GB 13094-1997 Safety requirements for passenger car structures
time:
2024-08-08 11:41:55
- GB 13094-1997
- Abolished
Standard ID:
GB 13094-1997
Standard Name:
Safety requirements for passenger car structures
Chinese Name:
客车结构安全要求
Standard category:
National Standard (GB)
-
Date of Release:
1997-06-27 -
Date of Implementation:
1997-12-01 -
Date of Expiration:
2008-02-01
Standard ICS number:
Road Vehicle Engineering >> 43.020 Road Vehicle GeneralChina Standard Classification Number:
Vehicle>>Vehicle General>>T09 Health, Safety, Labor Protection
alternative situation:
Replaced GB/T 13094-1991; replaced by GB 13094-2007Procurement status:
≠ECE 36 AMD.03
Review date:
2004-10-14Drafter:
Zhang Bingrong, Sun Ying, Sun Jiakai, Zeng Guangzhao, Li Chao, Shu Xiuming, Li Nianlu, Yuan KeruiDrafting Organization:
Shanghai Passenger Car WorksFocal point Organization:
National Automobile Standardization Technical CommitteeProposing Organization:
Ministry of Transport of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Development and Reform Commission
Skip to download
Summary:
This standard specifies the safety requirements for bus structures. This standard applies to single-deck city buses, long-distance buses, tourist buses and articulated buses with a length of more than 7 meters. GB 13094-1997 Safety requirements for bus structures GB13094-1997 Standard download decompression password: www.bzxz.net
- Recommended standards
- QB/T 2254-1996 Sewing machine thread
- GB/T 3197-2001 Aluminium and aluminium alloy wire for welding electrodes
- JG/T 3015.1-1994 Sliding automatic door JG/T3015.1-94
- DL/T 575.7-1999 Ergonomic principles for the design of control centres Part 7 : Control room layout
- GB/Z 17625.6-2003 Electromagnetic compatibility limits for harmonic currents generated by equipment with a rated current greater than 16A in low-voltage power supply systems
- JB/T 1093-1983 Basic test methods for traction motors
- GB/T 25161.1-2010 Packaging sacks—Dimensional tolerances—Part 1:Paper sacks
- GB/T 4334.5-2000 Test method for corrosion of stainless steel by sulfuric acid and copper sulfate
- JB/T 10425.2-2004 Yaw system of wind turbine generator set Part 2: Test methods
- JB/T 8813-1998 Steering brake belt for crawler bulldozers
- JB/T 2001.45-1999 Four-valve distributor for water system (with servo) (PN=20, 31.5MPa)
- GB 9052.1-1998 Oil and gas field liquefied petroleum gas
- GB/T 8834-1988 Determination of relevant physical and mechanical properties of ropes
- SJ/T 10587.2-1994 Technical data of Type DM-308 electronic glass
- GB/T 6379.6-2009 Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com