GB/T 2656-1981 Fatigue test methods for weld metal and welded joints
time:
2024-08-11 16:08:34
- GB/T 2656-1981
- Abolished
Standard ID:
GB/T 2656-1981
Standard Name:
Fatigue test methods for weld metal and welded joints
Chinese Name:
焊缝金属和焊接接头的疲劳试验法
Standard category:
National Standard (GB)
-
Date of Release:
1981-05-19 -
Date of Implementation:
1982-01-01 -
Date of Expiration:
2005-10-14
Standard ICS number:
Mechanical manufacturing>>Welding, brazing and low-temperature welding>>25.160.40 Welded jointsChina Standard Classification Number:
Machinery>>Processing Technology>>J33 Welding and Cutting
Review date:
2004-10-14Drafting Organization:
Harbin Welding InstituteFocal point Organization:
National Welding Standardization Technical CommitteePublishing Department:
National Standardization AdministrationCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
GB/T 2656-1981 Fatigue test methods for weld metal and welded joints GB/T2656-1981 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
National Standard of the People's Republic of China
Fatigue Test Method for Weld Metal and Welded Joint GB2656-81
1When fatigue test is carried out on weld metal and welded joint, the endurance strength (α-1) and stress-revolution curve under symmetrical alternating load shall be measured.
2The size and shape of the test specimen are shown in Figure 1 or Figure 2. The specimen in Figure 1 is tested on a "Nu" type testing machine, and the specimen in Figure 2 is tested on a "Moore" type testing machine. 8bzxZ.net
The First Ministry of Machinery Industry of the People's Republic of China issued
10~0 F29·2
No sharp edges allowed
Implemented on January 1, 1982
Harbin Welding Research Institute of the Ministry of Machinery Industry
Boiler Industry
Harbin
GB2656—81
3The sampling position of weld metal fatigue test specimens can refer to the provisions of GB2649-81 "Method for Sampling of Mechanical Properties of Welded Joints". The sampling position of weld joint fatigue test is stipulated in the corresponding technical conditions. The weld is located in the middle of the specimen, and the reinforcement part must be cut off.
4 The number of specimens for fatigue test shall not be less than 6. 5The measurement of the specimen, the requirements for the testing machine, and the calculation of the test results shall be in accordance with the provisions of YB40--64 "Metal Bending Fatigue Test Method".
6 The test report should include the specimen type, size, sampling location, measured endurance strength (0-1 kgf/mm2), stress-revolution curve, fracture location and characteristics, and the presence or absence of pores, cracks, slag inclusions or other defects.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Fatigue Test Method for Weld Metal and Welded Joint GB2656-81
1When fatigue test is carried out on weld metal and welded joint, the endurance strength (α-1) and stress-revolution curve under symmetrical alternating load shall be measured.
2The size and shape of the test specimen are shown in Figure 1 or Figure 2. The specimen in Figure 1 is tested on a "Nu" type testing machine, and the specimen in Figure 2 is tested on a "Moore" type testing machine. 8bzxZ.net
The First Ministry of Machinery Industry of the People's Republic of China issued
10~0 F29·2
No sharp edges allowed
Implemented on January 1, 1982
Harbin Welding Research Institute of the Ministry of Machinery Industry
Boiler Industry
Harbin
GB2656—81
3The sampling position of weld metal fatigue test specimens can refer to the provisions of GB2649-81 "Method for Sampling of Mechanical Properties of Welded Joints". The sampling position of weld joint fatigue test is stipulated in the corresponding technical conditions. The weld is located in the middle of the specimen, and the reinforcement part must be cut off.
4 The number of specimens for fatigue test shall not be less than 6. 5The measurement of the specimen, the requirements for the testing machine, and the calculation of the test results shall be in accordance with the provisions of YB40--64 "Metal Bending Fatigue Test Method".
6 The test report should include the specimen type, size, sampling location, measured endurance strength (0-1 kgf/mm2), stress-revolution curve, fracture location and characteristics, and the presence or absence of pores, cracks, slag inclusions or other defects.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JJG 159-1994 Verification Regulation of Standard Dual Piston Type Pressurevacuum Gauge (Grade Ⅱ＆Ⅲ)
- JB/T 10323-2002 Connectors for main circuits of low-voltage withdrawable switchgear and control equipment
- HG/T 20676-1990 Brick lining chemical equipment
- HG/T 3585-1999 Liquid sodium borohydride
- JB/T 6417-1992 Air filter for air conditioning
- GB/T 12984-1991 Ergonomics－Basic terms for visual information processing
- JGJ 89-1992 Technical Standard for Sampling of Undisturbed Soil
- SN/T 1385-2004 Methods for quarantine and identification of Cuscuta L.
- JJG石油 31-1994 JJG Petroleum 31-1994 Integrated temperature transmitter
- GB/T 20002.1-2008 Drafting for special aspects in standards—Part 1:Child safety
- GB/T 5566-2003 Test method for the flattening resistance of rubber or plastic hoses
- JB/T 8310.3-1996 Optical fiber cable connectors Part 3 Optical fiber cable terminal junction boxes
- GB 30000.13-2013 Rules for classification and labelling of chemicals—Part 13:Substances and mixtures which,in contact with water,emit flammable gases
- NY/T 1464.28-2010 Pesticide guidelines for the field efficacy trials—Part 28:Insectides against broad-leaved tree longicorn beetle
- JGJ/T 14-1995 Technical specification for small concrete hollow blocks JGJ/T14-95
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com