
Dangerous goods - Leakproofness test method for portable tank
time:
2024-06-29 06:15:19
- GB/T 21597-2008
- in force
Standard ID:
GB/T 21597-2008
Standard Name:
Dangerous goods - Leakproofness test method for portable tank
Chinese Name:
危险品 便携式罐体防漏试验方法
Standard category:
National Standard (GB)
-
Date of Release:
2008-04-01 -
Date of Implementation:
2008-09-01
Standard ICS number:
Environmental protection, health care and safety >> 13.300 Dangerous goods protectionChina Standard Classification Number:
Comprehensive>>Marking, packaging, transportation, storage>>A80 Marking, packaging, transportation, storage Comprehensive
publishing house:
China Standards PressISBN:
155066·1-31822Publication date:
2008-06-01Plan number:
20068221-T-469
Release date:
2008-04-01Review date:
2023-12-28Drafter:
Zhao Haolibao, Wang Libing, Xu Chuanlai, Feng Zhijie, Wang Xiaobing, Yu ZhiruiDrafting Organization:
Tianjin Institute of Inspection and Quarantine, Jiangnan University, Sinochem Chemical Standardization Institute, etc.Focal point Organization:
National Technical Committee on Hazardous Chemicals Management StandardizationProposing Organization:
National Technical Committee on Hazardous Chemicals Management StandardizationPublishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of ChinaCompetent Authority:
National Standardization Administration

Skip to download
Summary:
This standard is published for the first time. This standard specifies the test equipment, test steps and test report for the leak test of portable tanks for dangerous goods. This standard is applicable to the leak test of portable tanks for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21597-2008 Leak test method for portable tanks for dangerous goods GB/T21597-2008 Standard download decompression password: www.bzxz.net
This standard is published for the first time. This standard specifies the test equipment, test steps and test report for the leak test of portable tanks for dangerous goods. This standard is applicable to the leak test of portable tanks for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations", and the degree of consistency is not equivalent. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Dangerous Chemicals Management Standardization (SAC/TC251).
The responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard: Zhao Haolibao, Wang Libing, Xu Chuanlai, Feng Zhixie, Wang Xiaobing, Yu Zhirui.
This standard is published for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties that reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this standard.
GB19454.1 General Rules for Safety Specifications for Inspection of Portable Tanks of Dangerous Goods
United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations"
This standard is published for the first time. This standard specifies the test equipment, test steps and test report for the leak test of portable tanks for dangerous goods. This standard is applicable to the leak test of portable tanks for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations", and the degree of consistency is not equivalent. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Dangerous Chemicals Management Standardization (SAC/TC251).
The responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard: Zhao Haolibao, Wang Libing, Xu Chuanlai, Feng Zhixie, Wang Xiaobing, Yu Zhirui.
This standard is published for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties that reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this standard.
GB19454.1 General Rules for Safety Specifications for Inspection of Portable Tanks of Dangerous Goods
United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations"

Some standard content:
10 13.300
Chinese People's Government and User Standard
G8/21597---2008
Dangerous goods
Leakproofness test method for nartabir tank
Dangerous goods---Leakproofness test method for nartabir tankIssued on April 1, 2008
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Implemented on September 1, 2008
/1 21597--2008
This standard is not equivalent to the relevant technical content of the above manual, and the standard text format is in accordance with B/T1.1-20. The national hazardous chemicals control standard must be technically approved by the National Hazardous Chemicals Control Standard A. This standard is implemented ...
Test method for anti-bacteria testing of portable tanks
Hazardous goods
This standard specifies the test equipment, test requirements and test report for the sterilization test of portable tanks for dangerous goods. This standard is used to carry out joint testing on portable tanks for dangerous goods? Normative use of the selected documents
C8/1 21597---2008
The service clauses in the listed documents are generally quoted in the title of this standard. All the documents in the following period are not applicable to this standard. However, according to this standard, the latest and most recent version of these liberal arts books is used by the guests of the UK for research.
All the joint use fees of the joint
Ailon#portable
Joint leisure American heavy joint pharmaceutical transport store
3 Terms and definitions
3B 141546
Li Xintan
Portable tank pertle iank
Used to transport energy! Class
Self-serviced
Pressure-proof equipment and structures 3.2
Portable gas-filled material
Isolated filling
Serviced
Auxiliary melt
Its new color is suitable for this standard.
Sheden's following terms and definitions apply to the following standards. Portable tank shell equipped with auxiliary equipment including external textile storage instrumentation and loading equipment, Lingquan, postal heat and cooling devices 3.4
Maximum working pressure E strong masinn alwabte woig The pressure is not small under the working state in the tank change limit part of the test board under the two jade cautious in the teaching: support! In the invitation to welcome the goods 3, the maximum thrust effect allowed in the explosion charge is installed, and the design of the most effective pressure is not less than the sum of the following full items: the material in the text (such as the glass under the high-pass material, the highest source w
degree of material in the auspicious loading street goods city medical secret abalone for the explosion generation according to the reduction of 10 households: the body to the baby full of air to the inside of the stealing gas and other representatives of the body of the medical (household), the points are filled with the actual loading, the solution of the goods breaking the selection of the room in the loss process of the most intentional temperature waist hair low selection) take and evaluate the overall invitation to open a simple installation temperature, carefully for 15,: 0 it, the highest average overall intake caused by the previous liquid color service decision, 3. 5
barrier test eakpros tent
The test of using gas to fill the end and its auxiliary equipment with a pressure not less than the maximum allowable working pressure is not far from the effective internal pressure, C8/1 21897-~200B
4 Test equipment
Medical pressure gauge
Pressure:
Inspect condensate puller
5 Test steps
Each 1 will be pressure gauge two stages of the gas tank to the new test sample (for the idle device with air intake twist, the air supply seal or end of the discharge nipple should be replaced, the joints are airtight 5.2 The gas release device is placed in water, and the gas is maintained. The internal pressure of the container is not less than the maximum allowable working pressure 21. The final effective internal pressure
5.3 Deding!mir.Observe the fragrance 5. When the bubble is placed in the test body, the damage is minor and the method is wide. When the test body is placed in the whole condensation water storage container, it will not affect the inspection results. The method of using electrolytic liquid is:
5 Test report
Test questions Product type, number, specification
Annual production enterprise name:
Only the test results of the portable continuous training business you have the test results certificate, as well as the details observed in the reduction of the test help explain the phenomenon of test reduction: This shows that the test companion period, the test person’s signature and the test unit seal, 3
GB/T 21597-2003
Small body Qian Xinghe instrument
Family standard push
Portable magic body leak test methodbZxz.net
Energy tester
GRT 21392 ---2ece
China Environmental Protection General Release Rescue North Edition Issue
No. 3, Sanchong Hebei Street, Fuxingwai, Beijing
Government code 101
Website lups,ner.eu
Tel: 6332391468817521
China Standard Energy Publishing House Ticket Collection and Broadcasting
Service Land Huaxiu Group Education Hall
Open 183 01 account 6 number home
May 2nd year 6 use the first - drink accumulation
$ number: 155056: 131822 price 10.00
with American sales
Qushuishe Distribution Center exchange
Copyright recommendation love effect must be investigated
Reference phone: (010) 68533533
8002--169121/0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Chinese People's Government and User Standard
G8/21597---2008
Dangerous goods
Leakproofness test method for nartabir tank
Dangerous goods---Leakproofness test method for nartabir tankIssued on April 1, 2008
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Implemented on September 1, 2008
/1 21597--2008
This standard is not equivalent to the relevant technical content of the above manual, and the standard text format is in accordance with B/T1.1-20. The national hazardous chemicals control standard must be technically approved by the National Hazardous Chemicals Control Standard A. This standard is implemented ...
Test method for anti-bacteria testing of portable tanks
Hazardous goods
This standard specifies the test equipment, test requirements and test report for the sterilization test of portable tanks for dangerous goods. This standard is used to carry out joint testing on portable tanks for dangerous goods? Normative use of the selected documents
C8/1 21597---2008
The service clauses in the listed documents are generally quoted in the title of this standard. All the documents in the following period are not applicable to this standard. However, according to this standard, the latest and most recent version of these liberal arts books is used by the guests of the UK for research.
All the joint use fees of the joint
Ailon#portable
Joint leisure American heavy joint pharmaceutical transport store
3 Terms and definitions
3B 141546
Li Xintan
Portable tank pertle iank
Used to transport energy! Class
Self-serviced
Pressure-proof equipment and structures 3.2
Portable gas-filled material
Isolated filling
Serviced
Auxiliary melt
Its new color is suitable for this standard.
Sheden's following terms and definitions apply to the following standards. Portable tank shell equipped with auxiliary equipment including external textile storage instrumentation and loading equipment, Lingquan, postal heat and cooling devices 3.4
Maximum working pressure E strong masinn alwabte woig The pressure is not small under the working state in the tank change limit part of the test board under the two jade cautious in the teaching: support! In the invitation to welcome the goods 3, the maximum thrust effect allowed in the explosion charge is installed, and the design of the most effective pressure is not less than the sum of the following full items: the material in the text (such as the glass under the high-pass material, the highest source w
degree of material in the auspicious loading street goods city medical secret abalone for the explosion generation according to the reduction of 10 households: the body to the baby full of air to the inside of the stealing gas and other representatives of the body of the medical (household), the points are filled with the actual loading, the solution of the goods breaking the selection of the room in the loss process of the most intentional temperature waist hair low selection) take and evaluate the overall invitation to open a simple installation temperature, carefully for 15,: 0 it, the highest average overall intake caused by the previous liquid color service decision, 3. 5
barrier test eakpros tent
The test of using gas to fill the end and its auxiliary equipment with a pressure not less than the maximum allowable working pressure is not far from the effective internal pressure, C8/1 21897-~200B
4 Test equipment
Medical pressure gauge
Pressure:
Inspect condensate puller
5 Test steps
Each 1 will be pressure gauge two stages of the gas tank to the new test sample (for the idle device with air intake twist, the air supply seal or end of the discharge nipple should be replaced, the joints are airtight 5.2 The gas release device is placed in water, and the gas is maintained. The internal pressure of the container is not less than the maximum allowable working pressure 21. The final effective internal pressure
5.3 Deding!mir.Observe the fragrance 5. When the bubble is placed in the test body, the damage is minor and the method is wide. When the test body is placed in the whole condensation water storage container, it will not affect the inspection results. The method of using electrolytic liquid is:
5 Test report
Test questions Product type, number, specification
Annual production enterprise name:
Only the test results of the portable continuous training business you have the test results certificate, as well as the details observed in the reduction of the test help explain the phenomenon of test reduction: This shows that the test companion period, the test person’s signature and the test unit seal, 3
GB/T 21597-2003
Small body Qian Xinghe instrument
Family standard push
Portable magic body leak test methodbZxz.net
Energy tester
GRT 21392 ---2ece
China Environmental Protection General Release Rescue North Edition Issue
No. 3, Sanchong Hebei Street, Fuxingwai, Beijing
Government code 101
Website lups,ner.eu
Tel: 6332391468817521
China Standard Energy Publishing House Ticket Collection and Broadcasting
Service Land Huaxiu Group Education Hall
Open 183 01 account 6 number home
May 2nd year 6 use the first - drink accumulation
$ number: 155056: 131822 price 10.00
with American sales
Qushuishe Distribution Center exchange
Copyright recommendation love effect must be investigated
Reference phone: (010) 68533533
8002--169121/0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 16003-1995 Diagnostic criteria for Kaschin-Beck disease
- SC/T 5014-2002 Basic conditions for testing fishing gear materials Standard atmosphere
- QB/T 1723-1993 Bicycle bell
- GB 5584.3-1985 Copper, aluminium and their alloy flat wires for electrical use Part 3: Aluminium flat wires
- QB/T 2747-2005 Negative pressure filling machine for liquids without gas
- JB/T 6451-1992 General technical requirements for brake electromagnets
- GB 16371-1996 Occupational chemical skin burns diagnostic criteria and management principles
- GB/T 14617.1-1993 Propagation characteristics of land mobile and fixed services Part 1: Propagation characteristics of land mobile services
- JB/T 8824.4-1998 Unified thread nut taps
- JB/T 7780.1-1995 Test Method for Mechanical and Physical Properties of Wire for Rivet Contacts
- JB/T 4334-1992 Technical conditions for static pressure air bearing turbine expander
- GB 18587-2001 Limits of harmful substances released from carpets, carpet pads and carpet adhesives for interior decoration and furnishing
- HG/T 2680-1995 Industrial magnesium sulfate heptahydrate
- GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
- JB/T 8825.6-1998 Whitworth thread rolling plate
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]