QB 1792-1993 dl-synthetic menthol

This standard specifies the technical requirements, test methods and inspection rules of dl-synthetic menthol. This standard is applicable to dl-synthetic menthol made from citronellal as the main raw material. QB 1792-1993 dl-synthetic menthol QB1792-1993 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB1769~-1801-93
Spice Standard
(Product Standard)
Issued on April 29, 1993
Implementation on December 1, 1993
Issued by the Ministry of Light Industry of the People's Republic of China
1 Content and Applicable Scope
UKAONKAca
Industry Standard of the People's Republic of China
Q 1782--93
-Synthetic Menthol
This standard does not specify the contents, test methods and inspection rules of synthetic menthol. This standard is applicable to 1-synthetic menthol made with fermented menthol as the main raw material. 2 Reference standards GB11539 Gas chromatography analysis of isolated synthetic spices GB/T14454.3 Color determination of shell materials GB/T 14454.2 Aroma evaluation method of aromatics GB/T14454.6 Determination of odor of spices GB/T14454.7 Determination of odor of spices GB/T I4137.1
Monoisocyanate ethanol solution method GD/T14454.6 Evaluation of the content of the product after the release of the product 3 Product name, molecular formula, structural formula, molecular weight Chemical name 2-cyclohexyl-5-hydroxyethyl) CHo
Structural formula
156.27 (converted to 1967 international standard) Molecular weight
4 Technical requirements
4.1 Color quickly changes from white to colorless. 4.2 The test odor is thin.
First rising point 27.0~28.0
4.3 Refining point (℃)
Second freezing point 30.5~32.0.
4,4Specific density (25)
4.5Readability (25)
-2.0°~ +2.0°.
1g of sample falls into 70 (V/V) ethanol 5ml. Ministry of Light Industry of the People's Republic of China, approved on April 29, 1993, sold on December 1, 1993
4.6 Non-volatile matter (hereinafter referred to as non-volatile matter)
5 Bin Camel method
5.1 Determination of color
See GB/T [4464.1.
5.2 Evaluation of aromawww.bzxz.net
GE/T 1=454.2.
5.3 Determination of temperature
GB/T14464-7:
With the following supplements:
The sample is plated with 20g
QB1792-93
The standard increase temperature is greater than the old measurement range, 3.2 also divided into systems. Stir the sample in the test tube regularly, let it start to solidify, and keep it in the tea chamber for about 1 degree. Then, raise the temperature to 1 degree and keep it unchanged for about 1 minute. The temperature at this time is the second freezing point of the sample. The temperature should not be increased by 1 degree. Keep it unchanged for about 1 minute. The temperature at this time is the second freezing point of the sample. The method for measuring the temperature of the sample is not applicable to the company. See Appendix 5.4 [Determination of specific temperature, 25℃
See CB/1444.5.
Formula: 100ml (/V)2, grind to 100ml, 25℃
PGE/T14457.1.
5.6 Determination of non-volatile matter
GB/T14454.6.
6 Inspection regulations
6.11 The finished products of synthetic thin films shall be inspected by the inspection department of the manufacturer. The manufacturer shall ensure that all products meet the requirements of the standard: Each batch of products shall be accompanied by a quality certificate, including: manufacturer name, product name and trademark, production date (mandatory), product quality certificate and standard number. 6.2 The inspection unit shall inspect the quality of each batch of products according to the quality standards to see whether it meets the requirements of the standard. Each batch shall be inspected once, and different batches shall be inspected separately. 6.3 For each batch of packaging, one unit shall be selected if the number is less than 1, and two units shall be selected if the number is less than 10. After packaging, if the product is solid, it should be inspected again after the degassing film is removed. The product should be cleaned of impurities and then the sample should be evenly distributed. Each sample should be collected by suction tube for 5 to 1m, injected into the sample mixer, and divided into two clean glass bottles with sandpaper holders. The bottles should be marked with the date: manufacturer name, product name, batch number, production date, number and sample collection date: one bottle is for inspection and the other bottle is reserved.
6.4 If one of the indicators in the acceptance results does not meet the requirements of this standard, the manufacturer may conduct a double sampling re-inspection. If the overall results still have indicators that do not meet the requirements, the batch of products cannot be accepted. 6.5 When the supplier has objections to the product quality, the two parties shall resolve it through negotiation or invite a statutory testing organization to request it, and the supplier shall be responsible for the result.
.— 98
QB1792—93
uKAONIKAca
6.6 Color, gas, point, symptom, factory delivery, etc. Decomposition, non-elastic material is the type inspection index, each time
7 Marking, packaging, transportation, layout
.1 A finished product should be packed in a small amount of money or a small amount of money, and cannot be packed in a barrel. The product name, production service, surface mark, I! , clean again, double, factory delivery, production period and production safety standard, if the ordering unit has special requirements, it can be negotiated with the small production unit.
7.2 This product has no aging, color standard of the product, yin source: away from the fire source: prevent the month of the palace, and the transportation should comply with the relevant regulations.
.3 Under the condition of complying with the specified transportation conditions, complete packaging and no unauthorized use, the shelf life of the product is one year. - 99 -
A Quick Display
QB1792-93
Appendix
- Determination of the content of the lung of the infected person by gas chromatography-mass spectrometry (next year)
A1.1 Chromatography instrument, recorder and microprocessor shall be as specified in Chapter 5 of B11539.
Filling column length m, inner diameter s~4mm.
Phase PEC2IM, %10% ChromEcrhWAWLIMCS61-BDH A1.3 Detector
Chlorine flame ionization detector.
A2 Operation conditions
A2.1 Heat the color furnace from 70 to 200℃, speed/i. Injection 210
Detector 2100.
Carrier gas flow rate
Gas, 25ml/min
A Determination of column light
A3.1 Chemical properties test
The test shall be carried out according to the method specified in Article 8.1 of GB11539, and shall meet the requirements. A3.2 Column efficiency
The sample efficiency shall be determined according to the method specified in Article 8.2 of GB1169. A4 Test method
Internal normalization method shall be carried out according to the method specified in Article 10.4 of GB11539. A5 Heavy summer and fast fading display
It shall be carried out according to the provisions of Article 11, 4 of CB11530 and shall meet the requirements. Note:
This standard is proposed by the Light Industry Department. This standard is under the jurisdiction of the National Material Standardization Center. This standard is drafted by Shanghai United Spice Factory. The drafter of this standard shall be consulted.
tKAoNiKAca
The standard is based on the National Standard P.358 of 1988. From the date of implementation of this standard: the former Light Industry Department Standard 0758-81 is the latest (41)" working period: -10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.