JB/T 9162.8-1999 Column dimensions
time:
2024-08-11 18:26:42
- JB/T 9162.8-1999
- in force
Standard ID:
JB/T 9162.8-1999
Standard Name:
Column dimensions
Chinese Name:
表柱 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.8-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.8-1999 JB/T 9162.8-1999 Column dimensions JB/T9162.8-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Upright post
imngong
This standard specifies the types and sizes of the hanging
2 Types and sizes
Types and sizes shall be as specified in the following figures and tables. wwW.bzxz.Net
Marking example:
Marking for the limited difference
=[2,160m]
Table 12×160JB/T9162.8——1999
National Machinery Industry Corporation approved 2G on 1999-05-20
JB/T9162.8—1999
Chemical ZB J44GIR-ST
M12×1.25
Implementation on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Upright post
imngong
This standard specifies the types and sizes of the hanging
2 Types and sizes
Types and sizes shall be as specified in the following figures and tables. wwW.bzxz.Net
Marking example:
Marking for the limited difference
=[2,160m]
Table 12×160JB/T9162.8——1999
National Machinery Industry Corporation approved 2G on 1999-05-20
JB/T9162.8—1999
Chemical ZB J44GIR-ST
M12×1.25
Implementation on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SJ 1.1-1987 Major procedures and requirements for working out of annual plans relating to technical standards in electronic industry
- NY/T 702-2003 Hop
- JB/T 3688.3-1998 Test methods for wheel loaders
- GB/T 14556-1993 Interface requirements for marine navigation radar
- HG/T 3640-1999 Film dimensions for electronic scanners
- CB 597-1990 Externally threaded steel right angle stop check valve
- HG/T 3015-1999 Specification for anhydrous sodium carbonate and sodium carbonate monohydrate for photographic processing chemicals
- JB/T 10126.2-1999 Transition plates for four-jaw chucks for machine tool fixture parts and components
- JG/T 115-1999 Color coated steel door and window profiles
- SJ 1620-1980 Pulse modulator tubes,Type TM-90(J)
- SY/T 5587.4-1993 Procedure for leak detection of casing packers in conventional well repair operations for oil and water wells
- QB/T 2715-2005 Physical and mechanical tests on leather - Determination of apparent density
- GB/T 22234-2008 Labelling of chemicals based on GHS
- JJF 1066-2000 Calibration Specification for Length Measuring Machine
- JB/T 2001.2-1999 Types and dimensions of plunger glands for water systems (PN=20MPa)
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com