INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3746.2-1983 Compression-type cross fitting

time: 2024-08-10 20:19:22
  • GB/T 3746.2-1983
  • Abolished

Basic Information

  • Standard ID:

    GB/T 3746.2-1983

  • Standard Name:

    Compression-type cross fitting

  • Chinese Name:

    卡套式四通接头体

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1983-06-17

  • Date of Implementation:

    1984-04-01

  • Date of Expiration:

    2008-11-01

standard classification number

  • Standard ICS number:

    21.060.60;

  • China Standard Classification Number:

    Machinery>>General Parts>>J15 Pipe Accessories

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1984-04-01

Other Information

  • Release date:

    1983-06-17

  • Review date:

    2004-10-14

  • Drafting Organization:

    Standardization Institute of the Ministry of Machinery Industry

  • Focal point Organization:

    National Technical Committee for Standardization of Pipe Accessories

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 3746.2-1983 Compression-type four-way joint body GB/T3746.2-1983 standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

Marking example:
National Standard of the People's Republic of China
Compression fitting cross-Body
Union cross-Body
Nominal pressure level I, compression fitting cross-Body with pipe outer diameter D of 14mmJ14GB3746.2—83
Published by the National Bureau of Standards on 1983-06-17
UDC 621.643.4
GB 3746.2—83
Other academic disciplines
Implemented on 1984-04-01
Ml0×1
M 12×1.25
M 14× 1.5
M 16× 1.5
M 18×1.5
M 20×1.5
M 22×1.5
M 27× 1.5
M30×2
M33×2
M 36×2
M42×2
M45×2
M18×2
M52×2
M 18× 1.5
M 20× 1.5
M 22× 1.5
M 27×1.5
M33×2
M36×2
M39×2
GB 8146.2—Ba
Nominal limit
Nominal limit
Dimension deviation
Note: The weight system is calculated, and the specific gravity is ?.85kg/dm. Technical conditions are in accordance with the provisions of GB3765-83. Additional remarks:
"Weight limit
Dimension deviation
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. 8bZxz.net
(kg/100 pieces)
This standard is drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and Shenyang Heavy Machinery, Chongqing Heavy Automobile Research Institute, Renlian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai Electromechanical Bureau No. 1 Science and Technology Information Institute, and the Seventh () Eighth Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Gan Muqin. From the date of implementation of this standard, the original departmental standard JB1970-77 "Compression fitting type cross-connector body" shall be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]