JB/T 9263.1-1999 Types and specifications of internal standard industrial glass thermometers

JB/T 9263.1-1999 Internal Standard Industrial Glass Thermometer Type and JB/T9263.1-1999 Standard Download Decompression Password: www.bzxz.net

ICS 17.200.20
Machinery Industry Standard of the People's Republic of China
B/T9263.1—1999
Inner-scale industrial glass thermometers
Types and basic dimensions
The types and fundamental stzes otenclosed-scale mdustrial thermormeters1999-08-06Promulgated
National Bureau of Machinery Industry
Implementation on 2000-01-01
JB T926S.11999
This special standard is a certification of 2B271—84 inner-scale industrial glass thermometer types and basic dimensions>. This standard number ZBY271-8 is different in the three major technical contents, and only the original standard has been revised. From the implementation of this standard, it replaces ZRY27I-24. The standard is proposed and managed by the Regional Industrial Process Quality and Control Standardization Technical Committee. The three major drafting units of this standard are: Beijing Glass Research Institute. The main drafters of this standard are: Xie Zhizhu, Shang Zhangda. The types and basic sizes of internal-scale industrial glass thermometers are specified in this standard. The specifications and dimensions are as follows: JB/TSS.113SS ± 2B 2-]: 3-]: 5-]: 1. The internal-scale industrial glass thermometers shall comply with the provisions of B/T062[9T. The standard does not include metal protective tubes for internal-scale industrial glass thermometers. This standard is used for internal-scale industrial glass thermometers (hereinafter referred to as internal-scale industrial glass thermometers). 2 Type
The temperature setting method is the local setting method of the lower body. 3 Lower body shape
The body shape of the display is:
straight, Figure 1
b19 triangle 2;
c! 135 Angle 3.
General dimensions shall conform to the requirements of Table 1 and Figure 3.1
Shanghai Institute of Technology
135 ±71
40 - 10
National Machinery Industry Bureau 1989-08-C6 approved directly
160 products
200-10
230-15
300 -
5so-18
2c -1-ot implementation
+0 ± 10
JB/T 9263. 1-1399
639 --5
1250-3
1301 -
Method: The upper limit of the torsion F is greater than 300 or the lower limit is -50, and the lower limit error is not less than [0Car, and the maximum is not greater than 00d
4 Measurement range, grid value and indication error limit JB/T9269.1-1999
The measurement range, grid value and indication error limit of the temperature gauge shall comply with the provisions of Table 2. 2
Grid use
Example measurement
80 - + 30
50 - + 30
33 + 70
0 - 50Www.bzxZ.net
0 ~ 100
0 -200
0~ 400
0~ 500
Water meter
With standard resistance pressure gauge
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.