QB/T 2212.11-1996 Construction tools (brick and mortar) Pointed spade

This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of pointed masonry trowels. This standard applies to the pointed masonry trowel No. 301 specified in QB/T 2212.1 "Terms of Construction Tools (Masonry)". QB/T 2212.11-1996 Construction Tools (Masonry) Pointed Masonry Trowel QB/T2212.11-1996 Standard download decompression password: www.bzxz.net

QB/T 2212.11--1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001-1985 "Terms of Construction (Masonry) Tools", ZBJ47002-1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into the light industry standard. In terms of the overall structure of the standard, the terminology of construction tools, general technical conditions and their product standards are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" is cancelled, and some of its relevant provisions are incorporated into the general technical conditions. The product standards are retained according to the numbers in the terminology, and a product standard "Diamond Masonry Shovel" is added. This standard changes the word "brick" in the brackets of the original name to "brick type" and puts it after the standard name "construction tools" to standardize the hand tools used in construction work and make clear limitations in the scope of application. This standard is a supporting standard. The terminology and general technical conditions are based on it. It retains the technical content in the original standard that has been proven to be suitable for my country's situation in practice. The main dimensions in the product standard have been optimized, the child specifications have been added, and the limit deviations have been indicated. This standard has modified and improved some quality indicators.
This standard will abolish ZBJ47001~47003-19 from the date of implementation. 85. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard are: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian House Equipment Tool Factory, Shanghai Fengmao Tool Factory No. 3, etc.
The main drafters of this standard are: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool Hardware Standardization Center for interpretation. 614
1 Scope
Light Industry Standards of the People's Republic of China
Construction Tools (Brick and Brick Type)
Pointed Masonry ShovelbZxz.net
QB/T 2212.11—1996
This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of pointed masonry shovels. This standard applies to the pointed masonry shovel No. 301 specified in QB/T2212.1 "Terms of Construction Tools (Masonry)". 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. QB/T2212.1—1996 Terminology of Construction Tools (Masonry) QB/T2212.2—1996
General Technical Conditions for Construction Tools (Masonry)" 3 Product Classification
The type of pointed masonry shovel is shown in Figure 1.
3.2 Main dimensions
The main dimensions of the pointed masonry spade shall be in accordance with the provisions of Table 1. Approved by China Light Industry Association on March 22, 1996
KAONKAca-
Implemented on December 1, 1996
Shovel length L
Limit deviation
QB/T 2212. 11-- 1996
Main dimensions
Shovel width B
Note: Special types and other dimensions may not be restricted by this table. 4 Technical requirements
The technical requirements of the pointed masonry spade shall be in accordance with the provisions of Chapter 4 of QB/T2212.2-1996. 5 Test methods
5.1 Dimension inspection
Measure with universal measuring tools.
5.2 Inspection of other items
Perform according to the provisions of Chapter 5 of QB/T2212.2-1996. 6 Inspection rules
Perform according to the provisions of Chapter 6 of QB/T2212.2--1996. 7 Packaging, marking, transportation, storage
Perform according to the provisions of Chapter 7 of QB/T2212.2--1996. 616
Limit deviation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.