
Technical data of Type DB-474 electronic glass
time:
2024-07-14 14:32:52
- SJ/T 10588.21-1994
- Abolished
Standard ID:
SJ/T 10588.21-1994
Standard Name:
Technical data of Type DB-474 electronic glass
Chinese Name:
DB-474型电子玻璃技术数据
Standard category:
Electronic Industry Standard (SJ)
-
Date of Release:
1994-08-08 -
Date of Implementation:
1994-12-01 -
Date of Expiration:
2008-01-20
China Standard Classification Number:
General>>Standardization Management and General Provisions>>A01 Technical Management
alternative situation:
Replaced by SJ/T 11369-2007

Skip to download
Summary:
SJ/T 10588.21-1994 Technical data of DB-474 electronic glass SJ/T10588.21-1994 Standard download decompression password: www.bzxz.net

Some standard content:
Electronic industry standard of the People's Republic of China
SJ/T 10586~105S294
Electronic glass technical data1994-08-08Release
1994-12-01Implementation
The Ministry of Electronics Industry of the People's Republic of China has issued the electronic industry standard of the People's Republic of China
Technical data of.type DH-474 electronic glass
Technical data of.type DH-474 electronic glass Subject content and applicable scope This standard specifies the chemical composition and physical and chemical performance indicators of DB-474 electronic tubes. This standard is applicable to glass materials used in color picture tubes, etc. 2 Reference standards CISDOO CE9622 GT/T14G17 3 Technical requirements for the general specification of the casing 3.1 Chemical composition See Table 1. 50. 21-1. 3 4.x0 +0. 15 s0+613 3.15+0.13 23. ou - 0. 20 s. su+u, 15
3- 30 1. 0, [5
Continued c, as miscellaneous, not counting the percentage of the group, 3. 2 Physical and chemical properties are listed in Table 3
People's Republic of China Electronic Industry 1994-8-08 approved SJ/T 10588.21 S4
GB uut. 2
GBuuo,7
GE 20u.-1bzxZ.net
GB JGJU..2
GB gCK..2
1594-12-01 implemented
SJ/T 10538. 21-94
~310C stock A average line hot grinding account model soft ratio point
Annealing point
Sequence change point
6MHz 21 according to the angle tangent value
30 volume resistivity g
K line win system effect (n.06mm, 35keV)
Water resistance chemical ranking
(07. $±C.7)X10-1
3. 91+3. 915
665±3
495±3
365,06
Test method
GB 9622-2
H5h224
GE 9G22.5
GB9622.8*1
GB/E 14D12
Article 4.5. 4
G89623.11
Method: 2) The 4.5 and 1.6 are combined and carried out according to the following regulations: the measurement starts from the starting point, keeps at 300℃ for 10min, starts full measurement, continues to increase the furnace standard, measures 10 times at the height, and measures at the height of 3 stations. Additional remarks:
This standard was drafted by the Standardization Research Institute of the Ministry of Industry and Information Technology under the Ministry of Electronics Industry. The main drafters of this standard are: Su Mei, Du Chengju, 55
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
SJ/T 10586~105S294
Electronic glass technical data1994-08-08Release
1994-12-01Implementation
The Ministry of Electronics Industry of the People's Republic of China has issued the electronic industry standard of the People's Republic of China
Technical data of.type DH-474 electronic glass
Technical data of.type DH-474 electronic glass Subject content and applicable scope This standard specifies the chemical composition and physical and chemical performance indicators of DB-474 electronic tubes. This standard is applicable to glass materials used in color picture tubes, etc. 2 Reference standards CISDOO CE9622 GT/T14G17 3 Technical requirements for the general specification of the casing 3.1 Chemical composition See Table 1. 50. 21-1. 3 4.x0 +0. 15 s0+613 3.15+0.13 23. ou - 0. 20 s. su+u, 15
3- 30 1. 0, [5
Continued c, as miscellaneous, not counting the percentage of the group, 3. 2 Physical and chemical properties are listed in Table 3
People's Republic of China Electronic Industry 1994-8-08 approved SJ/T 10588.21 S4
GB uut. 2
GBuuo,7
GE 20u.-1bzxZ.net
GB JGJU..2
GB gCK..2
1594-12-01 implemented
SJ/T 10538. 21-94
~310C stock A average line hot grinding account model soft ratio point
Annealing point
Sequence change point
6MHz 21 according to the angle tangent value
30 volume resistivity g
K line win system effect (n.06mm, 35keV)
Water resistance chemical ranking
(07. $±C.7)X10-1
3. 91+3. 915
665±3
495±3
365,06
Test method
GB 9622-2
H5h224
GE 9G22.5
GB9622.8*1
GB/E 14D12
Article 4.5. 4
G89623.11
Method: 2) The 4.5 and 1.6 are combined and carried out according to the following regulations: the measurement starts from the starting point, keeps at 300℃ for 10min, starts full measurement, continues to increase the furnace standard, measures 10 times at the height, and measures at the height of 3 stations. Additional remarks:
This standard was drafted by the Standardization Research Institute of the Ministry of Industry and Information Technology under the Ministry of Electronics Industry. The main drafters of this standard are: Su Mei, Du Chengju, 55
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6940.2-1993 Types and basic parameters of complete sets of down processing equipment
- JB/T 8325.1-1996 Simple heavy horizontal lathe accuracy
- GB/T 9238-1998 Graphical symbols for balancing machines and their instruments
- GB 2731-1988 Hygienic Standard for Ham
- GB/T 15498-2003 Enterprise standard system?Administrative standard system and duty standard system
- JB/T 10347-2002 Friction lining for friction hoists
- GB 16151.11-1996 Technical conditions for safety in operation of agricultural machinery - Compound and semi-compound threshers
- GB/T 5299-1985 Picture image area and photographic sound record on 16mm motion-picture release prints-Positions an
- JB/T 9933.2-1999 Accuracy test of small module gear hobbing machine
- SY 6043-1994 Safety regulations for disassembly and assembly of drilling equipment
- GB 11793.1-1989 PVC plastic window building physical properties classification
- GB/T 11298.1-1997 Measurement methods for satellite television earth receiving stations System measurement
- GB/T 19142-2008 Packaging for export commodity general rule
- GB/T 4170-1984 Technical requirements for plastic injection mold parts
- QB/T 1547-1992 Determination of firing temperature range of ceramic materials
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com