GB/T 8456-2003 Textile machinery - Nominal diameters of circular knitting machines

This standard specifies the nominal diameter of circular knitting machines and the numerical marking of machine specifications. It applies to large-diameter, small-diameter and circular knitting machines and hoisting machines. It does not apply to jacquard knitting machines. GB/T 8456-2003 Textile machinery knitting machines, nominal diameter of circular knitting machines GB/T8456-2003 standard download decompression password: www.bzxz.net

GB/18456-2003/1S8117.1986
This standard is equivalent to the English version of 1S0811?1095 Textile machinery micro-needle frame machine-diagram machine standard 18117:1985.
For ease of use, the following are added without marking: a) Remove the foreword of the international standard:
) "Applicable to the entire Bureau\" is changed to \"standard", "this international standard\" is changed to "this standard"; d) "referenced standard" is changed to "normative reference", and quotation marks are added; d) The referenced international standard is replaced by the corresponding national standard (equivalent to the international standard); in the third paragraph, add "62-8 needle machine classification and terminology regulations, er
In GB/T 84582003*
This standard replaces 61T45F-17 needle circular knitting machine with a nominal diameter of 3. Its main technical consultation is not linked. The main differences between this standard and GBT54561387 version are as follows: [58] Take the "! The draft introduction is revised to make the national and international normative documents consistent with the text structure of the IS standard. The name of the standard is changed to textile machinery, knitting machines, circular machines, nominal diameters. 3. This standard was issued by the Technical Committee for Standardization of Textile Machinery Parts and Accessories (CSB1S/TC215) and is under the jurisdiction of the China Institute of Standardization. The main drafter of this standard is the Chinese Institute of Standardization. It was first issued in December 1597 and revised for the second time in February 2003. 1 Scope Textile machinery GB/TB456--2003/ISO 8117:1986 Nominal diameter of circular knitting machines
This standard specifies the nominal diameter of circular knitting machines and the numerical marking of machine specifications. It is used for large diameter, small diameter needle machines. It is not suitable for splitting machines.
2 Normative references bzxZ.net
The following documents are included in this standard through reference. For any reference to this document, all subsequent documents, including the revised content or revision, are not applicable. This standard applies. However, the parties to the agreement reached based on this standard may use the latest version of these documents. For any documents that are not updated, the latest version shall apply to this standard. 3/6C92.9-1087 Textile machinery terminology Knitting machine classification terminology ([739.184) G31845-2003 Machine carbon and accessories Knitting machine needle gauge TSA58: 1986.IDT3 public word diameter and code
for loom classification and technical provisions in G31 6H12.9-1987 Knitting machine needles are specified in G5/T358-2003. The following table shows the nominal diameters in meters and the mathematical symbols of the machine specifications. Table
Model knitting machine
Small diameter: mm
GB/T 8458-2003/1SO 8117,1986 Small diameter/ma
Society, the values ​​in the brackets should be avoided as much as possible, (continued)
Diameter machine
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.