SL 285-2003 Specification for design of water inlets for water conservancy and hydropower projects
time:
2024-08-08 07:42:06
- SL 285-2003
- in force
Standard ID:
SL 285-2003
Standard Name:
Specification for design of water inlets for water conservancy and hydropower projects
Chinese Name:
水利水电工程进水口设计规范
Standard category:
Water Conservancy Industry Standard (SL)
-
Date of Release:
2003-05-20 -
Date of Implementation:
2003-08-01
China Standard Classification Number:
Engineering Construction>>Water Conservancy and Hydropower Engineering>>P59 Hydropower Engineering
alternative situation:
Replaces SD 303-1988
publishing house:
China Water Resources and Hydropower PressPublication date:
2003-08-01
Drafter:
Fu Zhiyuan, Liu Zhiming, Xie Hongbing, Chen Daihua, Huang QizhiDrafting Organization:
Yangtze River Survey, Planning and Design Institute, Yangtze River Conservancy Commission, Ministry of Water ResourcesPublishing Department:
Ministry of Water Resources of the People's Republic of ChinaCompetent Authority:
Ministry of Water Resources
Description (Translated English) / downloadSkip to download
Summary:
This specification is applicable to the design of various types of water inlets at all design stages of water conservancy and hydropower projects. For the water inlets of small water conservancy and hydropower projects and temporary projects, the design can be appropriately simplified. It is not applicable to the water inlets of flood discharge tunnels with energy dissipation in the shaft. SL 285-2003 Water Conservancy and Hydropower Project Water Inlet Design Specification SL285-2003 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 8115.2-2000 Paper cutter blade
- JB/T 4705-2000 Spiral Wound Gasket
- JB/T 6303-1992 Technical parameters and requirements for calcium carbide furnace transformers
- JB/T 10401.2-2004 Off-grid wind turbine brake system Part 2: Test methods
- JB/T 6048-1992 Salt bath heat treatment
- GB/T 5070.11-2002 Chemical analysis methods for magnesia-chromium refractories Part 11: Determination of manganese oxide content by flame atomic absorption spectrometry
- GB/T 5630.1-1985 Flared right angle pipe joints
- GB/T 39090-2020 Adiabatic storage test method for dangerous goods
- GB/T 3390.5-2004 Inspection rules, packaging and marking of manual socket wrenches
- SY/T 5532-2002 Drawworks for oil drilling rigs
- JB/T 6665.1-1993 Light and small diesel engines - Pump direct-connected units types and basic parameters
- SJ 20053-1992 General specification of mechanical and physical design and manufacturing for military electronic equipments
- JGJ 58-1988 Cinema Building Design Specifications JGJ58-88
- GB/T 19568-2004 Specification for assembly and installation of wind turbine generator sets
- JB/T 3411.9-1999 45° round inner hole turning tool bar dimensions
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com