JB/T 8008.4-1999 Machine tool fixture parts and components rotating washers
time:
1999-08-06 15:00:00
- JB/T 8008.4-1999
- in force
Standard ID:
JB/T 8008.4-1999
Standard Name:
Machine tool fixture parts and components rotating washers
Chinese Name:
机床夹具零件及部件 转动垫圈
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8008.4-1995 (original standard number GB/T 2170-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8008.4-1999 JB/T 8008.4-1999 Machine tool fixture parts and components Rotating washers JB/T8008.4-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixturesTurning washer
This standard specifies turning washer with a nominal diameter of 5~36 mm. 2 Referenced standards
JB/T8008.4-1999
Replaces JB/T8008.4—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. Technical conditions for high-quality carbon structural steel
GB/T699—1988
Technical requirements for machine tool fixture parts and components
JB/T8044-—1999
3 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999 54
Implementation on January 1, 2000
Nominal diameter
(climbing diameter)
4 Technical conditions
4.1 Material: 45 steel in accordance with the provisions of GB/T699. 4.2 Heat treatment: 35~40HRC.
4.3 Other technical conditions in accordance with the provisions of JB/T8044. 5 Marking
5.1 Marking example:
JB/T8008.4-1999
Basic dimensions
Type A rotating pad with nominal diameter = 8mm, r-22mm: Washer A8×22JB/T8008.4—1999
Limit aberration H11Www.bzxZ.net
Basic dimensions
Limit deviation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixturesTurning washer
This standard specifies turning washer with a nominal diameter of 5~36 mm. 2 Referenced standards
JB/T8008.4-1999
Replaces JB/T8008.4—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. Technical conditions for high-quality carbon structural steel
GB/T699—1988
Technical requirements for machine tool fixture parts and components
JB/T8044-—1999
3 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999 54
Implementation on January 1, 2000
Nominal diameter
(climbing diameter)
4 Technical conditions
4.1 Material: 45 steel in accordance with the provisions of GB/T699. 4.2 Heat treatment: 35~40HRC.
4.3 Other technical conditions in accordance with the provisions of JB/T8044. 5 Marking
5.1 Marking example:
JB/T8008.4-1999
Basic dimensions
Type A rotating pad with nominal diameter = 8mm, r-22mm: Washer A8×22JB/T8008.4—1999
Limit aberration H11Www.bzxZ.net
Basic dimensions
Limit deviation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB11691-1989 Cast steel suction sea valve (four-position)
- JJG 376-2007 Verification Regulation of Electrolytic Conductivity Meters
- SY 5309-1987 General technical requirements for packaging of petroleum drilling machinery products
- GB 8941.2-1988 Paper and paperboard specular gloss determination method 45° angle determination method
- GB/T 15429-1995 Plastic-coated aluminum sheets for electronic equipment
- JB/T 1590-1996 Method for compiling product models of rock drilling machinery and pneumatic tools
- JB/T 7786-1995 Sampling method for inspection of power semiconductor devices
- GB/T 21597-2008 Dangerous goods - Leakproofness test method for portable tank
- HG/T 2563-1994 Emulsifier NP-10
- SY/T 0541-1994 Determination of the pour point of crude oil
- JB 20018-2004 Swing granulator
- HG/T 20544-1992 Technical requirements for the installation of chemical industrial furnace structures
- JB/T 51179-2000 Reliability assessment method, bench test method, fault classification and judgment rules for piston oil pump assembly
- GB 17440-1998 粮食加工、储运系统粉尘防爆安全规程
- GB/T 5753-1994 Determination of the thickness of the cover layer of steel cord conveyor belts
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com