HG/T 2353.4-1992 Compatibility test method for filter element for magnetic slurry filtration

HG/T 2353.4-1992 Test method for compatibility of filter elements for magnetic slurry filtration HG/T2353.4-1992 Standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Filter element for magnetic slurry filtration
Compatibility test method
Subject content and scope of application
This standard specifies the compatibility test method of filter element for magnetic slurry filtration and a specified liquid. This standard is applicable to filter element for magnetic slurry filtration in the magnetic recording material industry. Method Summary
HG/T2353.4-92
Under given conditions, the filter element is immersed in a specified liquid and the change in filter element performance is tested. 3 Test equipment and test liquid
3.1 Test equipment
Glass container for test liquid and water bath for heating, 3.2 Test liquid
The test liquid adopts a single solvent or mixed solvent for preparing magnetic slurry, 4 Test procedure
4.1 Filter element immersion
Immerse the filter element to be tested in the test liquid,
Put the glass container containing the test liquid and the filter element in a water bath for water bath heating, and stop heating when the temperature rises to about 60℃. After the constant temperature is maintained for 72 hours, take out the filter element and let it dry. 4.2 Filter element performance test
After the filter element is fully dried, inspect the appearance and external dimensions of the filter element according to the technical requirements of HG/T2352, and measure the filtration accuracy of the filter element.
5 Results
After testing according to the provisions of Article 4.2, the filter element that meets the requirements of various technical indicators is judged to be compatible. Otherwise, it is judged as unqualified.
Approved by the Ministry of Chemical Industry of the People's Republic of China on July 20, 199218wwW.bzxz.Net
Standard Exchange Network immbzsoso.cm1993-03-01Implementation
Additional Notes:
HG/T2353.4-92
This standard is proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the Magnetic Recording Material Standardization Technical Unit of the Ministry of Chemical Industry. This standard was jointly drafted by the Tenth Design Institute of the Ministry of Machinery and Electronics Industry, the 116th Factory of the Ministry of Aerospace Industry, and the Shanghai Xinjing Filtration Equipment Factory. The main drafter of this standard is Zhang Guanlong,
Standard Exchange Network mmm, bzeono.em Various standard industry materials are competitively charged for the download
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.