
MT/T 964-2005 Classification of lead content in coal
time:
2024-08-07 14:37:39
- MT/T 964-2005
- in force
Standard ID:
MT/T 964-2005
Standard Name:
Classification of lead content in coal
Chinese Name:
煤中铅含量分级
Standard category:
Coal Industry Standard (MT)
-
Date of Release:
2005-09-23 -
Date of Implementation:
2006-02-01
Standard ICS number:
Mining and Mineral Products >> 73.040 CoalChina Standard Classification Number:
Mining>>Solid Fuel Mines>>D20 Solid Fuel Mines Comprehensive
Drafter:
Luo Yunfei.Drafting Organization:
Beijing Coal Chemical Research Institute, China Coal Research InstituteFocal point Organization:
National Coal Standardization Technical CommitteeProposing Organization:
China Coal Industry Association Science and Technology Development DepartmentPublishing Department:
National Development and Reform Commission

Skip to download
Summary:
This standard specifies the classification of coal according to the range of lead content on dry basis (Pba) and its nomenclature and code. This standard is applicable to the classification of lead content in coal during coal exploration, production, processing and utilization, and coal sales. MT/T 964-2005 Classification of lead content in coal MT/T964-2005 Standard download decompression password: www.bzxz.net

Some standard content:
1c5 /3. c4
T/T9642005
Classification of lead content in coal
Classification for Icadl in coal2005-09-23issued
National Development and Reform Commission
2006-02-01implemented
MT/T 9E4—20C5
This standard is formulated based on the consideration of the special requirements of coal production in China and the harm of coal to the environment, which can provide a reference for the identification of resource utilization characteristics and the use of this standard.
This standard is issued by China Coal Industry Association and National Coal Technology Committee! This standard is issued by China Coal Research Institute and National Coal Group Corporation. The standard is issued by Luoyang District.
1 Standard field
Classification of lead content in coal bZxz.net
This standard specifies the classification of lead content in coal according to the range of ten basic elements (Pb) and its naming and code. This standard is applicable to the classification of pyridine content in coal in the production and utilization of coal. 2 Normative reference documents
MT/T964-2005
The following documents are referenced by the standard clauses of this standard. Become a wooden cup added clause: All referenced documents before the date of the note, the amendment list (excluding the content of the error! Or the revised version after the baking is not applicable to this part, but the parties who have reached an agreement on this part can read the recorded versions of these documents. For referenced documents without a date of note, the latest version of the wooden standard applies. B474 Preparation method of coal fence ([51988: 1$75) 6B475 Dare to take the slice method of coal sample (1S0288: 075) G1/T481 Production method of coal Xiangcai clothing
G3 /T482·Preservation coal mixed with force method
11665% baking, sales. The method of determining the period
GB/T1S44 baking ticket mechanized selection method (1SO123:20 () 3 Technical requirements
3.1 Naming principles of classification codes
Lead content in coal is classified by the following symbols: "General, medium, high\" and the symbol of the element system, I.Pl: low lead coal, MP1: medium coal HPIs; high lead. 3.2 Phase content classification tax
Lead content in coal is in accordance with Table 1 Table 1 Classification of coal content 4 Sampling and preparation of samples Source name and standard According to the provisions of GB/T1943-175, the commercial coal sample shall be taken according to the provisions of GB/T481, the coal sample of coal seam shall be taken according to the provisions of G/T482, and the lead content of branch coal shall be determined according to the provisions of G/T1?1. 5 Test method The lead content of coal mouth shall be determined by signing.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
T/T9642005
Classification of lead content in coal
Classification for Icadl in coal2005-09-23issued
National Development and Reform Commission
2006-02-01implemented
MT/T 9E4—20C5
This standard is formulated based on the consideration of the special requirements of coal production in China and the harm of coal to the environment, which can provide a reference for the identification of resource utilization characteristics and the use of this standard.
This standard is issued by China Coal Industry Association and National Coal Technology Committee! This standard is issued by China Coal Research Institute and National Coal Group Corporation. The standard is issued by Luoyang District.
1 Standard field
Classification of lead content in coal bZxz.net
This standard specifies the classification of lead content in coal according to the range of ten basic elements (Pb) and its naming and code. This standard is applicable to the classification of pyridine content in coal in the production and utilization of coal. 2 Normative reference documents
MT/T964-2005
The following documents are referenced by the standard clauses of this standard. Become a wooden cup added clause: All referenced documents before the date of the note, the amendment list (excluding the content of the error! Or the revised version after the baking is not applicable to this part, but the parties who have reached an agreement on this part can read the recorded versions of these documents. For referenced documents without a date of note, the latest version of the wooden standard applies. B474 Preparation method of coal fence ([51988: 1$75) 6B475 Dare to take the slice method of coal sample (1S0288: 075) G1/T481 Production method of coal Xiangcai clothing
G3 /T482·Preservation coal mixed with force method
11665% baking, sales. The method of determining the period
GB/T1S44 baking ticket mechanized selection method (1SO123:20 () 3 Technical requirements
3.1 Naming principles of classification codes
Lead content in coal is classified by the following symbols: "General, medium, high\" and the symbol of the element system, I.Pl: low lead coal, MP1: medium coal HPIs; high lead. 3.2 Phase content classification tax
Lead content in coal is in accordance with Table 1 Table 1 Classification of coal content 4 Sampling and preparation of samples Source name and standard According to the provisions of GB/T1943-175, the commercial coal sample shall be taken according to the provisions of GB/T481, the coal sample of coal seam shall be taken according to the provisions of G/T482, and the lead content of branch coal shall be determined according to the provisions of G/T1?1. 5 Test method The lead content of coal mouth shall be determined by signing.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SB/T 10376-2004 Provisions for classifying and grading bakeries
- GB/T 3884.7-2000 Chemical analysis methods for copper concentrates - Determination of lead content
- HG/T 2128-1991 Technical requirements for chemical equipment, pipes and fittings made of acid-resistant phenolic plastics
- SJ 20058-1992 Semiconductor discrete device-Detail specification for silicon NPN low power switching transistor of Type 3DK105
- SY/T 5208-2000 Main lifting equipment for oil well repair
- JB/T 9957.1-1999 Performance test method for four-column hydraulic press
- JB/T 8775-1998 Closed adjustment shims for machine tools
- JB/T 3568-1999 Test method for thermomechanical properties of disc suspension insulator string components
- NY/T 395-2000 Procedural regulations regarding the enviroment quality monitoring of soil
- JJG 2066-2006 Verification Scheme of Measuring Instruments for Large Force
- GB/T 16303-1996 Technical requirements for free-fall lifeboat launching devices
- GB 13077-2004 Periodic inspection and evaluation of aluminum alloy seamless gas cylinders
- HG/T 2645-1994 Technical requirements for rubber cutting knives
- JB/T 7370-1994 Flexible graphite braided packing
- GB/T 17248.1-2000 Acoustics--Noise emitted by machinery and equipment--Guidelines for the use of basic STANDARDs for the determination of emission sound pressure levels at a work station and at other specified positions
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com