JB/T 3105.1-1999 Single-head straight tenon mortising machine parameters

JB/T 3105.1-1999 This standard is a revision of JB 3104-82 "Single-head straight tenon mortising machine parameters". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the parameters of single-head straight tenon mortising machines. This standard is applicable to single-head straight tenon mortising machines. This standard was first issued on May 12, 1982. JB/T 3105.1-1999 Single-head straight tenon mortising machine parameters JB/T3105.1-1999 standard download decompression password: www.bzxz.net

ICS79.120.10
Machinery Industry Standard of the People's Republic of China
JB/T3105.1-1999
Parameters of Single-head Straight Sample Cutting Machine
Published on May 14, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3105.1-1999
This standard is a revision of JB310482 "Parameters of Single-head Straight Sample Cutting Machine". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged.
This standard replaces JB3104-82 from the date of implementation. Appendix A of this standard is a prompt appendix.
This standard was proposed by the National Technical Committee for Standardization of Woodworking Machine Tools and Cutting Tools. This standard is under the jurisdiction of Fuzhou Woodworking Machine Tool Research Institute. The responsible drafting unit of this standard: Mudanjiang Woodworking Machinery Factory. The main drafters of this standard: Dong Yanwen, Luan Jingkun This standard was first issued on May 12, 1982. 1www.bzxz.net
Machinery Industry Standard of the People's Republic of China
Single-head straight vertebra opening machine
This standard specifies the parameters of single-head straight sample opening machine. This standard is applicable to single-head straight sample opening machine. Parameters
JB/T3105.1-1999
Replace JB310482
The form of the single-head straight sample opening machine is shown in Figure 1 (without limiting the specific structure), and the parameters should comply with the provisions of Table 1. o
Figure 1 Simple diagram of the single-head straight sample cutting machine
Table 1 Main parameters of the single-head straight sample cutting machine
Main parameter name
Maximum length of the processing sample head
Approved by the State Machinery Industry Bureau on 1999-05-14 100
Implementation on 2000-01-01
JB/T3105.1-1999
Appendix A
(Suggestive appendix)
Other basic parameters of the single-head straight sample cutting machine Other basic parameters of the single-head straight sample cutting machine are shown in Table Al. Table A1
Parameter name
Maximum length of processing sample head
Minimum thickness of head
Maximum size of processing material
Mechanical industry standard
Parameters of single-head straight sample cutting machine
JB/T3105.1-1999
Published and issued by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/2 Number of words 6000
Format 880×1230
First printing in August 1999
First edition in August 1999
Print number 1-500
Price 500 yuan
99-354
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.