Dangerous goods - Test method for bottom lift of large packaging

This standard is formulated for the first time. This standard specifies the test equipment, sample quantity, sample preparation, test steps and test report for the bottom lifting test of large packages of dangerous goods. This standard is applicable to the bottom lifting test of large packages of dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21602-2008 Test method for bottom lifting of large packages of dangerous goods GB/T21602-2008 Standard download decompression password: www.bzxz.net
This standard is formulated for the first time. This standard specifies the test equipment, sample quantity, sample preparation, test steps and test report for the bottom lifting test of large packages of dangerous goods. This standard is applicable to the bottom lifting test of large packages of dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations", and the degree of consistency is not equivalent. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Dangerous Chemicals Management Standardization (SAC/TC251). The
responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Lv Gang, Wang Libing, Xu Chuanlai, Li Ningtao, Wang Xiaobing, Zhao Lihua.
This standard is formulated for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this standard.
GB/T4122.1 Basic packaging terms
GB19432.1 General safety regulations for inspection of large packages of dangerous goods

National Standard of the People's Republic of China
GB/r 21602m2008
Dangerous Goods
Test Method for Bottom Lift of Large Package
Dunwerous Zoods--Test Methods for Bottom Lifi of Lire Pacekaging2008-04~01Published
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration
20080901Implementation
3, 2802-~-2
This standard should be related to the transportation of dangerous goods. The recommended transfer regulations are as follows, and the specific requirements are as follows. The relevant technical requirements are increased in the standard bottle implementation method according to (good 1.? 200) This standard is drafted by the SAC/TC51 Hazardous Chemicals Management Standards Committee. This standard was drafted by: Tianping Live Inspection Institute of Science and Technology: This standard was drafted by: Jiangnan University, Sinochem Chemical Standardization Research Institute, Wojin Exit Inspection and Quarantine. The main characters of this standard are: Pinzhou, Wang Chengying, Ji Chuanlai, Li Yuyou, Zhu Wanbing, Fan Hua. This standard is for observation
wm1 Scope
Hazardous Goods Large Package Bottom Lift Test Method B/ 27602-2008
This standard mainly stipulates the test equipment, test group number, test conditions, test steps and test quotation of large packaging bottom lifting test of dangerous goods.
This standard specifies the test equipment, test group number, test conditions, test steps and test quotation of large packaging bottom lifting test of dangerous goods.
This standard specifies the test equipment, test group number, test conditions, test conditions and test quotation of large packaging bottom lifting test of dangerous goods.
The following items in the standard are the technical terms of large packaging bottom lifting test of dangerous goods. They are the technical documents of the period of use. All the revisions (excluding the revisions) of ... 1083
pacKanings
out of a content of the goods I meat
maximum volume exceeding 1 value not the most
liner #liner
in addition to the container small and its to
uermissivlegroes
maximum permitted total quality nwwW.bzxz.Net
signed before. Drum on the basis of the interpretation of the game to send the latest version of the liquid meal of the parties applicable to this standard limit.
For this new design, use a micro-machine unloading method, which is really the best way to spray the most ultra-high-performance glass:
Research and develop the design and its balance of service volume plus the maximum evaluation volume suitable for all types of large containers:
4 Test equipment
Lung disease prevention vehicle
5 Test procedure
5.1 Test procedures
51. For large packages of equipment for delivery, including the inner packaging and articles used, the components shall be tested. The body volume of the inner packaging shall not be lower than the maximum capacity of the equipment. 5.1.2 The inner packaging of large packages shall be filled with liquids and the body volume of the container shall not be lower than the maximum capacity of the equipment. It is necessary to test the liquids or objects in the container separately. 5.1.3 For substances or articles in the inner packaging that are not to be packed, other substances may be placed instead of articles, which will make the test cumulatively invalid.
5.1.4 When using other required articles, it is recommended that the inner packaging or articles have similar qualities to the new inner packaging or articles. It is allowed to use additives such as lead to achieve the required total mass of the package and invalidate the test results. 8/0 21802---2008
5.1、5 red package should be made of clothing in the environment of 21 degrees: there are tight, can choose the best environment, the best environment is 2 degrees 0 years, the god business clock volume: 2 C and relative humidity 65 yuan 2 source 272 and humidity 65% ​​± 2 method: the maximum period of individual bacteria hospital can be new, twist new I final value can be within the natural wind. The installation should be dead acid.
5.2 Bin group
Dangerous goods day installation Yan Department of condensation teaching sample number is 3. 5,3 Bin test step
5,3,1 You should get the maximum load of 1. The maximum allowable total spray volume is about 5.3, the maximum package is lifted by the car and taught under the network drink, the fork is the depth of the entry into the pipe fork length adjustment (except for the change of the length of the bucket into the person you want to enter the person's side)
5.3.3 From each front can enter the person's sound volume test. 6 Sincerely report
…Test sample name
Quantity size specification
Manufacturer name:
Treatment of the solution to the neck
Test design;
Bottom lifting test question
…Test limit record. How can the reform help to solve the phenomenon of test fraud observed in the latest test: the new test method is introduced in this book, "… the test is performed, the tester signs, the test unit seals the design
G8/T21602-~2008
Dangerous goods
Large packaging test method
3/T2602
China Standards Publishing House
Nanhui Publishing House
Beijing Xingmen Non-Provincial Publishing House
Tel: 88023945
B185128-43
China Standards Publishing House in the commercial printing to the training
F2 80x 1220 1E
Printed by Zhang Xuehui 6 in Xue
2008 6th purchase
08 August banned edition
:35505e381 Price 10.00
National Publishing House Issued Annual Heart Course Exchange
Such as Yu Fresh Packing American Cans
Service Rights Exclusive Scenery Rights Must be Investigated
Raise Line Phone: (010168533533
8002-20912 1/uk
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.