Technical data of Type DM-308 electronic glass
time:
2024-07-14 14:47:43
- SJ/T 10587.2-1994
- Abolished
Standard ID:
SJ/T 10587.2-1994
Standard Name:
Technical data of Type DM-308 electronic glass
Chinese Name:
DM-308型电子玻璃技术数据
Standard category:
Electronic Industry Standard (SJ)
-
Date of Release:
1994-08-08 -
Date of Implementation:
1994-12-01 -
Date of Expiration:
2008-01-20
China Standard Classification Number:
General>>Standardization Management and General Provisions>>A01 Technical Management
alternative situation:
SJ 673-83
Skip to download
Summary:
SJ/T 10587.2-1994 DM-308 electronic glass technical data SJ/T10587.2-1994 standard download decompression password: www.bzxz.net
Some standard content:
Electronic industry standard of the People's Republic of China
SJ/T 10586~105S294
Electronic glass technical data
Electronic glass technical data1994-08-08 Issued
Implementation on 1994-12-01
Issued by the Ministry of Electronics Industry of the People's Republic of China Electronic industry standard of the People's Republic of China
Technical data of type D-308 electronic glass
Technical data of DM-308 elcetronte glass1 Title content and applicable scope
This standard sets the chemical formula, physical and chemical performance indicators of TM-318 electronic strength. This standard is applicable to quartz materials used in semiconductor device packaging, etc. 2. Reference standards
R9000 Standard method for chemical analysis
GB9622 Physical and chemical test method for self-isolation 3. Technical requirements
Chemical composition is shown in Table 1.
Beixueshao Station
Measurement Hundred
3. s +0. 3
Note.1) H,, as miscellaneous loss system.4 calculation is composed of self-divided, 3.2 Shortening performance index table 2
People's Republic of China Electronic Industry Household 1934-08-08 approved SJ/T 10587.2-54
673-93
Specifications and natural
OD DU), 2
Gl:9000.?
Gb 9G5G.10
GH 9006.14
1994-12 01 implementation
SJ/T 10587.294
n-·33 table due to internal and thermal factors. Softening coefficient n typical
temperature point
disk pet point
over 5MHz, product with 20C external quality without angle tangent signal 1g+×1℃ report A rate fire 0nM2a. Union goods (—1> familiar with the determination
water resistance chemical hidden qualitative design
additional statement:
whether the standard is out of the mountain sub-standard North Pump Width Institute of Standards
(48. 0±1. 0)×15-7
705+15
500±15
450±to
Big standard in seven three! , main seven four! Electronics industry department standardization fairy set goods responsibility from the share. No standard will be the car to start the grams: workers outside Liu Cheng are missing. 4 international standard 11573 grass tea. 194 March before the second order: -12bZxz.net
world strong for law
GB 9622. 2
CB 9622.4
1G39522.5
03 9622. 8
CP5522.11
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
SJ/T 10586~105S294
Electronic glass technical data
Electronic glass technical data1994-08-08 Issued
Implementation on 1994-12-01
Issued by the Ministry of Electronics Industry of the People's Republic of China Electronic industry standard of the People's Republic of China
Technical data of type D-308 electronic glass
Technical data of DM-308 elcetronte glass1 Title content and applicable scope
This standard sets the chemical formula, physical and chemical performance indicators of TM-318 electronic strength. This standard is applicable to quartz materials used in semiconductor device packaging, etc. 2. Reference standards
R9000 Standard method for chemical analysis
GB9622 Physical and chemical test method for self-isolation 3. Technical requirements
Chemical composition is shown in Table 1.
Beixueshao Station
Measurement Hundred
3. s +0. 3
Note.1) H,, as miscellaneous loss system.4 calculation is composed of self-divided, 3.2 Shortening performance index table 2
People's Republic of China Electronic Industry Household 1934-08-08 approved SJ/T 10587.2-54
673-93
Specifications and natural
OD DU), 2
Gl:9000.?
Gb 9G5G.10
GH 9006.14
1994-12 01 implementation
SJ/T 10587.294
n-·33 table due to internal and thermal factors. Softening coefficient n typical
temperature point
disk pet point
over 5MHz, product with 20C external quality without angle tangent signal 1g+×1℃ report A rate fire 0nM2a. Union goods (—1> familiar with the determination
water resistance chemical hidden qualitative design
additional statement:
whether the standard is out of the mountain sub-standard North Pump Width Institute of Standards
(48. 0±1. 0)×15-7
705+15
500±15
450±to
Big standard in seven three! , main seven four! Electronics industry department standardization fairy set goods responsibility from the share. No standard will be the car to start the grams: workers outside Liu Cheng are missing. 4 international standard 11573 grass tea. 194 March before the second order: -12bZxz.net
world strong for law
GB 9622. 2
CB 9622.4
1G39522.5
03 9622. 8
CP5522.11
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 17259-1998 Liquefied petroleum gas cylinders for motor vehicles
- JB/T 5000.6-1998 General technical conditions for heavy machinery steel castings
- GB/T 2529-1989 Copper conductive plate
- GB/T 13744-1992 The measurement of coating thickness for electrodeposited nickel coatings on magnetic and non-magnetic substracts
- QB/T 1823-1993 Dairy machinery model compilation method
- GB/T 14643.2-1993 Determination of soil flora in industrial circulating cooling water - Plate count method
- GB/T 9118.1-2000 Raised face welded ring loose sleeve steel pipe flange
- JB/T 7561-2002 Technical Specifications for WZ Series Eddy Current Brakes for Hoisting and Metallurgy
- JB/T 2294-1999 Axial flow AC exhaust fans
- GB/T 2891-1995 Test method for performance of filter-type gas masks
- JB/T 7077-2002 Technical specifications for YZRE series electromagnetic brake wound rotor three-phase asynchronous motors for hoisting and metallurgy
- JB/T 6708-1993 Technical requirements for starter commutators for tractors and internal combustion engines
- GB/T 15530.2-1995 Copper alloy butt welding flange
- JB/T 8074.2-1999 Technical requirements for manual self-centering chucks for machine tools
- GB 18165-2000 General technical requirements for small train type amusement rides
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com