GB/T 3403-1982 Nomenclature of amino molding compounds

This standard applies to the classification, naming and unified model compilation of amino molding plastics in powder, granular or fibrous form. This standard does not provide specific uses and properties of the materials. GB/T 3403-1982 Amino molding plastic naming GB/T3403-1982 standard download decompression password: www.bzxz.net

1 Scope of application
National Standard of the People's Republic of China
Nomenclature of
aminoplastic molding compoundsUDC 67B.852
.2 : 001. 4
GB 8403--B2
1.1 This standard applies to the classification, naming and unified model compilation of nitrogen-based molding compounds in powder, granular or fibrous form. 1.2 This standard does not provide specific uses and properties of the materials. 2 Classification
Amino molding compounds are divided into two categories according to the resin composition. The resin abbreviation code is in accordance with GB1844-80 "Abbreviation Code for Plastics and Resins": urea formaldehyde resin as the main component - UF
Melamine-H-formaldehyde resin as the main component
3 Model
Amino molding compounds are divided according to filler type, apparent properties, main use and color number. According to the type of filler, it is divided into:
α-cellulose filler—1
Glass fiber filler— 2
Synthetic fiber filler—— 3
Mineral and other fiber fillers—
Other types of fillers—
According to the apparent properties, it is divided into:
Powdered pressed plastic—
Powdered translucent pressed plastic
Granular pressed plastic—G
Granular injection molding plastic—I
Fiber-like pressed plastic—
According to the main use, it is divided into:
General use
For tableware, with hot water resistance
For electrical appliances, with excellent electrical properties
(including arc resistance)—C
For high impact resistance—D
Other special uses—E
3.4 ​​Color The color number consists of three digits, and the hundredth digit represents the color system. White
Yellow (beige)
100~199
200~299
300399
Published by the National Bureau of Standards on December 29, 1982
Implemented on October 1, 1983
Gray (black)
400~499
500~599
600~699
700-799
3.5 The model of amino molding plastic consists of the following parts: 4 Naming
The nomenclature of amino molding plastic is:| |tt||Resin abbreviation code
4.2 Naming examples
1.2.1 An amino molding plastic of a certain urea formaldehyde resin uses α-cellulose as filler
Powdered pressed plastic
For general use
A certain red color
is named:
UF1P-A531
4.2.2 A hydrogen-based molding plastic of a certain urea formaldehyde resin uses α-cellulose as filler
Granular injection molding material
For general use
A certain blue color
is named:
UF11 -A408
GB8403-82
Filling type
Appearance
Main purpose
Color guide
4.2.3 A certain amino molding plastic of melamine-formaldehyde resin uses α-cellulose as filler
It is a powdered pressed plastic
for tableware
a certain yellow color
is named:
—B205
4,2.4 A certain amino molding plastic of melamine-formaldehyde resin (LF)
GB 01-B2
GB 3403—82
Appendix A
Procedure for compiling the naming of amino molding plastics
(Supplement)bzxZ.net
A.1 All products officially produced by various units shall be uniformly named according to the provisions of the standard from the date of implementation of GB3403—82 "Naming of Amino Molding Plastics" and reported to ××× for review, and the following materials shall be attached: A, 1.1 Technical indicators;
A.1.2 Production process information.
A, 2 For new products that have passed the appraisal at all levels and are officially put into production, or products that have passed the test and acceptance at all levels with foreign imported technology, the production unit shall prepare documents and apply to ××× for a model, and the following documents shall be attached: A.2.1 Research and trial production report or test summary report A.2.2 Appraisal report and conclusion or acceptance certificate A.2.8 Technical indicators and inspection methods;
A.2.4 Production process information.
Additional Notes:
This standard was proposed by the Ministry of Chemical Industry of the People's Republic of China and is under the jurisdiction of the Plastics Resin Products Standardization Branch of the National Plastics Standardization Technical Committee.
This standard was drafted by Shanghai Tianshan Plastic Factory. The main drafters of this standard are Liu Renxiao, Liu Dongzhi and Chen Wenji.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.