QB 1771-1993 Ethyl propionate

QB 1771-1993 Ethyl Propionate QB1771-1993 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB1769~-1801-93
Standard for Fragrance
(Product Standard)
Published on April 29, 1993
Implemented on December 1, 1993
Published by the Ministry of Light Industry of the People's Republic of China
1 Main contents and applicable ranges,
UKAONIKAca
Industry Standard of the People's Republic of China
QB177183
Ethyl Propionate
Technical requirements, test methods and inspection rules for non-filterable acid. This standard applies to ethyl propionate prepared by acetylating propyl alcohol and ethyl alcohol. 2 Reference Standard
F/T14451.3 Color determination of spices
GB/T11454.2 Determination of aroma of spices
CB/T14454.4 Determination of the light index of stock GB1154# Determination of the relative density of isolated and synthetic spices CB/T14457.1 Determination of the amount of monoisocyanates or trace amounts of synthetic spices GB/T14457.5 Determination of the amount of esters in isolated and synthetic spices GB/T14467.2 Determination of isolated and synthetic spices B153 General method for gas chromatography analysis of isolated and synthetic spices in packed columns 3 Chemical name and molecular formula of the product: Chemical formula, molecular name, molecular formula C, H,
Alternative formula CH, CH, COOCH, CH
Molecular weight 102.13 (according to the international standard of measurement in 1987) 4 Technical requirements: 1. Color should not be too obvious, color should not exceed the standard. 4.2 Aroma, whether it is similar to banana smell. 4.3. Relative density (25/25℃)
0.886~0.889.
4.4 Refractive index (20℃)
18301320
4.5 Night value 1.0
4 .6 Process (9 yuan - 102) (%)
4.7 Total quantity () 97.0,
5 Test method
5.1 Color determination
See GB/T1445t. Www.bzxZ.net
Approved by the Ministry of Light Industry of the People's Republic of China on April 29, 1993-12-01 for implementation
5.2 Evaluation of negative gas
See CB/T 14454.2.
5.3 Determination of relative density, 25/25
MCR11546.
5.4 Determination of refractive index, 203
TGB/T1J454.4.
5.5 Determination of boiling range
See CB/T14457.2.
5.B Determination of acid value
GB/T14457.d
5.7 Determination of ester group
See GB/T14457.5.
Note: For the gas phase chromatin method, see the user manual.
6 Inspection rules
QB1771—93
.1 Each batch of finished products of ethyl propionic acid shall be inspected at the production inspection gate. The manufacturer shall ensure that all products leaving the factory meet the requirements of this standard. Each batch of products leaving the factory shall be accompanied by a quality certificate, which includes: manufacturer name, product name, trademark, factory date, batch number, inspection certificate, product quality compliance certificate and this standard number. 6.2 Acceptance shall be carried out according to the provisions of this standard. The quality of the received products shall be inspected to see if they meet the requirements of this standard. Each batch shall be inspected once, and different batches shall be inspected separately. 6.3 For each batch of packaging, two barrels (bottles) below 10 kg (kg) shall be drawn, and three barrels (bottles) above 10 kg (kg) shall be drawn. When taking samples from the packaging, the appearance inspection should be free of moisture and impurities, and then the sample should be fully mixed. Then use a glass sampler to absorb 50-1m1 of sample per barrel (bottle), mix them evenly, and put them into two clean glass bottles. The following information should be marked on the bottles: production, product name, batch number, number and date of receipt. They are used for inspection and are kept for inspection. 8.4 If any of the indicators do not meet the requirements of this standard, the manufacturer can review and re-test the samples together with the manufacturer. If the re-test results still show that the indicators are unqualified, the batch of products cannot be accepted. 6.5 When the supply and demand parties have differences in product quality, they can jointly resolve or arrange for the statutory inspection agency to conduct inspections.
B. Color, aroma, acid content are factory inspection indicators. Relative humidity, optical density index and range are type inspection indicators.
7 Labeling, packaging, transportation, storage
7.1 Ethyl acetate is packed in barrels or bottles: The packaging should indicate: product name, manufacturer name, trademark batch number, net weight, inspection and ex-factory date, standard terminal number and related packaging marks. If the ordering unit has special requirements, it can make a separate agreement with the manufacturer
7.2 During transportation, it should be kept away from exposure to rain and foreign air, and it is strictly forbidden to transport with acids, chlorine, etc. 7.3 The product should be stored in a dry, ventilated, and shaded warehouse to prevent pollution from foreign air and keep away from fire. 7,4 Under the condition of complying with the prescribed transportation conditions, intact packaging and no convex seal, the shelf life of the product is one year: 12-
A1 only
96 177193
Yinjing A
KAONrKAca
Determination of ethyl propionate content by gas chromatography internal normalization method (test equipment)
A1.T colorimeter, geochromator and micro-processor according to G 113[5].
Fill length 2~r more than 84 m
P20, ~% at
A7.3 Detector
Ionization detector,
A2 Operation case
Xeno protection program External temperature is 7~130, rate 2/m3 or value temperature
Inlet 110,
Detector 140℃,
A2.2 Speed
Carrier gas flow path, 2m1/min,
3 Determination of column efficiency
A.1 Chemical property test
The test shall be carried out according to the method specified in Article 1 of B11539, and it shall meet the requirements.
A3.2 Sample efficiency
The efficiency shall be determined according to the method specified in Article 8.2 of GH11.3. A4 determination method
internal normalization method CD11330 city 10.4 extension method to avoid. A5 five refolding and result expression
according to CB11559 ten second 11 provisions, should meet the requirements, 13
additional instructions:
this standard is proposed by the quality standard department of the Ministry of Light Industry: this standard is sponsored by the National Flavor Standardization Center! . This standard is certified by Shanghai Vertical Material Factory, the Ministry of Industry Flavor Industry Scientific Research Institute responsible for the approval. The main drafter of this standard: Luo Jianshi Beauty. A standard does not refer to the original light industry new standard: QF853--83 acid ethyl ester "change, 14
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.