
Technical data of Type DB-423 electronic glass
time:
2024-07-14 14:56:23
- SJ/T 10588.7-1994
- Abolished
Standard ID:
SJ/T 10588.7-1994
Standard Name:
Technical data of Type DB-423 electronic glass
Chinese Name:
DB-423型电子玻璃技术数据
Standard category:
Electronic Industry Standard (SJ)
-
Date of Release:
1994-08-08 -
Date of Implementation:
1994-12-01 -
Date of Expiration:
2008-01-20
China Standard Classification Number:
General>>Standardization Management and General Provisions>>A01 Technical Management
alternative situation:
Replaced by SJ/T 11369-2007

Skip to download
Summary:
SJ/T 10588.7-1994 Technical data of DB-423 electronic glass SJ/T10588.7-1994 Standard download decompression password: www.bzxz.net

Some standard content:
Electronic Industry Standard of the People's Republic of China
Technical data of type DB-423 electronic glass
Technical data of type DB-423 electronic glassSubject content and scope of application
This standard specifies the chemical composition and physical and chemical performance indicators of DB-423 electronic glass. This standard applies to glass materials used for color picture tube screens. Reference standards
GB9000
Standard method for chemical analysis of electronic glass
Method for testing chromaticity coordinates of screen glass for color picture tubesAnalysis of cerium oxide in color picture tube glassGB/T14012
General specification for glass shell of black and white picture tubes
3 Technical requirements
Chemical composition is shown in Table 1.
Chemical composition
Weight percentage
60.55±1.00
0.24±0.03
8.10±0.15
6.95±0.15
2.50±0.10bzxz.net
8.40±0.15
7.96±0.15
1.80±0.10
0.31±0.10
2.05±0.10
Approved by the Ministry of Electronics Industry of the People's Republic of China on August 8, 1994 SJ/T105 88.7-—94
Test method
GB9000.10
GB9000.15
GB9000.11
GB9000.12
1994-12-01 implementation
SJ/T10588.7-94
Continued Table 1
Weight percentage
0.27±0.03
0.04±0.01
0.40±0.05
Note: Fe:O, as impurity control, is not included in the percentage composition. 2 Physical and chemical performance indicators are shown in Table 2.
Indicator name
Average linear thermal expansion coefficient a in the range of 0~300℃Density
Softening point
Annealing point
Strain point
X-ray absorption coefficient (0.06nm, 20.6KeV)Chromaticity coordinates (center value)
Additional instructions:
This standard is under the jurisdiction of the Standardization Institute of the Ministry of Electronics Industry. Unit
Test method
GB9000.14
(98.7+1.0)×10-7
2.783±0.05
698±3
516±5
476±5
This standard was drafted by Shenzhen Zhongkang Glass Co., Ltd. and the Standardization Institute of the Ministry of Electronics Industry. The main drafters of this standard are Wang Yan, Lin Chunguang and Liu Chengjun. 2
Test method
GB/T14012
Article 4.5.4
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Technical data of type DB-423 electronic glass
Technical data of type DB-423 electronic glassSubject content and scope of application
This standard specifies the chemical composition and physical and chemical performance indicators of DB-423 electronic glass. This standard applies to glass materials used for color picture tube screens. Reference standards
GB9000
Standard method for chemical analysis of electronic glass
Method for testing chromaticity coordinates of screen glass for color picture tubesAnalysis of cerium oxide in color picture tube glassGB/T14012
General specification for glass shell of black and white picture tubes
3 Technical requirements
Chemical composition is shown in Table 1.
Chemical composition
Weight percentage
60.55±1.00
0.24±0.03
8.10±0.15
6.95±0.15
2.50±0.10bzxz.net
8.40±0.15
7.96±0.15
1.80±0.10
0.31±0.10
2.05±0.10
Approved by the Ministry of Electronics Industry of the People's Republic of China on August 8, 1994 SJ/T105 88.7-—94
Test method
GB9000.10
GB9000.15
GB9000.11
GB9000.12
1994-12-01 implementation
SJ/T10588.7-94
Continued Table 1
Weight percentage
0.27±0.03
0.04±0.01
0.40±0.05
Note: Fe:O, as impurity control, is not included in the percentage composition. 2 Physical and chemical performance indicators are shown in Table 2.
Indicator name
Average linear thermal expansion coefficient a in the range of 0~300℃Density
Softening point
Annealing point
Strain point
X-ray absorption coefficient (0.06nm, 20.6KeV)Chromaticity coordinates (center value)
Additional instructions:
This standard is under the jurisdiction of the Standardization Institute of the Ministry of Electronics Industry. Unit
Test method
GB9000.14
(98.7+1.0)×10-7
2.783±0.05
698±3
516±5
476±5
This standard was drafted by Shenzhen Zhongkang Glass Co., Ltd. and the Standardization Institute of the Ministry of Electronics Industry. The main drafters of this standard are Wang Yan, Lin Chunguang and Liu Chengjun. 2
Test method
GB/T14012
Article 4.5.4
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6436-1992 Metering pump adjustment table
- GB/T 24903-2010 Inspection of grain and oils—Determination of resveratrol in peanut by high performance liquid chromatography
- CB 739-68 Portable Battery Light
- GB 15558.2-1995 Buried polyethylene pipe fittings for gas
- GB/T 15057.11-1994 Determination of particle size of limestone for chemical industry
- JB/T 7370-1994 Flexible graphite braided packing
- GB/T 5095.6-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 6: Climate test and soldering test
- GB/T 3251-1982 Compression test method for aluminum and aluminum alloy pipes
- GB/T 4701.7-1985 Chemical analysis methods for ferrotitanium - Molybdenum blue spectrophotometric method for determination of phosphorus content
- GB/T 15072.9-1994 Chemical analysis methods for precious metals and their alloys - Determination of indium content in gold alloys
- SJ 20683-1998 General specification for digital beam controller module of phased array radar T/R assembly
- GB 17907-1999 General safety requirements for mechanical parking equipment
- JB/T 5168-1991 Test methods for forage seeders
- JB/T 6294-2004 Agricultural tractor type inspection rules
- SY 6457-2000 Safety regulations for sour natural gas pipelines
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]