
Chemical products for industry use - Determination of spontaneous combustion of solids and liquids
time:
2024-06-30 08:32:08
- GB/T 21850-2008
- in force
Standard ID:
GB/T 21850-2008
Standard Name:
Chemical products for industry use - Determination of spontaneous combustion of solids and liquids
Chinese Name:
化工产品 固体和液体自燃性的确定
Standard category:
National Standard (GB)
-
Date of Release:
2008-05-12 -
Date of Implementation:
2008-09-01
Standard ICS number:
Environmental protection, health care and safety >> 13.300 Dangerous goods protectionChina Standard Classification Number:
Comprehensive>>Marking, packaging, transportation, storage>>A80 Marking, packaging, transportation, storage Comprehensive
publishing house:
China Standards PressISBN:
155066·1-32500Publication date:
2008-07-01Plan number:
20070880-T-469
Release date:
2008-05-12Review date:
2023-12-28Drafter:
Zhou Feizhou, Zhan Chunrui, Li Jianjun, Kou Haijuan, Jiang Hongxing, Chen Xiaowei, Liu JunfengDrafting Organization:
Jiangsu Entry-Exit Inspection and Quarantine BureauFocal point Organization:
National Technical Committee on Hazardous Chemicals Management StandardizationProposing Organization:
National Technical Committee on Hazardous Chemicals Management Standardization (SAC/TC 251)Publishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China National Standardization AdministrationCompetent Authority:
National Standardization Administration

Skip to download
Summary:
This standard is published for the first time. This standard specifies the test method for the spontaneous combustion of chemical products. This standard is applicable to the determination of the spontaneous combustion of solid, liquid and powdered chemical products after short-term contact with air at room temperature. This standard is equivalent to NF20-040:1985 "Determination of the flammability of gases produced by the hydrolysis of solid and liquid industrial chemicals" (French version). GB/T 21850-2008 Determination of the spontaneous combustion of solid and liquid chemical products GB/T21850-2008 Standard download decompression password: www.bzxz.net
This standard is published for the first time. This standard specifies the test method for the spontaneous combustion of chemical products. This standard is applicable to the determination of the spontaneous combustion of solid, liquid and powdered chemical products after short-term contact with air at room temperature. This standard is equivalent to NF20-040:1985 "Determination of the flammability of gases produced by the hydrolysis of solid and liquid industrial chemicals" (French version).
This standard is equivalent to NFT20?039:1985 "Determination of spontaneous combustion of solid and liquid chemical products" (French version), and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Participating drafting unit of this standard: Jiangxi Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Zhou Feizhou, Zhan Chunrui, Li Jianjun, Kou Haijuan, Jiang Hongxing, Chen Xiaowei, Liu Junfeng.
This standard is published for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all referenced documents with a date, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties that reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB/T 21847 Determination of the flammability of industrial chemical product gases
This standard is published for the first time. This standard specifies the test method for the spontaneous combustion of chemical products. This standard is applicable to the determination of the spontaneous combustion of solid, liquid and powdered chemical products after short-term contact with air at room temperature. This standard is equivalent to NF20-040:1985 "Determination of the flammability of gases produced by the hydrolysis of solid and liquid industrial chemicals" (French version).
This standard is equivalent to NFT20?039:1985 "Determination of spontaneous combustion of solid and liquid chemical products" (French version), and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Participating drafting unit of this standard: Jiangxi Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Zhou Feizhou, Zhan Chunrui, Li Jianjun, Kou Haijuan, Jiang Hongxing, Chen Xiaowei, Liu Junfeng.
This standard is published for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all referenced documents with a date, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties that reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB/T 21847 Determination of the flammability of industrial chemical product gases

Some standard content:
[CS13.300
National Standard of the People's Republic of China
GB/T21850—2008
Chemical products
Determination of spontaneous combustion of solids and liquids
Chemical products for indnstry use-Determination of spontaneous combustion of solids and liquids2008-05-12Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Implementation on September 1, 2008
GB/T21850--2008
This standard is equivalent to NFT20-039:1985 Determination of spontaneous combustion of solids and liquids for chemical products" (French version), with editorial modifications made to the standard text format in accordance with GB/T1.1-2000. This standard was proposed by the National Technical Committee for Standardization of Hazardous Chemicals Management (SAC/TC251) and is incorporated into II. The responsible drafting unit of this standard is Tingsu Entry-Exit Inspection and Quarantine Bureau. The participating units of this standard are Jiangxi Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard are Zhou Feizhou, Zhan Chunrui, Li Jianjun, Kou Hai, Jiang Hongxing, Chen Xiaowei and Liu Junfeng. This standard is published for the first time.
1 Scope
Chemical products
Determination of spontaneous combustion of solids and liquids
This standard specifies the test method for spontaneous combustion of chemical products. GB/T 21850—2008
This standard is applicable to the determination of the spontaneous combustion of solid, liquid and powder chemical products after short-term contact with air at room temperature. 2
Terms and definitions
The following technical specifications and definitions apply to standards
senyustion
spontaneonbzxZ.net
produce fire
Under normal conditions
3 Principle
At room temperature, the
is in contact with air and
Reagents and materials
Silica or basic
Instruments and equipment
spontaneous substances.
Porcelain bottom with a diameter of about 100
|Working steps
6.1 Liquid sample: Check whether there is flame in the mouth (repeat
6.2 Powder solid sample
Result expression
Observe whether there is
, fill the silica bomb soil into the round bottom with a thickness of about
mm, and put 5 mL of the sample into the bottom III, and observe whether it changes from 1 in 5 min or 2 mL. m drop to a non-flammable surface and observe the sample during the drop (repeat 6 times).
The spontaneous combustion of the product is determined by the results obtained through at least 6 actual pulls. 8 Test report
The test report should include the following parts:
e) Confirmation of the sample (physical form, moisture, impurities, etc.): Basis of the test method;
Test results:
Details of special conditions that occurred during the test: Report of all operations that are not foreseen in the current standard or all operations that are arbitrary, GE/T 21850—2008
Fees Reference
Articles 82-905 of the Law amending Articles 77-771 of 21 October 1932 (see Official Journal L of 22 October 1982)
Parliament Directive 67/548E of 27 July 1967 (Official Journal L 196 of 16 August 1967, p. 1)
Parliament Directive 79/831 of 18 September 1979 (Official Journal of the European Union No. 1259 of 15 October 1979, p. 10)[4]
Council Directive 84/449 of 25 August 1984 (Official Journal of the European Union No. L 251 of 19 August 1984, p. 1)2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
GB/T21850—2008
Chemical products
Determination of spontaneous combustion of solids and liquids
Chemical products for indnstry use-Determination of spontaneous combustion of solids and liquids2008-05-12Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Implementation on September 1, 2008
GB/T21850--2008
This standard is equivalent to NFT20-039:1985 Determination of spontaneous combustion of solids and liquids for chemical products" (French version), with editorial modifications made to the standard text format in accordance with GB/T1.1-2000. This standard was proposed by the National Technical Committee for Standardization of Hazardous Chemicals Management (SAC/TC251) and is incorporated into II. The responsible drafting unit of this standard is Tingsu Entry-Exit Inspection and Quarantine Bureau. The participating units of this standard are Jiangxi Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard are Zhou Feizhou, Zhan Chunrui, Li Jianjun, Kou Hai, Jiang Hongxing, Chen Xiaowei and Liu Junfeng. This standard is published for the first time.
1 Scope
Chemical products
Determination of spontaneous combustion of solids and liquids
This standard specifies the test method for spontaneous combustion of chemical products. GB/T 21850—2008
This standard is applicable to the determination of the spontaneous combustion of solid, liquid and powder chemical products after short-term contact with air at room temperature. 2
Terms and definitions
The following technical specifications and definitions apply to standards
senyustion
spontaneonbzxZ.net
produce fire
Under normal conditions
3 Principle
At room temperature, the
is in contact with air and
Reagents and materials
Silica or basic
Instruments and equipment
spontaneous substances.
Porcelain bottom with a diameter of about 100
|Working steps
6.1 Liquid sample: Check whether there is flame in the mouth (repeat
6.2 Powder solid sample
Result expression
Observe whether there is
, fill the silica bomb soil into the round bottom with a thickness of about
mm, and put 5 mL of the sample into the bottom III, and observe whether it changes from 1 in 5 min or 2 mL. m drop to a non-flammable surface and observe the sample during the drop (repeat 6 times).
The spontaneous combustion of the product is determined by the results obtained through at least 6 actual pulls. 8 Test report
The test report should include the following parts:
e) Confirmation of the sample (physical form, moisture, impurities, etc.): Basis of the test method;
Test results:
Details of special conditions that occurred during the test: Report of all operations that are not foreseen in the current standard or all operations that are arbitrary, GE/T 21850—2008
Fees Reference
Articles 82-905 of the Law amending Articles 77-771 of 21 October 1932 (see Official Journal L of 22 October 1982)
Parliament Directive 67/548E of 27 July 1967 (Official Journal L 196 of 16 August 1967, p. 1)
Parliament Directive 79/831 of 18 September 1979 (Official Journal of the European Union No. 1259 of 15 October 1979, p. 10)[4]
Council Directive 84/449 of 25 August 1984 (Official Journal of the European Union No. L 251 of 19 August 1984, p. 1)2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6972-1993 Microhole exhaust silencer measurement method
- SB/T 10374-2004 Technical requirements for professional managers of catering industry
- JB/T 51179-2000 Reliability assessment method, bench test method, fault classification and judgment rules for piston oil pump assembly
- JB/T 6939.2-2004 Controllers for off-grid wind turbines Part 2: Test methods
- SJ 3160-1988 Sockets for colour picture tubes,Type GZS8-6-2
- SJ 20797-2001 General specification for shortwave reconnaissance and analysis receivers
- GB/T 11437-1989 Sectional specification for ferrite cores for broadcast receiver antennas (for certification purposes)
- GB/T 8754-1988 Aluminium and aluminium alloy anodic oxidation - Application of the breakdown potential test method to test insulation
- GB/T 15453-1995 Determination of chloride ions in industrial circulating cooling water - Silver nitrate titration method
- NY/T 589-2002 Ponkan
- JB/T 9160.9-1999 Dimensions of double knurled bracket for single-spindle turret automatic lathe auxiliary tool
- GB/T 15551-1995 Mulberry silk fabrics
- JB/T 5411-1991 Safety valve and compensation valve for diaphragm metering pump
- GB/T 17274-1998 Series 1:Specification and testing for non-pressurized containers for dry bulk
- GB/T 5170.2-1996 Basic parameter verification methods for environmental test equipment for electrical and electronic products Temperature test equipment
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com