HG/T 2129.12-1991 Flange straight pipes for chemical equipment parts made of acid-resistant phenolic plastics
time:
2024-08-13 11:19:27
- HG/T 2129.12-1991
- in force
Standard ID:
HG/T 2129.12-1991
Standard Name:
Flange straight pipes for chemical equipment parts made of acid-resistant phenolic plastics
Chinese Name:
耐酸酚醛塑料制化工设备零部件 凸缘式直管
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1991-08-19 -
Date of Implementation:
1992-01-01
Standard ICS number:
Chemical Technology>>Chemical Equipment>>71.120.99 Other Chemical EquipmentChina Standard Classification Number:
Chemical Industry>>Chemical Machinery and Equipment>>G91 Chemical Machinery and Equipment Parts
alternative situation:
Replaced by HG/T 2129-2009
Skip to download
Summary:
HG/T 2129.12-1991 Flange-type straight pipes for chemical equipment parts made of acid-resistant phenolic plastics HG/T2129.12-1991 Standard download decompression password: www.bzxz.net
Some standard content:
Scope of application
Chemical Industry Standard of the People's Republic of China
Flanged straight pipes made of acid-resistant phenolic plastic for chemical equipment parts
HG/T2129.12-91
This standard applies to flanged straight pipes made of acid-resistant phenolic plastic with an allowable temperature of -30C~130℃ and an allowable pressure as specified in the table below. 2 Reference standards
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastic 3 Types and basic dimensions
Types and basic dimensions are as specified in the figure and table below 4 Enlarged
Note: Unspecified corners>3mm
Chemical Industry of the People's Republic of China Approved by the Ministry of Industry on August 19, 1991, implemented on January 1, 1992
Nominal diameterWww.bzxZ.net
HG/T2129.12-91
Mass, kg
Note: For pipes with nominal diameters of 33,
54, 78 and other special requirements, the quality inspection, packaging, storage and transportation of raw materials and products can be negotiated. The quality inspection, packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2128. 5 Marking example
Allowable pressure at room temperature
MPa(kgf/cm)
0.15 (1.5)
0.13 (1.3)
Acid-resistant phenolic plastic flange straight pipe with nominal diameter DN=32mm and length L=500mm is marked as: Straight pipe DN32×500HG/T2129.12-91
Additional instructions:
This standard is proposed by China National Chemical Equipment Corporation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute, and the main drafters of this standard are He Jingbing and He Jin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Chemical Industry Standard of the People's Republic of China
Flanged straight pipes made of acid-resistant phenolic plastic for chemical equipment parts
HG/T2129.12-91
This standard applies to flanged straight pipes made of acid-resistant phenolic plastic with an allowable temperature of -30C~130℃ and an allowable pressure as specified in the table below. 2 Reference standards
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastic 3 Types and basic dimensions
Types and basic dimensions are as specified in the figure and table below 4 Enlarged
Note: Unspecified corners>3mm
Chemical Industry of the People's Republic of China Approved by the Ministry of Industry on August 19, 1991, implemented on January 1, 1992
Nominal diameterWww.bzxZ.net
HG/T2129.12-91
Mass, kg
Note: For pipes with nominal diameters of 33,
54, 78 and other special requirements, the quality inspection, packaging, storage and transportation of raw materials and products can be negotiated. The quality inspection, packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2128. 5 Marking example
Allowable pressure at room temperature
MPa(kgf/cm)
0.15 (1.5)
0.13 (1.3)
Acid-resistant phenolic plastic flange straight pipe with nominal diameter DN=32mm and length L=500mm is marked as: Straight pipe DN32×500HG/T2129.12-91
Additional instructions:
This standard is proposed by China National Chemical Equipment Corporation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute, and the main drafters of this standard are He Jingbing and He Jin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 9978-1999 Terminology of casting machinery
- GB/T 15646-1995 General technical requirements for VHS video recorder tape transport mechanisms
- GB/T 2423.12-1997 Environmental testing for electric and electronic products Part 2: Test method Test Fda: Broadband random vibration - High reproducibility
- JB/T 7963.1-1997 Metal cutting band saw blades Part 1 Definitions and terms
- SJ 20224-1992 Detailed specification for flame retardant copper-clad epoxy glass cloth laminates for printed circuit boards
- GB/T 8883-1988 Edible wheat starch
- GB 50235-1997 Code for construction and acceptance of industrial metal pipeline projects
- GB/T 14779-1993 The design requirement for human body templet in sitting
- HG/T 2820-1996 Nylon and polyester-nylon dipped canvas for conveyor belts
- GB 14161-1993 Mine safety signs
- SJ/T 10942-1996 Determination of sulfur (S) in color picture tube glass
- GB/T 4958.11-1988 Measurement methods for equipment used in terrestrial radio-relay systems Part 3: Measurements on emulation systems Section 3: Measurements on black-and-white and color television transmissions
- SJ/T 10243-1991 Microwave ceramic dielectric materials-Alumina ceramic substrates for microwave integrated circuits
- GB 4562-1984 Test method for braking performance of light motorcycles
- GB/T 39195-2020 Technical specifications for urban flooding risk investigation
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com