GB/T 2884.12-1996 Yangtze River system segmented barge type standard series--400 ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River

This standard specifies the general requirements, model composition and markings for the 400-ton segmented barges on the Yangtze River. This standard applies to segmented barges that navigate the Class IV waterways of the Yangtze River and its connecting trunk and branch routes. GB/T 2884.12-1996 Yangtze River System Segmented Barge Model Scale Series - Segmented Barge Model Scale for 400-ton Segmented Barges on the Yangtze River and its Connecting Trunk and Branch Routes GB/T2884.12-1996 Standard Download Decompression Password: www.bzxz.net

GB/T 2884.12--1996
This standard adds a new 400-ton class according to the requirements of relevant departments. The division of waterways in this standard is consistent with the requirements of GB139-90 Inland Waterway Standard.
This standard is proposed by the Ministry of Communications of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Inland Waterway Standardization. The drafting units of this standard are: the Institute of Standards and Metrology of the Ministry of Communications and the Yangtze River Ship Design Institute. The drafters of this standard are: Liu Huiru, Xiang Zhizhong, and Wang Feifei. This standard was first issued on December 31, 1981. The Yangtze River Ship Design Institute is responsible for the interpretation of this standard. 18
National Standard of the People's Republic of China
Dimension series of integrated barges for the changjiang waterwaysDimensions of integrated barges for the direct transport inmaln-hranch routes of the middle-downstream of the Changjiang and waterway network-400DwTScope
GB/T 2884.12—1996
This standard specifies the general requirements, model composition and markings for the 400-ton segmented barges of the Yangtze River. This standard applies to segmented barges that navigate in the ten direct routes of the middle-downstream of the Changjiang and waterway network-400DwT. 2 Definitions
This standard adopts the following definitions.
Waterway networkwaterway network
Inland navigable waterways including the Yangtze River, Pearl River, Qiantang River, Huaihe River, Yellow River, Haihe River and other water systems (including the Beijing-Hangzhou Canal) connected by the Beijing-Hangzhou, Xiang-Guangxi, Gan-Yue, Zheng-Huai and other canals.
3—General requirements
3.1 Ship type tonnage, 400L
3.2 Ship type main dimensions: total length 41m, beam 10.cm, draft 1.3~1.6m4 model composition||tt ||The model consists of four parts:
Indicates the barge tonnage
The first letter of the Chinese pinyin of "Gu" means "barge by section"The first letter of the Chinese pinyin of "Net" means "water network"The first letter of the Chinese pinyin of "Chang" means "Yangtze River"Approved by the State Administration of Technical Supervision on June 17, 1996 and implemented on January 1, 1997
W.bzsoso:com5 mark
GB/T 2884.12-1996
5.1 Each barge is equipped with a signboard with the following information: a) Ship model, factory serial number, standard number; b) Overall length, waterline length, molded width, molded depth, designed draft, full load displacement; c) Manufacturer's name:
d) Year and month of construction. bZxz.net
5.2 The signboard is rectangular in shape, 330mm long and 200mm wide, and is made of metal material (copper, aluminum or other). 352
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.