JB/T 10123-1999 Machine tool fixture parts and components movable iron claws
time:
2024-08-12 02:13:50
- JB/T 10123-1999
- in force
Standard ID:
JB/T 10123-1999
Standard Name:
Machine tool fixture parts and components movable iron claws
Chinese Name:
机床夹具零件及部件 活铁爪
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
Original standard number GB/T 12888-1991
Focal point Organization:
Mechanical Science Research InstitutePublishing Department:
Mechanical Science Research Institute
Description (Translated English) / downloadSkip to download
Summary:
JB/T 10123-1999 This standard specifies the dimensions of the movable jaws for the straight grooves of self-centering manual and motorized chucks with a diameter of 200 to 500 mm. This standard was first published in 1983 as JB 3397-83 and revised for the second time in 1991 as GB/T 12888-91. JB/T 10123-1999 Machine tool fixture parts and components movable jaws JB/T10123-1999 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
IC5 28.060.41
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
Issued on August 6, 1999
State Bureau of Machinery Industry
Implemented on January 1, 2000
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
Live iron melon
The paris and upper part of jigs and mixers Snftjawk
JI/T, 10123—1999
This standard specifies the live iron counter-joint size applicable to the self-centering and motorized chucks with a diameter of 200-5mm. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication of this standard, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. B-1985 Internal Angle Round HeaderWww.bzxZ.net
The dimensions are shown in the following figure and table:
Guohao Machinery Industry Bureau 1999-08-06 Approved 2000-01-01 Implementation
Chuck Diameter
Bone Spider Nail
CB Door 70
4 Marking
4.1 Marking Example
Basic Size +
Projection Deviation
Extreme Resistance Deviation Upper B
Basic One
Extreme Deviation Close H9
12 675
Live iron with a straight line of 200m:
JB/10123—1999
Live iron/K200JD/T10123—1999
..--.0.000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
Issued on August 6, 1999
State Bureau of Machinery Industry
Implemented on January 1, 2000
Standard of the Machinery Industry of the People's Republic of China
Parts and components of jigs and fixtures
Live iron melon
The paris and upper part of jigs and mixers Snftjawk
JI/T, 10123—1999
This standard specifies the live iron counter-joint size applicable to the self-centering and motorized chucks with a diameter of 200-5mm. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication of this standard, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. B-1985 Internal Angle Round HeaderWww.bzxZ.net
The dimensions are shown in the following figure and table:
Guohao Machinery Industry Bureau 1999-08-06 Approved 2000-01-01 Implementation
Chuck Diameter
Bone Spider Nail
CB Door 70
4 Marking
4.1 Marking Example
Basic Size +
Projection Deviation
Extreme Resistance Deviation Upper B
Basic One
Extreme Deviation Close H9
12 675
Live iron with a straight line of 200m:
JB/10123—1999
Live iron/K200JD/T10123—1999
..--.0.000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- QB/T 1588.3-1992 General technical requirements for light industrial machinery assembly
- SN/T 1372-2004 Inspection procedures for safety requirements of liquid heating appliances for import and export
- HG/T 20519.22-1992 Thermal insulation material table
- GB 8791-1988 Occupational acute formaldehyde poisoning diagnostic criteria and treatment principles
- JB/T 8052-1996 Non-lubricated liquefied petroleum gas circulating compressor
- GB 5274-1985 Gas analysis - Preparation of mixed gases for calibration - Weighing method
- GB/T 4451-1984 Industrial automation instrument vibration (sinusoidal) test method
- JJG 700-1999 Verification Regulation of Gas Chromatograph
- GB 18282.1-2000 Chemical indicators for sterilization of medical and health care products Part 1: General
- JB/T 3047-1999 Tapping machine tool accuracy inspection
- SY/T 5539-2000 Oil well tubular product quality evaluation method
- JB/T 9906.2-1999 Technical requirements for internal grinding machines
- GB/T 18720-2002 Graphic technology--The application of printing control strip
- CB/T 3897-1999 Marine 16~125A plugs, sockets and connectors
- GBZ 16-2002 Diagnostic criteria for occupational acute toluene poisoning
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]