JB/T 975-1977 Welded bulkhead right angle pipe joint
time:
2024-07-11 09:59:38
- JB/T 975-1977
- in force
Standard ID:
JB/T 975-1977
Standard Name:
Welded bulkhead right angle pipe joint
Chinese Name:
焊接式隔壁直角管接头
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-01-17 -
Date of Implementation:
1977-05-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 975-1967; replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 975-1977 Welded Bulkhead Right Angle Pipe Joint JB/T975-1977 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
The First Machinery Industry Department of the People's Republic of China standard welded bulkhead right angle pipe joint
JB975-77
Replaces JB975-67
This standard applies to bulkhead right angle pipe joints in oil-based pipeline systems, with a nominal pressure of 320kgf/cm2 and a working temperature of -25~80℃.
Marking example:
D,+8:
Dayingbidian
Tube outer diameter D. 28mm bulkhead right angle pipe joint: pipe joint 28JB975-77
The First Machinery Industry of the People's Republic of China issued the First Machinery Industry Ministry Standardization Research Institute proposed to implement on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute, etc. Drafted 339wwW.bzxz.Net
3B 975-77
1'6x08
1862660
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
JB975-77
Replaces JB975-67
This standard applies to bulkhead right angle pipe joints in oil-based pipeline systems, with a nominal pressure of 320kgf/cm2 and a working temperature of -25~80℃.
Marking example:
D,+8:
Dayingbidian
Tube outer diameter D. 28mm bulkhead right angle pipe joint: pipe joint 28JB975-77
The First Machinery Industry of the People's Republic of China issued the First Machinery Industry Ministry Standardization Research Institute proposed to implement on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute, etc. Drafted 339wwW.bzxz.Net
3B 975-77
1'6x08
1862660
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB 6407-1992 Safety technical specification for commissioning, operation and maintenance of electrostatic precipitators
- JB/T 8093-1999 High-pressure water jet equipment
- JB/T 10155-1999 Test method for grinding performance of coated abrasives, emery cloth and sandpaper
- JB/T 10364-2002 Hydraulic check valve
- JB/T 9005.8-1999 Casting pulley for crane E type
- JB/T 8593-1997 Panels, adjustment plates and mounting boxes for concealed installation of electrical accessories
- HG 3287-2000 Malathion TC
- JB/T 9025-1999 Single-side curved track side-dumping mine car
- GB 6095-1985 Safety belts
- JB/T 8116-1998 Flatbed die cutting machine
- GB/T 5095.12-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 12: Soldering test Part 6: Test 12f Resistance of seals to flux and cleaning agents in machine welding
- GB 50224-1995 Standard for inspection and assessment of building anti-corrosion engineering quality
- GB/T 38483-2020 Determination of antibacterial activity for microbial secondary metabolites—Inhibition zone method
- JB/T 7377-1994 Installation dimensions of integral single-rod cylinders with inner diameters of 32 to 250 mm
- SY 5886-1993 Evaluation method of slow acid performance of sandstone
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com