
GB/T 15186-1994 Separator types and basic parameters
time:
2024-08-08 23:53:34
- GB/T 15186-1994
- Abolished
Standard ID:
GB/T 15186-1994
Standard Name:
Separator types and basic parameters
Chinese Name:
分离机 型式与基本参数
Standard category:
National Standard (GB)
-
Date of Release:
1994-08-29 -
Date of Implementation:
1995-07-01 -
Date of Expiration:
2005-10-14
Standard ICS number:
Mining and Mineral Products >> 73.120 Mineral Processing EquipmentChina Standard Classification Number:
Machinery>>General Machinery and Equipment>>J77 Separation Machinery
alternative situation:
Replaces ZB J77 011-1990
Review date:
2004-10-14Drafting Organization:
Hefei General Machinery Research Institute Tumen CentrifugeFocal point Organization:
National Technical Committee for Separation Machinery StandardizationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Machinery Industry Federation

Skip to download
Summary:
This standard specifies the types and basic parameters of tubular separators, disc separators, and laboratory centrifuges. This standard applies to tubular separators, disc separators, and laboratory centrifuges (i.e. test tube separators). GB/T 15186-1994 Separator Types and Basic Parameters GB/T15186-1994 Standard Download Decompression Password: www.bzxz.net
- Recommended standards
- JB/T 5210-1991 Upper seal seat
- JB/T 8296.1-1999 Open wheelset for narrow-gauge mining vehicles
- JB/T 3334.1-2000 Brakes for hydro-generators Part 1: Brakes for vertical hydro-generators
- JB/T 5932.2-1991 Crawler bulldozer sealed track link
- GB/T 14926.6-2001 Detection method of Bordetella bronchiseptica in experimental animals
- HG 2956.1-1982 Rules for analysis of boron and magnesium ores
- GB/T 3253.2-2001 Chemical analysis method for antimony - Determination of iron content
- GB/T 15169-2003 Skill assessment of welders for steel fusion welding
- JB/T 9536-1999 Technical requirements for indoor and outdoor corrosion-resistant low-voltage electrical appliances
- JB/T 10332-2002 Routine specification for safe operation of lathe chucks
- YY/T 0457.7-2003 Characteristics of optoelectronic X-ray image intensifiers for medical electrical equipment Part 7: Determination of modulation transfer function
- JB/T 9168.3-1998 General process code for cutting milling
- GB/T 14651-1993 Technical requirements for partially enclosed lifeboats
- GB/T 2900.62-2003 Electrical terminology Primary battery
- DB33/T 343-2015 Technical regulation of Cultivation for Bamboo shoot of Dendrocalamopsis oldhami
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com