JB/T 8023.2-1999 Star handles for machine tool fixture parts and components
time:
1999-08-06 15:00:00
- JB/T 8023.2-1999
- in force
Standard ID:
JB/T 8023.2-1999
Standard Name:
Star handles for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 星形把手
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8023.2-1995 (original standard number GB/T 2219-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8023.2-1999 JB/T 8023.2-1999 Star handles for machine tool fixture parts and components JB/T8023.2-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Mechanical Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01
1 Scope
Mechanical Industry Standard of the People's Republic of China
Parts and units of jigs and fixtures
Star grip knob
The parts and units of jigs and fixturesStar grip knob
This standard specifies the star grips with specifications of 6~16mm. 2 Reference standards
JB/T 8023.21999
Replaces JB/T8023.2——1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. Carbon steel castings for general engineering
GB/T 11352—1989
JB/T 8044—1999
3 Dimensions
Technical requirements for machine tool fixture parts and components
The dimensions are shown in the following figure and table.
Others P
Approved by the State Bureau of Machinery Industry on August 6, 1999, and implemented on January 1, 2000
Basic dimensions
Limit deviation H9
4 Technical conditions
JB/T8023.2-1999
4.1Material: ZG45 in accordance with GB/T11352. 4.2Parts surface should be sandblasted.
4.3Other technical conditions in accordance with JB/T8044. 5 Marking
5.1 Marking example:
Type A star handle with d=10mm:
Handle A10JB/T8023.2—1999bzxZ.net
Type B star handle with d-M10:
Handle BM10JB/T8023.2—-1999
Basic size
Limit deviation H7
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Mechanical Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01
1 Scope
Mechanical Industry Standard of the People's Republic of China
Parts and units of jigs and fixtures
Star grip knob
The parts and units of jigs and fixturesStar grip knob
This standard specifies the star grips with specifications of 6~16mm. 2 Reference standards
JB/T 8023.21999
Replaces JB/T8023.2——1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. Carbon steel castings for general engineering
GB/T 11352—1989
JB/T 8044—1999
3 Dimensions
Technical requirements for machine tool fixture parts and components
The dimensions are shown in the following figure and table.
Others P
Approved by the State Bureau of Machinery Industry on August 6, 1999, and implemented on January 1, 2000
Basic dimensions
Limit deviation H9
4 Technical conditions
JB/T8023.2-1999
4.1Material: ZG45 in accordance with GB/T11352. 4.2Parts surface should be sandblasted.
4.3Other technical conditions in accordance with JB/T8044. 5 Marking
5.1 Marking example:
Type A star handle with d=10mm:
Handle A10JB/T8023.2—1999bzxZ.net
Type B star handle with d-M10:
Handle BM10JB/T8023.2—-1999
Basic size
Limit deviation H7
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6520-1992 Calculation method for thrust bearings of steam turbines
- GB 18061-2000 Hydrazine sanitary standard for source water
- JB/T 5146.1-1991 Types and basic parameters of humidifiers for air conditioning equipment
- HG/T 3657-1999 Water treatment agent isothiazolinone derivatives
- SY 6186-1996 Safety regulations for oil and gas pipelines
- GB/T 14488.1-2008 Oilseeds - Determination of oil content
- GB 5408.1-1999 Pasteurized milk
- JB/T 9615.1-2000 Test method for interturn insulation of loose-fitting windings of AC low-voltage motors
- HG 21537.3-1992 Normal pressure carbon steel stuffing box (PN＜0.1)
- GB/T 15155-1994 General technical requirements for piezoelectric ceramic materials for filters
- JB/T 7163-1993 Steel die forging for rock drilling machinery and pneumatic tools
- QB/T 2744.2-2005 Bath salts Part 2: Bath salts
- GB/T 5633.2-1985 Expanded adjustable end tee pipe fittings
- GB 3836.9-1990 Explosion-proof electrical equipment for explosive environments, cast-type electrical equipment "m"
- GB/T 8960-2001 Polyester drawn yarn
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]