GB/T 14568-1993 Types and parameters of slotted metal bursting discs
time:
2024-08-08 10:18:17
- GB/T 14568-1993
- in force
Standard ID:
GB/T 14568-1993
Standard Name:
Types and parameters of slotted metal bursting discs
Chinese Name:
开缝形金属爆破片型式与参数
Standard category:
National Standard (GB)
-
Date of Release:
1993-08-19 -
Date of Implementation:
1994-02-01
Standard ICS number:
Fluid systems and general parts>>Fluid storage devices>>23.020.30 Pressure vessels, gas cylindersChina Standard Classification Number:
Machinery>>General Machinery and Equipment>>J74 Pressure Vessel
Release date:
1993-08-19Review date:
2004-10-14Drafting Organization:
Aviation Industry Corporation Chengdu Aeronautical Instrument CompanyFocal point Organization:
National Technical Committee for Standardization of Boilers and Pressure VesselsPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the type, nominal diameter, bursting pressure range, etc. of the positive arch slotted metal bursting disc. This standard is applicable to the overpressure relief of pressure vessels, pipelines or other confined spaces. The maximum working pressure of the system shall not exceed 80% of the bursting pressure. This type of bursting disc will produce a small amount of fragments after the explosion. Among them, the positive arch slotted with bracket type, the positive arch slotted with reinforcement ring and the bracket type can withstand a certain back pressure difference. GB/T 14568-1993 Types and parameters of slotted metal bursting discs GB/T14568-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 8351-1996 Technical requirements for chain-type stepping shot blasting machines
- JB/T 6213.4-1992 Flexible cables and cords for connecting motor windings Part 4 Flexible cables and cords with a maximum continuous operating conductor temperature of 180°C
- JB/T 6535-1992 Technical conditions of centrifugal sewage pump
- HG/T 2743.6-1996 Specification for the preparation of product standards for compound soluble concentrates of pesticides
- JGJ/T 97-1995 Engineering seismic terminology standard JGJ/T97-95
- GB/T 15080.9-1994 Chemical analysis methods for antimony concentrates - Determination of gold content
- GB/T 21632-2008 Dangerous goods - Test method of foam flammability for aerosols
- GB/T 9321-1988 Fixed capacitors for electronic equipment Part 8 (1): Blank detail specification Class 1 high voltage ceramic capacitors Assessment level E (for certification purposes)
- JB/T 4318.4-1996 Technical requirements for horizontal band sawing machines
- GB/T 11363-1989 Brazing joint strength test method
- JB/T 9568-2000 General technical requirements for relays, protection and automatic devices in power systems
- GB/T 8543-1987 Determination of mechanical vibration of gear units during acceptance tests
- GB/T 5121.8-1996 Chemical analysis methods for copper and copper alloys - Determination of carbon and sulfur content
- SJ/T 10572-1994 Detail specification for electronic components-Fixed precision,Type RJ74 metal film precision resistors Assessment level E
- GB/T 2941-1991 Standard temperature, humidity and time for environmental conditioning and testing of rubber specimens
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]