Dangerous goods - Test method for tear of intermediate bulk containers (IBCs)

This standard is formulated for the first time. This standard specifies the equipment, sample quantity, test steps and test report for the tear test of flexible intermediate bulk containers for dangerous goods. This standard is applicable to the tear test of flexible intermediate bulk containers for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21591-2008 Tear test method for intermediate bulk containers for dangerous goods GB/T21591-2008 Standard download decompression password: www.bzxz.net
This standard is formulated for the first time. This standard specifies the equipment, sample quantity, test steps and test report for the tear test of flexible intermediate bulk containers for dangerous goods. This standard is applicable to the tear test of flexible intermediate bulk containers for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations", and the degree of consistency is not equivalent. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Dangerous Chemicals Management Standardization (SAC/TC251). The
responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard: Yu Yanjun, Wang Libing, Xiong Zhongqiang, Xu Chuanlai, Wang Xiaobing, Zhao Lihua.
This standard is formulated for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest versions apply to this standard.
GB/T4122.1 Fundamentals of packaging terminology
GB19433.1 General safety regulations for inspection of dangerous goods packaging for air transport
GB19434.1 General safety regulations for inspection of intermediate bulk containers for dangerous goods

1CS13.300
National Standard of the People's Republic of China
GB/T21591—2008
Dangerous goods
2008-04-01 Issued
Dangerous goods--Test method for tear of intermediate bulk containers (IBCs)2008-09-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration
GB/T21591—2008
Model Regulations", the degree of consistency with which is non-equivalent. This standard corresponds to the United Nations Recommendations on the Transport of Dangerous Goods. The technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. This standard is proposed and managed by the National Technical Committee for the Administration of Dangerous Chemicals (SAC/TC251). The responsible drafting unit of this standard is Tianjin Institute of Inspection and Quarantine Science and Technology. The participating drafting units of this standard are Jiangnan University, Sinochem Chemical Standardization Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard are Yu Yanjun, Wang Libing, Xiong Zhongqiang, Gu Chuanlai, Wang Xiaobing, Zhao Lihua. This standard is formulated for the first time.
1 Scope
Test method for tearing test of intermediate bulk containers for dangerous goods GB/T 21591—2008
This standard specifies the equipment, number of samples, sample preparation, test procedures and test report for tearing test of flexible intermediate bulk containers for dangerous goods.
This standard applies to tearing test of flexible intermediate bulk containers for dangerous goods. 2 Normative references
The clauses in the following documents become the clauses of this standard through reference in this standard. For all the referenced documents with the noted date, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to the agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced documents, the latest edition shall apply to this standard. GB/T 4122.1 Fundamentals of packaging terminology
GB19433.1 Safety rules for inspection of packaging of dangerous goods for air transport GB19434.1 General rules for safety rules for inspection of intermediate bulk containers of dangerous goods 3 Terms and definitions
GB/T 4122.1 and GB19434.1 as well as the following terms and definitions apply to this standard. 3.1 Intermediate bulk containers (IBCs) are also called intermediate bulk containers. They refer to rigid or flexible removable containers outside the scope specified in GB 19433.1. These containers: a) have the following capacities:
not more than 3.0m3 for solids and liquids of Class I and III packaging; not more than 1.5m3 for solids of Class I packaging in flexible, rigid plastic, composite, fiberboard and wooden intermediate bulk containers; not more than 3.0m3 for solids of Class I packaging in metal intermediate bulk containers; b) are designed for mechanical loading and unloading;
c) can withstand the stresses generated during loading and unloading and transportation, which are determined by tests. 3.2
Flexible intermediate bulk containers Flexible intermediate bulk containers, also known as flexible intermediate bulk containers, refer to intermediate bulk containers that meet the definition of intermediate bulk containers in GB 19434.1, with a box body made of film, woven fiber, textile and other flexible materials and their combination, and may be equipped with an inner lining or inner coating as well as auxiliary equipment and loading and unloading devices when necessary. Flexible towel-type bulk containers have the following typesa) 13H1 woven plastic without coating or liningb) 13H2
woven plastic with coating
c) 13H3
woven plastic with lining
woven plastic with coating and lining
plastic film
f) 13L1
textile without coating or lining
textile with coating
textile with lining
textile with coating and lining
GB/T 21591—2008
j) 13M1 multi-layer paper
k) 13M2 waterproof, multi-layer paper
the container itself, including the opening and its sealing device, but excluding auxiliary equipment. Applicable to all types of intermediate bulk containers except composite intermediate bulk containers.
Handling device handling device
Various lifting rings, loops, hooks and frames fixed to the body of the intermediate bulk container or extended from the body material. Applicable to flexible intermediate bulk containers. www.bzxz.net
maximum permissible gross mass
The mass of the shell and its auxiliary equipment and structural devices plus the maximum permissible loading mass (applicable to all types of intermediate bulk containers except flexible bulk bags).
4 Test equipment
One sample car;
One length measuring instrument (accurate to millimeters). 5 Test procedure
5.1 Test preparation
The intermediate bulk container shall be loaded to not less than 95% of its capacity and loaded to the maximum permissible load. The load shall be evenly distributed. 5.2 Number of specimens
The number of test specimens shall be 3.
5.3 Test procedures
5.3.1 Place the intermediate bulk container on the ground and make a 100 mm full penetration cut on the wide wall at an angle of 45° to the main axis, midway between the bottom and top planes of the contents. 5.3.2 Apply a load evenly to the intermediate bulk container at twice its maximum allowable load. The applied load shall be maintained for at least 5 min.
5.3.3 Intermediate bulk containers designed for top lifting or side lifting shall be lifted off the ground and maintained in this position for at least 5 min after the applied load is removed. Other equivalent methods may also be used. 6 Test report
Name, quantity, size and specification of the test sample;
Name of the manufacturer;
Test temperature and relative humidity;
Test equipment:
Record of the test results and any phenomena observed during the test that are helpful in explaining the test results; Explanation of the differences between the test method used and this standard;
GB/T 21591-2008
National Standard of the People's Republic of China
Method for tearing test of intermediate bulk containers
Dangerous goods
GB/T 215912008
Published by China Standards Press
No.16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal Code: 100045
Website: spc.nct.cn
Tel: 6852394668517548
Published by China Standards Press Printed by Qinhuangdao Printing Factory Distributed by Xinhua Bookstores in various regions
Format 880×12301/16
Word count 5,000 words
6 printing sheets 0.5
June 2008, the first edition, June 2008, the first printing*
Book number: 155066·1-31842 Price: 10.00 yuan If there is any printing error, the publishing center of our company will replace it. Copyright infringement will be investigated
Report phone: (010) 68533533
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.