JB/T 3411.112-1999 Adjustment washer dimensions

JB/T 3411.112-1999 JB/T 3411.112-1999 Adjustment of washer dimensions JB/T3411.112-1999 Standard download decompression password: www.bzxz.net

IC5 25.00.01
Mechanical Industry Standard of the People's Republic of China
IB/T 3411.101-3411.127—1999 Accessories for Milling Machines
Accessories afmilling maclhincs1999-05-2U Issued by
National Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Adjustment washer circle size
Adjostmentwasherllimensinns
This standard specifies the style and size of quick drawings
2 Referenced standards
JB/E3411.112-1999
357383
The following standards contain series of texts, and the referenced structures in this standard are all provisions of this standard: Publication of this standard: All the parts shown are valid: All marked parts have been revised. The parties using this standard may use the latest version of the following standard: G/T35301983 Heat treatment spring disc
Style and size
Formal and size are specified in the following drawings and tables.
Note: For the original teaching garden, there can be a diameter of m, detailed in the National Machinery Industry Bureau 1999-05-20 North Standard 24
2000-center 1-(1 implementation
not this size
calibration limit letter
some original size
limit eccentricity hl1
limit brown. Difference hl
good book only size
exceeding limit example difference C1
JB/T3411J12-J999
+0 12UWww.bzxZ.net
+0 170
10 080
0 03: (0.04h: 0.05; 6.1; 0.2: 63; 0.6:)2; 36
" The dimensions in brackets may not be correct,
2 When the original is 2mm, the total limit deviation is 10.1mz
3 When the thickness Hs is 1mm, it can be made of 65M, -GQG, B/T3530. 4 Marking
Marking example:
d=22ml, H=20mm
Letter 22×20JB/73411.112—1999
(12)(13) (16)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.