GB/T 4607-1984 Main dimensions and installation of No. 90 traction pins for road semitrailer saddles, interchangeable dimensions
time:
2024-08-05 07:55:10
- GB/T 4607-1984
- Abolished
Standard ID:
GB/T 4607-1984
Standard Name:
Main dimensions and installation of No. 90 traction pins for road semitrailer saddles, interchangeable dimensions
Chinese Name:
道路车辆 半挂车鞍座90号牵引销主要尺寸和安装,互换性尺寸
Standard category:
National Standard (GB)
-
Date of Release:
1984-07-31 -
Date of Implementation:
1985-05-01 -
Date of Expiration:
2006-06-01
Standard ICS number:
Road Vehicle Engineering>>Road Vehicle Devices>>43.040.50 Transmission and Suspension DevicesChina Standard Classification Number:
Vehicles>>Trailers>>T72 Traction Device
alternative situation:
Replaced by GB/T 4607-2006Procurement status:
=ISO 4086-82
Review date:
2004-10-14Drafting Organization:
Changchun Automobile Research InstituteFocal point Organization:
National Automobile Standardization Technical CommitteePublishing Department:
National Development and Reform CommissionCompetent Authority:
National Development and Reform Commission
Description (Translated English) / downloadSkip to download
Summary:
GB/T 4607-1984 Road vehicles Semi-trailer saddle No. 90 towing pin main dimensions and installation, interchangeable dimensions GB/T4607-1984 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
National Standard of the People's Republic of China
Main dimensions and mounting/interchangeability dimensions of No. 90 tractor pins for road vehicle semi-trailer saddles
UDC629.114.3
GB4607-84
Road vehicles 9ose mi-trailer fifth wheel coupling pin Basic and
mounting/interchangeability dimensions This standard is equivalent to the standard IS04086-1982 "No. 90 tractor pins for road vehicle semi-trailer saddles-Main dimensions and mounting/interchangeability dimensions". This standard applies to tractor pins for semi-trailer saddles with a maximum gross weight (mass) greater than 50t and less than or equal to 100t. Www.bzxZ.net
The type and dimensions are specified in Figure 1.
The dimensions of mounting and interchangeability are specified in Figure 2 or Figure 3. R
Additional Notes:
Explosion Control 6202
..+'rh
2116 3
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of Changchun Automobile Research Institute. This standard was drafted by Changchun Automobile Research Institute and the Highway Research Institute of the Ministry of Communications. The main drafters of this standard are
Yu Fanglin and Yang Deyou.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Main dimensions and mounting/interchangeability dimensions of No. 90 tractor pins for road vehicle semi-trailer saddles
UDC629.114.3
GB4607-84
Road vehicles 9ose mi-trailer fifth wheel coupling pin Basic and
mounting/interchangeability dimensions This standard is equivalent to the standard IS04086-1982 "No. 90 tractor pins for road vehicle semi-trailer saddles-Main dimensions and mounting/interchangeability dimensions". This standard applies to tractor pins for semi-trailer saddles with a maximum gross weight (mass) greater than 50t and less than or equal to 100t. Www.bzxZ.net
The type and dimensions are specified in Figure 1.
The dimensions of mounting and interchangeability are specified in Figure 2 or Figure 3. R
Additional Notes:
Explosion Control 6202
..+'rh
2116 3
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of Changchun Automobile Research Institute. This standard was drafted by Changchun Automobile Research Institute and the Highway Research Institute of the Ministry of Communications. The main drafters of this standard are
Yu Fanglin and Yang Deyou.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 8870-1988 Data format for digital control point, linear motion and contour control systems for machine tools
- GB/T 3884.2-2000 Chemical analysis methods for copper concentrates - Determination of gold and silver content
- SY/T 5372-1991 Layered water injection operation method
- GB/T 13861-2009 Classification and code for the hazardous and harmful factors in process
- JB/T 4355-1993 Mine centrifugal ventilator
- JB/T 6444-1992 General technical conditions for fan packaging
- GB/T 16306-1996 Procedures and the plan of sampling for repeat test or inspection in product quality audit
- QB/T 1431-1992 Methyl cedryl ketone
- GB/T 16784.1-1997 After-sale service of industrial products Part 1:General principle
- SY 4024-1993 General Rules for Quality Inspection and Assessment of Petroleum Construction Projects
- GB/T 9117.3-2000 Tongue and groove socket welding steel pipe flange
- GB/T 15682-1995 Rice cooking test quality assessment
- GB 9105-1988 Photochromic glass lens blanks
- JB/T 7306-1994 Technical requirements for crawler bulldozers
- GB/T 10001.2-2002 Public information graphical symbols for use on sign--Part 2:Symbols for touring facilities and services
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]