HG/T 2129.15-1991 Acid-resistant phenolic plastics for chemical equipment parts flanged 90° elbow
time:
2024-08-13 11:17:41
- HG/T 2129.15-1991
- in force
Standard ID:
HG/T 2129.15-1991
Standard Name:
Acid-resistant phenolic plastics for chemical equipment parts flanged 90° elbow
Chinese Name:
耐酸酚醛塑料制化工设备零部件 凸缘式90 °虾米弯头
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1991-08-19 -
Date of Implementation:
1992-01-01
Standard ICS number:
Chemical Technology>>Chemical Equipment>>71.120.99 Other Chemical EquipmentChina Standard Classification Number:
Chemical Industry>>Chemical Machinery and Equipment>>G91 Chemical Machinery and Equipment Parts
alternative situation:
Replaced by HG/T 2129-2009
Skip to download
Summary:
HG/T 2129.15-1991 Acid-resistant phenolic plastics for chemical equipment parts Flange type 90° shrimp elbow HG/T2129.15-1991 Standard download decompression password: www.bzxz.net
Some standard content:
Scope of application
Chemical Industry Standard of the People's Republic of China
Flanged 90° shrimp elbows made of acid-resistant phenolic plastic for chemical equipment parts
HG/T2129.15-—91
This standard applies to flanged 90° shrimp elbows made of acid-resistant phenolic plastic with an allowable temperature of -30℃~130℃ and an allowable pressure as specified in the table below:
2 Reference standards
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastic 3 Types and basic dimensions
Types and basic dimensions are as specified in the figure and table below. Part A is larger
Note: r>3mm at the corner where it is not specified
Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991 and implemented on January 1, 1992
Nominal diameter
HG/T2129.15--91
Quality inspection,
Packaging, storage and transportation of raw materials and products
The quality inspection,
Packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2128. Marking example
Allowable pressure at room temperature
MPa(kgf/cm2)Www.bzxZ.net
0. 15 (1.5)
0.13 (1.3)
The marking symbol for the flanged 90° shrimp elbow made of acid-resistant phenolic plastic with a nominal diameter of DN=150mm is: DN150HG/T2129.15—91
Additional instructions:
This standard was proposed by China National Chemical Equipment Corporation and is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute. The main drafters of this standard are He Jiabing and He Jin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Chemical Industry Standard of the People's Republic of China
Flanged 90° shrimp elbows made of acid-resistant phenolic plastic for chemical equipment parts
HG/T2129.15-—91
This standard applies to flanged 90° shrimp elbows made of acid-resistant phenolic plastic with an allowable temperature of -30℃~130℃ and an allowable pressure as specified in the table below:
2 Reference standards
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastic 3 Types and basic dimensions
Types and basic dimensions are as specified in the figure and table below. Part A is larger
Note: r>3mm at the corner where it is not specified
Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991 and implemented on January 1, 1992
Nominal diameter
HG/T2129.15--91
Quality inspection,
Packaging, storage and transportation of raw materials and products
The quality inspection,
Packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2128. Marking example
Allowable pressure at room temperature
MPa(kgf/cm2)Www.bzxZ.net
0. 15 (1.5)
0.13 (1.3)
The marking symbol for the flanged 90° shrimp elbow made of acid-resistant phenolic plastic with a nominal diameter of DN=150mm is: DN150HG/T2129.15—91
Additional instructions:
This standard was proposed by China National Chemical Equipment Corporation and is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute. The main drafters of this standard are He Jiabing and He Jin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 1.7-1988 Directives for the work of standardization--Rules for drafting product package standards
- GB 19197-2003 Specification for the construction of karting tracks
- JB/T 7540-1994 Guidelines for quality management of complete sets of electromechanical equipment
- JB/T 50161-1999 Energy consumption classification of generator gas station
- SJ 20719-1998 X-ray fluorescence determination method for X value of mercury cadmium telluride crystals
- JB/T 4385.2-1999 Complexity classification and conversion coefficient of hammer free forgings
- GB/T 39551.4-2020 Patent navigation guide—Part 4:Business operation
- GB/T 11591-1999 Packet Assembly and Disassembly (PAD) facilities in public data networks
- LS/T 6108-2014 Inspection of grain and oils—Rapid test of aflatoxin B1 in cereal—Immunochromatography method
- HG/T 3065-1999 Determination of heating loss of precipitated hydrated silicon dioxide in rubber compounding ingredients
- GB/T 11354-1989 Determination of nitriding layer depth and metallographic structure inspection of steel parts
- JB/T 7123-1993 Technical requirements for YCT series electromagnetic speed regulating motors (frame sizes 112 to 355)
- GB/T 3396-2002 Determination of trace amounts of oxidants in industrial ethylene and propylene - Electrochemical method
- GB/T 19588-2004 Nano nickel powder
- JB/T 6887-1993 Technical requirements for iron castings for fans
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com