GB/T 5652-1985 Locking nut washers for flared pipe joints
time:
2024-08-04 14:41:20
- GB/T 5652-1985
- Abolished
Standard ID:
GB/T 5652-1985
Standard Name:
Locking nut washers for flared pipe joints
Chinese Name:
扩口式管接头锁紧螺母垫圈
Standard category:
National Standard (GB)
-
Date of Release:
1985-01-01 -
Date of Implementation:
1986-09-01 -
Date of Expiration:
2008-11-01
Standard ICS number:
Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting partsChina Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
Replaced by GB/T 5649-2008
Release date:
1985-11-25Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Pipe AccessoriesPublishing Department:
China Machinery Industry FederationCompetent Authority:
China Machinery Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
GB/T 5652-1985 Flared pipe joint locking nut washer GB/T5652-1985 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
National Standard of the People's Republic of China Flared type tube fittings-Back-up washer Flared type tube fittings-Back-up washer The standard applies to expanded type tube fittings-Back-up washer for pipe systems with oil and gas as the medium Other marking examples: Expanded type tube fittings with outer diameter D of 10mm: Lock nut washers 10 GB 5652--85 Outer diameter Basic size National Bureau of Standards 1985-11-25 Issued Limit deviation UDC 621.643.4: 621.882.4
GB5652—85
Quality (Steel)
kg/100wwW.bzxz.Net
1986-09-01Implementation
GB5652-85
Technical conditions shall be in accordance with the provisions of GB5653-85 "Technical conditions for expansion joints". This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and was drafted by the Standardization Research Institute of the Ministry of Machinery Industry. The seven drafters of this standard are Hu Lusheng, Li Xingning and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
GB5652—85
Quality (Steel)
kg/100wwW.bzxz.Net
1986-09-01Implementation
GB5652-85
Technical conditions shall be in accordance with the provisions of GB5653-85 "Technical conditions for expansion joints". This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and was drafted by the Standardization Research Institute of the Ministry of Machinery Industry. The seven drafters of this standard are Hu Lusheng, Li Xingning and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 4706.68-2003 Safety of household and similar electrical appliances Particular requirements for drives for vertically moving garage doors for residential use
- JB/T 8416-1996 Technical requirements for connecting rod bolts for internal combustion engines
- JB/T 3277-1991 Mine hoist and mine hoisting winch fluid
- GB/T 5242-1985 Inspection rules and test methods for cemented carbide products
- GB/T 20247-2006 Acoustics - Measurement of sound absorption in a reverberation room
- SB/T 10517-2009 Management technical criterion for commercial streets
- HG 2957.4-1984 Determination of sulfur content of alum ore sulfate barium sulfate gravimetric method
- JB/T 7838-1999 Electric circular saw
- JB/T 9038-1999 Aerated agitator flotation machine
- JB/T 9954-1999 Cleanliness of hydraulic system of forging machinery
- JB/T 9162.18-1999 Clamping rod joint dimensions
- GB/T 5437-1985 Transmission requirements for voice fax (type 3 machines)
- GB 19163-2003 Bullfrog
- JB/T 5440-1991 Ultrasonic flaw detection of compressor forged steel parts
- GB/T 3720-1988 Basic parameters of optical length measuring instruments
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]