GB 5085.1-1996 Hazardous Waste Identification Standard Corrosive Identification

GB 5085.1-1996 Hazardous Waste Identification Standard Corrosive Identification GB5085.1-1996 Standard download and decompression password: www.bzxz.net

National Standard of the People's Republic of China
Identification Standard for Hazardous Wastes
Corrosive Identification
Identification standard for hazardous wastesIdentification for carrosirityForeword
GB5085.1--1996||tt| |Replace the relevant parts of GB508585
In order to implement the "Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Waste", strengthen the management of hazardous wastes, protect the environment: and protect human health, this standard is specially formulated .
This standard is the first part of the hazardous waste identification standards.
This standard will be implemented from August 1, 1996, and will replace the corrosive identification requirements in Article 2, Section 2.2 of GB5085--85. From the date of implementation of this standard, GB5085-85 "Non-ferrous Metal Industry" Solid Waste Pollution Control Standards" are invalidated. This standard has changed in the following content:
Since the name of this standard is the hazardous waste identification standard, the scope of application is extended to hazardous waste generated by any process, and is no longer limited to solid waste generated by the non-ferrous metal industry. . This standard is proposed by the Science and Technology Standards Department of the State Environmental Protection Administration. The State Environmental Protection Administration is responsible for interpreting this standard. 1 Subject content and scope of application
1.1 Subject content
This standard specifies the corrosivity standard value for identifying one of the hazardous characteristics of hazardous wastes. 1.2 Scope of applicationwwW.bzxz.Net
This standard is applicable to the corrosive identification of solid hazardous wastes generated in any production process and life. 2 Terms
2.1 Hazardous waste
objects.
Refers to waste 3 reference standards that have one or more hazardous properties such as corrosiveness, acute toxicity, diffuse toxicity, reactivity, infectiousness, radioactivity, etc.
GB/T15555.12-- 95
4 Corrosiveness Identification Value
Solid Waste Corrosivity Determination Glass Electrode Method When the pH value is greater than or equal to 12.5, or less than or equal to 2.0, the waste is corrosive hazardous waste. National Environmental Protection Administration approved on 1996-07-26 for implementation on 1996-08-01
Measurement method
GB5085.1-1996
The determination was carried out in accordance with GB/T15555.12--95 solid waste corrosivity determination glass electrode method. Implementation of Standards
The environmental protection administrative departments of local people's governments at or above the county level are responsible for the supervision and implementation of this standard.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.