HG 2313-1992 Pesticide synergist/synergistic phosphorus emulsifiable concentrate
time:
2024-08-13 10:17:38
- HG 2313-1992
- in force
Standard ID:
HG 2313-1992
Standard Name:
Pesticide synergist/synergistic phosphorus emulsifiable concentrate
Chinese Name:
农药增效剂/增效磷乳油
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1992-06-01 -
Date of Implementation:
1993-01-01
Standard ICS number:
Agriculture>>65.100 Pesticides and other agricultural chemical productsChina Standard Classification Number:
Chemicals>>Fertilizers, Pesticides>>G25 Pesticides
Skip to download
Summary:
HG 2313-1992 Pesticide synergist/synergistic phosphorus emulsifiable concentrate HG2313-1992 Standard download decompression password: www.bzxz.net
Some standard content:
Chemical Industry Standard of the People's Republic of China
Pesticide synergist
Synergized phosphorus emulsifiable concentrate
Subject content and scope of application
HG 2313 ~ 92
This standard specifies the technical conditions, test methods, inspection rules, and marking, packaging, transportation and storage requirements of synergized phosphorus emulsifiable concentrate. This standard applies to synergized phosphorus emulsifiable concentrate prepared from synergized phosphorus industrial products and suitable emulsifiers and solvents. This product is used as a pesticide synergist.
Numerical ingredients: synergized phosphorus
Chemical name: 0.0-diethyl-0-decylthiocyanate phosphoric acid. Molecular formula: CuHO.SP
Conclusion:
Relative molecular mass 246.27 (according to the 1989 International Standard for Atomic Mass). 2 Reference standards
Preparation of standard solution for titration analysis (volumetric analysis) of chemical reagents GB601
GB 1600
Method for determination of moisture content in pesticides
Method for determination of stability of pesticide emulsions
GB 1603
GB1604
GB 1605
GB3796bZxz.net
3 Technical requirements
Pesticide acceptance planning
Sampling method for commercial pesticides
Pesticide packaging guide
3.1 Appearance: Pale yellow to light brown oily liquid, without visible suspended matter and sediment. 3.2 Synergistic phosphorus emulsifiable concentrate shall also meet the following index requirements: Item
0,0-diethyl-0-phenyl thiophosphate, % (m/m) acidity (in zSO. needle), % (m/m)
moisture, %
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Pesticide synergist
Synergized phosphorus emulsifiable concentrate
Subject content and scope of application
HG 2313 ~ 92
This standard specifies the technical conditions, test methods, inspection rules, and marking, packaging, transportation and storage requirements of synergized phosphorus emulsifiable concentrate. This standard applies to synergized phosphorus emulsifiable concentrate prepared from synergized phosphorus industrial products and suitable emulsifiers and solvents. This product is used as a pesticide synergist.
Numerical ingredients: synergized phosphorus
Chemical name: 0.0-diethyl-0-decylthiocyanate phosphoric acid. Molecular formula: CuHO.SP
Conclusion:
Relative molecular mass 246.27 (according to the 1989 International Standard for Atomic Mass). 2 Reference standards
Preparation of standard solution for titration analysis (volumetric analysis) of chemical reagents GB601
GB 1600
Method for determination of moisture content in pesticides
Method for determination of stability of pesticide emulsions
GB 1603
GB1604
GB 1605
GB3796bZxz.net
3 Technical requirements
Pesticide acceptance planning
Sampling method for commercial pesticides
Pesticide packaging guide
3.1 Appearance: Pale yellow to light brown oily liquid, without visible suspended matter and sediment. 3.2 Synergistic phosphorus emulsifiable concentrate shall also meet the following index requirements: Item
0,0-diethyl-0-phenyl thiophosphate, % (m/m) acidity (in zSO. needle), % (m/m)
moisture, %
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 9851.6-2008 Terminology of graphic technology - Part 6: Terms for permeographic printing
- QB/T 3523-1999 White cardboard
- GB 18165-2000 General technical requirements for small train type amusement rides
- JB/T 5960-1991 Technical requirements for crawler wetland bulldozers
- GB/T 4450-1995 Marine blind steel flange
- QB/T 1586.2-1992 Luggage hardware accessories box wheels
- SY/T 5587.5-1993 Conventional well repair operations for oil and water wells - Sand exploration and sand flushing procedures for oil and water wells
- GB/T 15942-1995 Technical requirements and test methods for mobile station access to 900MHz public mobile communication system
- JB/T 7056-1993 General technical requirements for pneumatic pipe fittings
- JB/T 9630.1-1999 Magnetic particle inspection and quality grading method for steam turbine steel castings
- JB/T 6987-1993 Manufacturing Resource Planning MRPⅡ System Prototype Method Software Development Specification
- YB/T 5078-2001 Gas chromatography method for determination of naphthalene content in coal tar
- HG/T 3656-1999 Steel structure bridge paint
- HG/T 20639.2-1998 Typical conditions table for automatic control engineering design
- GB/T 39055-2020 Technical requirements of manufacturing and installation consulting service for mechanical parking system
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com