Clause-G14-Industrial-Liquid-Waste
新西兰建筑规范条款G14 工业液体废物
Clause-G14-Industrial-Liquid-Waste
Industrial Liquid Waste
标准信息
STANDARD INFORMATION- 标准编号
- Clause-G14-Industrial-Liquid-Waste
- 所属分类
- 其他国外标准与工程资料
- 发布机构
- Department of Building and Housing
- 版本年份
- 2007
- 文件语言
- 英语
- 文件格式
- 文件页数
- 6 页
- 文件大小
- 516.81 KB
中文名称为参考译名,文件语言以原文为准。
· 更新:
标准简介
OVERVIEW中文简介
该合规文件规定了新西兰建筑规范中工业液体废物和污水的安全卫生收集、储存、处理和处置要求。适用于产生工业液体废物或污水的建筑物,以防止感染、污染和人身伤害。
English summary
This compliance document sets requirements for the safe and hygienic collection, storage, treatment and disposal of industrial liquid waste and foul water in buildings. It applies to buildings where industrial liquid waste or foul water is generated, aiming to prevent injury, illness and contamination.
以上为根据文件整理的内容简介。
相关标签
标准内容预览
DOCUMENT PREVIEW6
Status of Compliance Documents
Compliance Documents are prepared by the Department of Building and Housing in accordance with section 22 of the Building Act 2004. A Compliance Document is for use in establishing compliance with the New Zealand Building Code.
A person who complies with a Compliance Document will be treated as having complied with the provisions of the Building Code to which the Compliance Document relates. However, a Compliance Document is only one method of complying with the Building Code. There may be alternative ways to comply.
Users should make themselves familiar with the preface to the New Zealand Building Code Handbook, which describes the status of Compliance Documents and explains alternative methods of achieving compliance.
Defined words (italicised in the text) and classified uses are explained in Clauses A1 of the Building Code and in the Definitions at the start of this Compliance Document.
| Date | Alterations | ||
|---|---|---|---|
| First published | July 1992 | ||
| Amendment 1 | September 1993 | pp. vi – viii, References | |
| Amendment 2 | 1 December 1995 | pp. i and ii, Document History | p. iv, G14.3.2 (d) |
| Second edition | 21 June 2007 | Document revised – second edition issued | |
| Note: Page numbers relate to the document at the time of Amendment and may not match page numbers in current document. | |||
Document Status
The most recent version of this document, as detailed in the Document History, is approved by the Chief Executive of the Department of Building and Housing. It is effective from 21 June 2007 and supersedes all previous versions of this document.
People using this Compliance Document should check for amendments on a regular basis. The Department of Building and Housing may amend any part of any Compliance Document at any time. Up-to-date versions of Compliance Documents are available from www.dbh.govt.nz
2
New Zealand Building Code
Clause G14 Industrial Liquid Waste
This Clause is extracted from the New Zealand Building Code contained in the First Schedule of the Building Regulations 2005.
FIRST SCHEDULE–continued
Clause G14 INDUSTRIAL LIQUID WASTE
|
Provisions OBJECTIVE G14.1 The objective of this provision is to safeguard people from injury or illness caused by infection or contamination resulting from industrial liquid waste. FUNCTIONAL REQUIREMENT G14.2 Buildings in which industrial liquid waste or foul water is generated shall be provided with adequate spaces and facilities for the safe and hygienic collection, holding, treatment and disposal of the waste. PERFORMANCE G14.3.1 Industrial liquid waste or foul water shall be conveyed to storage containers and within disposal systems in a way that will: (a) Transfer wastes from buildings safely and hygienically, (b) Avoid the likelihood of blockage and leakage, (c) Avoid the likelihood of foul air and gases entering buildings, and (d) Provides reasonable access for clearing of blockages. G14.3.2 Facilities for the storage, treatment, and disposal of industrial liquid waste must be constructed— (a) with adequate capacity for the volume of waste and the frequency of disposal; and (b) with adequate vehicle access for collection if required; and (c) to avoid the likelihood of contamination of any potable water supplies in compliance with Clause G12 "Water Supplies"; and |
Limits on application |
3
FIRST SCHEDULE–continued
| Provisions | Limits on application |
|---|---|
|
(d) to avoid the likelihood of contamination of soils, ground water, and waterways except as permitted under the Resource Management Act 1991; and (e) from materials that are impervious both to the waste for which disposal is required, and to water; and (f) to avoid the likelihood of blockage and leakage; and (g) to avoid the likelihood of foul air and gases accumulating within or entering into buildings; and (h) to avoid the likelihood of unauthorised access by people; and (i) to permit easy cleaning and maintenance; and (j) to avoid the likelihood of damage from superimposed loads or normal ground movements; and (k) if those facilities are buried underground, to resist hydrostatic uplift pressures. |
Amend 1 Jun 2007
4
Contents
| Page | |
|---|---|
| References | 7 |
| Definitions | 11 |
| Verification Method G14/VM1 | 13 |
| 1.0 General | 13 |
| 1.1 Scope | 13 |
| 1.2 Treatment and disposal | 13 |
| 1.3 Related Compliance Documents | 16 |
| 1.4 Location of collection, storage and treatment facilities and disposal systems | 16 |
| 1.5 Materials of construction | 16 |
| 1.6 Avoidance of contamination | 17 |
| 1.7 Separation of wastes | 17 |
| 1.8 Vehicle access | 17 |
| 1.9 Security | 17 |
| 2.0 Conveyance of industrial liquid wastes | 17 |
| 2.1 Layout | 17 |
| 2.2 Drainage | 18 |
| 2.3 Piping | 18 |
| 2.4 Pumps | 20 |
| 3.0 Storage or treatment tanks | 22 |
| 3.1 General | 22 |
| 3.2 Resistance to loads | 22 |
| 3.3 Liquid hazardous waste | 22 |
| Acceptable Solution G14/AS1 | 25 |
| 1.1 Security | 25 |
| 1.2 Acceptable disposal systems | 25 |
| Index | 27 |
5
6
预览内容由文件识别整理,表格、公式及文字请以原始文件为准。
原文图片预览
PAGE IMAGES下载标准文件
Clause-G14-Industrial-Liquid-Waste
英语 · PDF · 6 页 · 516.81 KB



