and other materials along underground tunnels and surface industrial sites.
The basic parameters and dimensions of metal ore material vehicles shall comply with the provisions of the table. Note: This figure only shows the dimension symbols.
State Administration of Nonferrous Metals Industry
Implemented on July 1, 1982
Drafted by Beijing Nonferrous Metallurgical Design and Research Institute
YLC1-6
YLC1-7
YLC3-6
YLC3-7
YLC3-9
GB2885.681
Overall dimensions
Note: ①Height H and traction height h are measured from the rail surface (when empty). ②The maximum load is the load allowed by the strength of the mine car. Width
Traction height
iiKAoNiKAca
Total 3 pages Page 2
Traction force
(not too
Total 3 pages Page 3
2. The model of the metal ore material car is stipulated as follows: GB2885.6
Marking example:
Load capacity 1t, track gauge 762mm Metal ore material car: YLC1-7 material car GB2885.6-—81
Track gauge code: 6 means 600mm
7 means 762mm
9 means 900mm
Load code (.t)
Mine car code
Material car code
Metal ore code
-YYKAONKA ca
People's Republic of China
National Standard
Basic parameters and dimensions of metal mine cars
GB2885.1~2885.6—81
Published by Technical Standards Press
(Beijing Fuwai Sanlihe)
Printed by the printing workshop of Technical Standards Press
Sold by Xinhua Bookstores in various places
Published by Xinhua Bookstore Beijing Distribution Office
2 Number of words 29.000www.bzxz.net
Format 880×12301/16 Printing sheet 1%
First edition in June 1982 First printing in June 1982 Printing run 1--4,000
Book number: 15169·1-1249
New Science and Technology Books
31—149
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard
Basic parameters and dimensions of metal ore material vehicles
GB2885.6—
This standard applies to underground metal mines or other mines, and transports support materials and other materials along underground tunnels and surface industrial sites.
The basic parameters and dimensions of metal ore material vehicles shall comply with the provisions of the table. Note: This figure only shows the dimension symbols.
State Administration of Nonferrous Metals Industry
Implemented on July 1, 1982
Drafted by Beijing Nonferrous Metallurgical Design and Research Institute
YLC1-6
YLC1-7
YLC3-6
YLC3-7
YLC3-9
GB2885.681
Overall dimensions
Note: ①Height H and traction height h are measured from the rail surface (when empty). ②The maximum load is the load allowed by the strength of the mine car. Width
Traction height
iiKAoNiKAca
Total 3 pages Page 2
Traction force
(not too
Total 3 pages Page 3
2. The model of the metal ore material car is stipulated as follows: GB2885.6
Marking example:
Load capacity 1t, track gauge 762mm Metal ore material car: YLC1-7 material car GB2885.6-—81
Track gauge code: 6 means 600mm
7 means 762mm
9 means 900mm
Load code (.t)
Mine car code
Material car code
Metal ore code
-YYKAONKA ca
People's Republic of China
National Standard
Basic parameters and dimensions of metal mine cars
GB2885.1~2885.6—81
Published by Technical Standards Press
(Beijing Fuwai Sanlihe)
Printed by the printing workshop of Technical Standards Press
Sold by Xinhua Bookstores in various places
Published by Xinhua Bookstore Beijing Distribution Office
2 Number of words 29.000www.bzxz.net
Format 880×12301/16 Printing sheet 1%
First edition in June 1982 First printing in June 1982 Printing run 1--4,000
Book number: 15169·1-1249
New Science and Technology Books
31—149
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 8031.4-1999 Side-mounted tool setting blocks for machine tool fixture parts and components
- JB/T 9015-1999 Backstop for belt conveyor
- GB/T 9792-2003 Conversion coatings on metallic materials—Determination of coating mass per unit area—Gravimetric methods
- GB/T 3634-1995 Industrial hydrogen
- GB/T 14745-1993 Packaging-Cushioning materials-Test method for creep properties
- JB/T 6728-1993 Technical requirements for camshafts for internal combustion engines
- GB/T 2924-1995 Determination of ISO sensitivity of negative films for color photography
- JB/T 9093-1999 Technical requirements for steam traps
- JB/T 6119-1992 TCL sedimentation filter centrifuge operating procedures
- SJ 2534.1-1984 Test procedures for antennas-Antenna-range instrumentation
- GB/T 14449-2008 Test method for aerosol products
- SJ 20779-2000 Test methods for thermosetting insulating plastic laminates
- JB/T 9593.1-2002 Technical requirements for flameproof three-phase asynchronous motors for use in coal mines Part 1: YBK2 series flameproof three-phase asynchronous motors for use in underground coal mines (frame sizes 100 to 315)
- GB/T 4470-1998 Terminology for flame emission, atomic absorption and atomic fluorescence spectrometry
- QB 1334-2004 General technical requirements for faucets
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com