标准信息
STANDARD INFORMATION- 标准编号
- clause-G5
- 所属分类
- 其他国外标准与工程资料
- 文件语言
- 英语
- 文件格式
- 文件页数
- 6 页
- 文件大小
- 146.03 KB
· 更新：
标准简介
OVERVIEW中文简介
标准 clause-G5 的预览内容
English summary
Preview of standard clause-G5
以上为根据文件整理的内容简介。
标准内容预览
DOCUMENT PREVIEWReferences
Amend 1 Jul 2001
For the purposes of New Zealand Building Code compliance, acceptable reference documents include only the quoted edition and specific amendments as listed below.
|
Standards Association of New Zealand Amend 1 Jul 2001 NZS 4121: 2001 Design for access and mobility – Buildings and associated facilities NZS 4214: 1977 Methods of determining the total thermal resistance of parts of buildings |
Where quoted AS1 3.0.1 Definitions |
6
Status of Compliance Documents
Compliance Documents are prepared by the Department of Building and Housing in accordance with section 22 of the Building Act 2004. A Compliance Document is for use in establishing compliance with the New Zealand Building Code.
A person who complies with a Compliance Document will be treated as having complied with the provisions of the Building Code to which the Compliance Document relates. However, a Compliance Document is only one method of complying with the Building Code. There may be alternative ways to comply.
Users should make themselves familiar with the preface to the New Zealand Building Code Handbook, which describes the status of Compliance Documents and explains alternative methods of achieving compliance.
Defined words (italicised in the text) and classified uses are explained in Clauses A1 of the Building Code and in the Definitions at the start of this Compliance Document.
| Date | Alterations | |
|---|---|---|
| First published | July 1992 | |
| Amendment 1 | 1 July 2001 | p. 2, Document History, Status p. 3, NZBC p. 7, References p. 9, Definitions |
| Note: Page numbers relate to the document at the time of Amendment and may not match page numbers in current document. | ||
Document Status
The most recent version of this document, as detailed in the Document History, is approved by the Chief Executive of the Department of Building and Housing. It is effective from 1 July 2001 and supersedes all previous versions of this document.
People using this Compliance Document should check for amendments on a regular basis. The Department of Building and Housing may amend any part of any Compliance Document at any time. Up-to-date versions of Compliance Documents are available from www.dbh.govt.nz
2
New Zealand Building Code Clause G5 Interior Environment
The mandatory provisions for building work are contained in the New Zealand Building Code (NZBC), which comprises the First Schedule to the Building Regulations 1992. The relevant NZBC Clause for Interior Environment is G5. Note that section 25 of the Disabled Persons Community Welfare Act 1975 has been replaced by section 47A of the Building Act 1991.
Amend 1 Jul 2001
FIRST SCHEDULE-continued
Clause G5-INTERIOR ENVIRONMENT
|
Provisions OBJECTIVE G5.1 The objective of this provision is to: (a) Safeguard people from illness caused by low air temperature, (b) Safeguard people from injury or loss of amenity caused by inadequate activity space, (c) Safeguard people from injury caused by unsafe installations, and (d) Ensure that people with disabilities are able to carry out normal activities and processes within buildings. FUNCTIONAL REQUIREMENT G5.2.1 Buildings shall be constructed to provide: (a) An adequate, controlled interior temperature, (b) Adequate activity space for the intended use, and (c) Accessible spaces and facilities. G5.2.2 Heating appliances in buildings shall be installed in a way that reduces the likelihood of injury. PERFORMANCE G5.3.1 Habitable spaces, bathrooms and recreation rooms shall have the provision for maintaining the internal temperature at no less that 16°C measured at 750 mm above floor level, while the space is adequately ventilated. |
Limits on application Objective G5.1 (d) shall apply to those buildings to which section 25 of the Disabled Persons Community Welfare Act 1975 applies. Requirement G5.2.1 (a) shall apply only to habitable spaces, bathrooms and recreation rooms in old people's homes and early childhood centres. Requirement G5.2.1 (b) shall apply only to old people's homes. Requirement G5.2.1 (c) shall apply only to Communal Residential, Communal Non-residential, and Commercial buildings. Performance G5.3.1 shall apply only to old people's homes and early childhood centres. |
3
FIRST SCHEDULE–continued
|
Provisions G5.3.2 Heating appliances, and any attached cables, pipes or other fittings shall be securely fixed in place. G5.3.3 Habitable spaces shall have sufficient space for activity, furniture, and sanitary and mobility aids. G5.3.4 Where reception counters or desks are provided for public use, at least one counter or desk shall be accessible. G5.3.5 Buildings shall be provided with listening systems which enable enhanced hearing by people with hearing aids. G5.3.6 Enhanced listening systems shall be identified by signs complying the Clause F8 "Signs". |
Limits on application Performance G5.3.2 shall apply only to old people's homes and early childhood centres. Performance G5.3.3 shall apply only to old people's homes. Performance G5.3.4 applies only to Communal Residential, Communal Non-Residential, and Commercial buildings. Performance G5.3.5 applies only to: (a) Communal Non-residential assembly spaces occupied by more than 250 people, and (b) Any theatre, cinema, or public hall, and (c) Assembly spaces in old people's homes occupied by more than 20 people. |
4
Contents
| Page | |
|---|---|
| References | 7 |
| Definitions | 9 |
| Verification Method G5/VM1 | 11 |
| Acceptable Solution G5/AS1 | 13 |
| 1.0 Temperature Control | 13 |
| 2.0 Space | 14 |
| 3.0 People with Disabilities | 14 |
| Index | 15 |
5
References
Amend 1 Jul 2001
For the purposes of New Zealand Building Code compliance, acceptable reference documents include only the quoted edition and specific amendments as listed below.
|
Standards Association of New Zealand Amend 1 Jul 2001 NZS 4121: 2001 Design for access and mobility – Buildings and associated facilities NZS 4214: 1977 Methods of determining the total thermal resistance of parts of buildings |
Where quoted AS1 3.0.1 Definitions |
6
预览内容由文件识别整理，表格、公式及文字请以原始文件为准。
原文图片预览
PAGE IMAGES
下载标准文件
clause-G5
英语 · PDF · 6 页 · 146.03 KB