JB/T 2462.22-1999 Parameters and dimensions of pneumatic drive heads for common components of modular machine tools

JB/T 2462.22-1999 This standard is a revision of JB 2518-78 "Parameters and interchangeable dimensions of pneumatic heads of common components of modular machine tools". Only editorial changes have been made according to relevant regulations, and the main technical content has not changed. This standard specifies the interchangeable dimensions of pneumatic heads of modular machine tools. This standard is applicable to pneumatic heads of modular machine tools and their automatic lines. This standard was first issued in 1978. JB/T 2462.22-1999 Parameters and dimensions of pneumatic heads of common components of modular machine tools JB/T2462.22-1999 Standard download decompression password: www.bzxz.net

1C25.6.99
Machinery Industry Standard of the People's Republic of China
JB/12462.1~2462.28-1999bzxZ.net
Common Components of Modular Machine Tools
1990-05-21 Issued
National Bureau of Machinery Industry
2(MI-01-1 Implementation
JB/T2462.22-[999
This standard is based on the technical proposal of R2518-78 "Common Components of Modular Machine Tools, Parameters and Interchange Dimensions of Pneumatic Power Heads". This standard was written on January 2518-78 and has been revised in detail according to relevant regulations. This standard replaces JB251S-7 from the date of implementation. This standard was proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is a copy of the National Technical Committee for Standardization of Metal Cutting Machine Tools for Modular Machine Tools Branch! Old. This standard is funded by the Dazhao Modular Machine Tool Research Institute. The standard was first issued in 1978.
Machinery Industry Standard of the People's Republic of China
Common Parts of Modular Machine Tools
Parameters and Dimensions of Pneumatic Power Heads
This standard specifies the number and size of pneumatic heads of modular machine tools and the pneumatic power heads of modular machine tools. This standard is applicable to modular machine tools and their automatic pneumatic power heads. 2 Reference Standards
JE/T2462.22—1900
Cost Fee I B2518-78
The following clauses are included in the text of this standard and are all valid when this standard is issued. All revisions to the standard should be made by the following parties: GB3511570-1094 Roundness
3 Dream number and interchangeable size
3.1 The integer of the small head of the wind or dynamic object is the clamping stand D, the actual specification is 40mm, 50mm, 63mm punching specification: 3 .2 Other parameters and dimensions of the pneumatic power head shall conform to Figure 1 and Table 1. GB/T1570-1990 2000-01-01 Implementation Diameter of main shaft Total extension F Curve Approach Hall Median ratio Shaft speed Specification Appendix Installation size: JB/T2462.22—1999 Homo2:k E M2T x1.5
Note: In the table, the force, + to, 1 standard back source pressure × 10 40
530180
Five M33 5
30u-250k
Store M12×1.s
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.