标准信息
STANDARD INFORMATION- 标准编号
- clause-G1-2
- 所属分类
- 其他国外标准与工程资料
- 文件语言
- 英语
- 文件格式
- 文件页数
- 6 页
- 文件大小
- 492.75 KB
· 更新：
标准简介
OVERVIEW中文简介
标准 clause-G1-2 的预览内容
English summary
Preview of standard clause-G1-2
以上为根据文件整理的内容简介。
标准内容预览
DOCUMENT PREVIEWReferences
For the purposes of New Zealand Building Code compliance, acceptable reference documents include only the quoted edition and specific amendments as listed below.
Amend 4 Jul 2001
| Where quoted | ||
|---|---|---|
| Standards New Zealand | ||
| NZS 3331: 1972 | Specification for quality of vitreous china sanitary appliances | AS1 2.6.1 |
| NZS 4121: 2001 | Design for access and mobility – Buildings and associated facilities | AS1 4.2.7 |
| Standards Australia | ||
| AS 1449: 1994 | Wrought alloy steels – Stainless and heat-resisting steel plate, sheet and strip Amend: 1 |
AS1 2.3.4, 2.6.1 |
| AS 3588: 1989 | Shower bases and shower modules | AS1 2.6.1 |
| Standards Australia/New Zealand | ||
| AS/NZS 1730: 1996 | Washbasins | AS1 2.6.1 |
| AS/NZS 2023: 1995 | Baths for ablutionary purposes | AS1 2.6.1 |
6
Status of Compliance Documents
Compliance Documents are prepared by the Department of Building and Housing in accordance with section 22 of the Building Act 2004. A Compliance Document is for use in establishing compliance with the New Zealand Building Code.
A person who complies with a Compliance Document will be treated as having complied with the provisions of the Building Code to which the Compliance Document relates. However, a Compliance Document is only one method of complying with the Building Code. There may be alternative ways to comply.
Users should make themselves familiar with the preface to the New Zealand Building Code Handbook, which describes the status of Compliance Documents and explains alternative methods of achieving compliance.
Defined words (italicised in the text) and classified uses are explained in Clauses A1 of the Building Code and in the Definitions at the start of this Compliance Document.
| G1: Document History | |||
|---|---|---|---|
| Date | Alterations | ||
| First published | July 1992 | ||
| Amendment 1 | September 1993 | pp. 5 and 6, Table 1 | pp. 15 and 16, Index |
| Amendment 2 | 19 August 1994 | pp. i and ii, Document History p. v, Contents p. 3, 1.1, 1.1.1, 1.2, 1.2.1 p. 12, 4.0, 4.2.1, 4.2.2 | p. 13, 4.4, 4.4.1, 4.4.2, 4.4.3, Figure 10, Table 4 p.14, Figure 11 pp. 15 and 16, Index |
| Reprinted incorporating Amendments 1 and 2 | October 1994 | ||
| Amendment 3 | 1 December 1995 | p. vi, References | |
| Second edition | 1 December 2000 | Document revised – second edition issued | |
| Amendment 4 | 1 July 2001 | p. 2, Document History, Status p. 7, References p. 9, Definitions p. 18, Figures 5 and 6 | p. 19, Figures 7 and 8 p. 20, 4.2.7 and Figure 9 p. 21, 6.3.1 and Figure 10 |
| Note: Page numbers relate to the document at the time of Amendment and may not match page numbers in current document. | |||
Document Status
The most recent version of this document, as detailed in the Document History, is approved by the Chief Executive of the Department of Building and Housing. It is effective from 1 July 2001 and supersedes all previous versions of this document.
People using this Compliance Document should check for amendments on a regular basis. The Department of Building and Housing may amend any part of any Compliance Document at any time. Up-to-date versions of Compliance Documents are available from www.dbh.govt.nz
2
New Zealand Building Code Clause G1 Personal Hygiene
The mandatory provisions for building work are contained in the New Zealand Building Code (NZBC), which comprises the First Schedule to the Building Regulations 1992. The relevant NZBC Clause for Personal Hygiene is G1. Note that section 25 of the Disabled Persons Community Welfare Act 1975 has been replaced by section 47A of the Building Act 1991.
| 1992/150 | Building Regulations 1992 | 53 |
| FIRST SCHEDULE—continued | ||
| Clause G1—PERSONAL HYGIENE | ||
| Provisions | Limits on application | |
|---|---|---|
|
OBJECTIVE G1.1 The objective of this provision is to: (a) Safeguard people from illness caused by infection or contamination, (b) Safeguard people from loss of amenity arising from the absence of appropriate personal hygiene facilities, and (c) Ensure people with disabilities are able to carry out normal activities and processes within buildings. FUNCTIONAL REQUIREMENT G1.2 Buildings shall be provided with appropriate spaces and facilities for personal hygiene. PERFORMANCE G1.3.1 Sanitary fixtures shall be provided in sufficient number and be appropriate for the people who are intended to use them. G1.3.2 Sanitary fixtures shall be located, constructed and installed to: (a) Facilitate sanitation, (b) Avoid risk of food contamination, (c) Avoid harbouring dirt or germs, (d) Provide appropriate privacy, (e) Avoid affecting occupants of adjacent spaces from the presence of unpleasant odours, accumulation of offensive matter, or other source of annoyance, (f) Allow effective cleaning, |
Objective G1.1 (c) shall apply only to those buildings to which section 25 of the Disabled Persons Community Welfare Act 1975 applies. |
|
3
| 54 | Building Regulations 1992 | 1992/150 |
FIRST SCHEDULE—continued
| Provisions | Limits on application |
|---|---|
| (g) Discharge to a plumbing and drainage system as required by Clause G13 “Foul Water” when water-borne disposal is used, and | |
| (h) Provide a healthy safe disposal system when non-water-borne disposal is used. | |
| G1.3.3 Facilities for personal hygiene shall be provided in convenient locations. | |
| G1.3.4 Personal hygiene facilities provided for people with disabilities shall be accessible. | Performance G1.3.4 shall not apply to Housing, Outbuildings, Ancillary buildings, and to Industrial buildings where no more than 10 people are employed. |
4
Contents
| Page | |
|---|---|
| References | 7 |
| Definitions | 9 |
| Verification Method G1/VM1 | 11 |
| Acceptable Solution G1/AS1 | 13 |
| 1.0 Number and Type of Sanitary Fixtures | 13 |
| 1.1 General | 13 |
| 1.2 Sanitary towel disposal | 14 |
| 2.0 Fixture Construction and Installation | 14 |
| 2.1 WC pans | 14 |
| 2.2 Flushing systems | 15 |
| 2.3 Urinals | 15 |
| 2.4 Bidets | 16 |
| 2.5 Showers | 16 |
| 2.6 Acceptable standards | 16 |
| 3.0 Location of Sanitary Fixtures | 16 |
| 3.1 Space dimensions | 16 |
| 3.2 Access to food and work areas | 17 |
| 3.3 Basins | 17 |
| 3.4 Communal sanitary fixtures | 17 |
| 4.0 People with Disabilities | 17 |
| 4.1 Access | 17 |
| 4.2 Number of facilities | 17 |
| 5.0 Non-flushing Sanitary Fixtures | 19 |
| 6.0 Privacy | 20 |
| 6.1 Line of sight | 20 |
| 6.2 Cubicles | 21 |
| 6.3 Lobbies | 21 |
| Index | 31 |
5
References
For the purposes of New Zealand Building Code compliance, acceptable reference documents include only the quoted edition and specific amendments as listed below.
Amend 4 Jul 2001
| Where quoted | ||
|---|---|---|
| Standards New Zealand | ||
| NZS 3331: 1972 | Specification for quality of vitreous china sanitary appliances | AS1 2.6.1 |
| NZS 4121: 2001 | Design for access and mobility – Buildings and associated facilities | AS1 4.2.7 |
| Standards Australia | ||
| AS 1449: 1994 | Wrought alloy steels – Stainless and heat-resisting steel plate, sheet and strip Amend: 1 |
AS1 2.3.4, 2.6.1 |
| AS 3588: 1989 | Shower bases and shower modules | AS1 2.6.1 |
| Standards Australia/New Zealand | ||
| AS/NZS 1730: 1996 | Washbasins | AS1 2.6.1 |
| AS/NZS 2023: 1995 | Baths for ablutionary purposes | AS1 2.6.1 |
6
预览内容由文件识别整理，表格、公式及文字请以原始文件为准。
原文图片预览
PAGE IMAGES
下载标准文件
clause-G1-2
英语 · PDF · 6 页 · 492.75 KB