GB/T 15706.1-1995 Basic concepts and general principles for mechanical safety Part 1: Basic terminology and methodology
time:
2024-08-08 16:05:05
- GB/T 15706.1-1995
- Abolished
Standard ID:
GB/T 15706.1-1995
Standard Name:
Basic concepts and general principles for mechanical safety Part 1: Basic terminology and methodology
Chinese Name:
机械安全 基本概念与设计通则 第1部分:基本术语、方法学
Standard category:
National Standard (GB)
-
Date of Release:
1995-09-22 -
Date of Implementation:
1996-06-01 -
Date of Expiration:
2007-09-01
Standard ICS number:
Environmental protection, health and safety >> 13.110 Mechanical safetyChina Standard Classification Number:
Machinery>>General Machinery>>J09 Health, Safety, Labor Protection
alternative situation:
Replaced by GB/T 15706.1-2007Procurement status:
ISO/TR 12100-1:1992,EQV
Review date:
2004-10-14Drafting Organization:
Mechanical Standardization Research Institute of the Ministry of MachineryFocal point Organization:
National Machinery Safety Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Skip to download
Summary:
This standard gives the basic terms and definitions of machinery safety and specifies the general design methods for achieving machinery safety. This standard applies to the design of various types of mechanical products, and also to the design of other technical products with similar hazards. GB/T 15706.1-1995 Basic concepts and general principles of mechanical safety Part 1: Basic terms and methodology GB/T15706.1-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG/T 2394-1992 Radial tire building machine series
- JB/T 997-1977 Welded branch pipe joint body
- QB/T 2490-2000 Polyethylene (PE) extruded sheet
- JB/T 10345-2002 Block eccentric self-synchronous horizontal screen
- HG/T 2047-1991 Technical requirements for rotary joints of soda ash steam calcining furnace
- GB/T 14999.3-1994 Longitudinal fracture test method for high temperature alloy bars
- GB/T 2532-1997 Brass strip for water tank water chamber
- GB/T 2424.2-1993 Basic environmental testing procedures for electrical and electronic products - Guidelines for damp heat testing
- GB/T 8424.1-2001 Textiles - Color fastness tests - General rules for determination of surface color
- HG/T 2907-1997 Dimensions of roll film for phototypesetting
- JB/T 9765.3-1999 Technical requirements for cylinder head nuts and flywheel nuts for internal combustion engines
- JB/T 6726.2-1993 Test method for internal combustion engine condensing radiator
- GB/T 2423.49-1997 Environmental testing for electric and electronic products Part 2: Test methods Test Fe: Vibration - Sine beat frequency method
- JB/T 3770-2000 Floor Grinder
- GB/T 13602-1992 Technical requirements for centralized control panels in ship navigation cabins
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com