GB/T 546-1997 Hall anchor

This standard specifies the product classification and technical conditions of Hall anchors. This standard applies to Hall anchors used on various types of ships and offshore structures. GB/T 546-1997 Hall anchor GB/T546-1997 standard download decompression password: www.bzxz.net

ICS 47.020. 50
National Standard of the People's Republic of China
GB/F 546 1997
Hallanchor
Published on August 27, 1997
Implemented on June 1, 1998
Published by the State Technical Supervision Bureau
GB/T546—1997
With the continuous advancement of manufacturing technology, the equipment to ensure the safety of ships has not only expanded the scope of regulations, but also put forward new requirements for the chemical analysis of materials, product testing methods, etc. As the current GB54:764 steel standard in my country could not meet the new requirements, the standard was revised in accordance with foreign standards and my country's steel seagoing ship performance and construction standards to make the specification series, material chemical composition and product test methods consistent with the international standards and meet the international standards. This standard was first published as a ministry standard in March 1956, namely Cm26-19 standard type and size, and CB25-59 was revised in 1965. The revised version was upgraded to national standard GR546-55. In 1975, it was revised to B546-76. This is the third revision of the hydraulic standard. This international standard will take effect on Sunday (13546-76). This standard was proposed by Changshan Zhongwang Ship Industry Corporation: This standard is difficult to be issued by Jiangliu Fat Factory. This standard was drafted by the General Technical Research Institute of China Shipbuilding Industry Corporation. According to the design of the ship, the seventh research project of China Shipbuilding Industry Corporation was completed. Four institutes·Unit: 403, the main contributors of this standard: Zhang Gudu, Zhu Baoxin, Li Hua, Yuan Dingsan. 1 Scope
National Standard of the People's Republic of China
Hall Anchor
Halinnchnr
This standard specifies the product classification, technical requirements and parts of the Hall Anchor. This standard is applicable to the needs of ships and offshore structures. 2 Reference Standard
0B/T546—1997
Substitute CB 516 -rG
The clauses contained in the following subtitles are used as the text of this standard by reference in the wood standard. When this standard is published, the versions shown are valid. All standards will be revised. If you are interested in using this standard, you should consider the possibility of using the latest version of the following standards. GBT547·91-1/r548-19e Anchor Technical Conditions
3 Product Classification
Rectangular Ten Seat Pin
B Plastic One-Shaped Stem Anchor
C Type - Cabinet Shadow Short Stem Seat Anchor
3.1 Type and Type of A Type Anchor Basic size connection diagram and table: Approved by the State Technical Supervision Bureau on August 27, 1997 and implemented on June 1, 1998
/1546-1997
Tip point
1--Type error 2 Shot melon 3 Cream [: Small pull: 5. Heat map 1
GB/T546-1997
3.2B type solid error type test ball size connection diagram and table 1 Pulse point
Type plant:: 2 finger down: 3 altar 1:1 small pin: 5-horizontal pin map 2
GB/T546-1997
3. 3 The type of wine and the size of the book are connected to Figure 3 and the table AE
1 type expansion: wrong "small axis: 5 change pin
Key points of the text
GET :47
Pin text quantity
￥4611
1 ca5 695:
. 222: 222
150513:6
16261151
231602
2 432,2
CB/T546—1957
1《Make,
219021902032
: GI: :
553 G35 | |tt | t||2 921717
28041657
28631696
28201034
3 2s2 u:
2 0792035
12672 165
G/T 546- 1997
Table 1)
268:16
2 51:1435
375.215511
312621
3 1732 233
3225.2268
23/Tat?
1x x00
26 000
23 60c
2e Goe
33 91:
35 5 parent
42 090
3.4 ​​Marking example,
G/T546-19S7
J72514
402112 658
46972716
1272 23
4 3912963
463413070
4777165
Nominal weight is 545kg: Type A anchor: 551
A anchor A6450GB/T546-197
Nominal weight is 2850kgType B anchor:
B2650GB/T546-1
Nominal weight is 64kgType B anchor:
B anchor 460G3-199
4 According to the technical provisions
1.1 The rotating part of the anchor should be polished and rotated flexibly. 4.2 After the anchor is inspected, it should be painted with a ball. 4Www.bzxZ.net
2 31:D
4 0:213 833
4.3 Other technical parts shall comply with the relevant provisions of E/T548. 5 For anchors, the relevant provisions of GB and T547 shall apply. L26F
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.