JB/T 9163.1-1999 Gear Hobbing Fixture Dimensions

JB/T 9163.1-1999 JB/T 9163.1-1999 Gear Hobbing Fixture Dimensions JB/T9163.1-1999 Standard download decompression password: www.bzxz.net

ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
JB/T9163.1~9163.20--1999wwW.bzxz.Net
Fixtures and attachments for gear cutting machine
Fixtures and attachments for gear cutting machine1999-05-20 Issued
State Administration of Machinery Industry
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of China
Fixtures fnrgearhnhbingmachine...Dimensions
JB/T 9163.1-1999
2B J52 002 87
This standard specifies the types and sizes of gears with thick teeth. It is applicable to gears with a positioning diameter of 12-30m. The types and sizes are as shown in the following figure and table:
National Machinery Industry Corporation 1999-05-20 Approved 2000-01-01 Implementation Basic size
Medical standard deviation hb
JB/T 9163.1-1999
Marking Example:
JB/T 9163.1-1999
=imm Gear marking:
Gear 12 × 60 FB/T 9163.1-19993
lHr9163.1-1999
Attachment A
Recommended shaft diameter dimensions with process allowances
This attachment lists the diameters of the two punch shafts. The diameters of the two punch shafts are reference values ​​and are used for the additional workpiece positioning between processes. 21.80
Process allowance shaft diameter limit deviation hGi
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.