
JB/T 2001.50-1999 Columnar accumulator tank for water system pump station (PN=31.5MPa)
time:
2024-08-11 18:39:56
- JB/T 2001.50-1999
- in force
Standard ID:
JB/T 2001.50-1999
Standard Name:
Columnar accumulator tank for water system pump station (PN=31.5MPa)
Chinese Name:
水系统 泵站用柱形蓄势器水罐(PN=31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2053-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee

Skip to download
Summary:
JB/T 2001.50-1999 JB/T 2001.50-1999 Columnar accumulator tank for water system pumping station (PN=31.5MPa) JB/T2001.50-1999 Standard download decompression password: www.bzxz.net

Some standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
1 Scopewww.bzxz.net
Machinery Industry Standard of the People's Republic of China
Cylinder accumulator water tank for water system pump station
Wuler svttcmWster cylindricalaceumuatnn【PN=31.5 MPa]
This standard specifies the type, size and technical requirements of columnar separators, JE/T2001.5U-190
and JB205.-81
This standard is used for columnar separators for pumping stations with a nominal pressure of 31.5M4 and water and air as the medium. 2 Types and sizes
1.1 Type A: The type and size of the high-support separator tank shall be in accordance with the provisions of Figure 1 and Table 1. The base channel should be designed to be conical in width to maximize the open space when the base strength is sufficient. 2.2B: The type and size of the low-support separator tank shall be in accordance with the provisions of Figure 2 and Table 2. It is applicable when the entire station area is overhead: 2.3 The technical dimensions of Type A and B separators are shown in Figure 1. 3 Technical requirements 3.1 The gas connection is equipped with an upward gas-guiding auxiliary plate to prevent the gas from directly rushing into the water level indicator and affecting the accuracy of the water level indicator. 3.2 Except for the specially provided convex pad, the tank body shall not be connected to it. 3.3 Due to the reasons of technology and material, the thickness of the super body is different, and the strength is guaranteed to be safe under 31.5m2. 4 Marking example
High-support control A-rod water
Rod color water (A type! 4mJB/T2001.50-1999 National Machinery Industry Bureau 1999-(K6-28 approved 1.3-4
20-(1-01 actual gun
main material science
IAM:NiMNI
JB/T2001.50—1999
military plan
DN ACC
vomit 2 moon type
Hong Kong measurement port
hand body material
13VmNiMoNb
Japanese H35
F8/T2001.501999
12×2 is
drop A type, moon type water tank external connection size small
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
1 Scopewww.bzxz.net
Machinery Industry Standard of the People's Republic of China
Cylinder accumulator water tank for water system pump station
Wuler svttcmWster cylindricalaceumuatnn【PN=31.5 MPa]
This standard specifies the type, size and technical requirements of columnar separators, JE/T2001.5U-190
and JB205.-81
This standard is used for columnar separators for pumping stations with a nominal pressure of 31.5M4 and water and air as the medium. 2 Types and sizes
1.1 Type A: The type and size of the high-support separator tank shall be in accordance with the provisions of Figure 1 and Table 1. The base channel should be designed to be conical in width to maximize the open space when the base strength is sufficient. 2.2B: The type and size of the low-support separator tank shall be in accordance with the provisions of Figure 2 and Table 2. It is applicable when the entire station area is overhead: 2.3 The technical dimensions of Type A and B separators are shown in Figure 1. 3 Technical requirements 3.1 The gas connection is equipped with an upward gas-guiding auxiliary plate to prevent the gas from directly rushing into the water level indicator and affecting the accuracy of the water level indicator. 3.2 Except for the specially provided convex pad, the tank body shall not be connected to it. 3.3 Due to the reasons of technology and material, the thickness of the super body is different, and the strength is guaranteed to be safe under 31.5m2. 4 Marking example
High-support control A-rod water
Rod color water (A type! 4mJB/T2001.50-1999 National Machinery Industry Bureau 1999-(K6-28 approved 1.3-4
20-(1-01 actual gun
main material science
IAM:NiMNI
JB/T2001.50—1999
military plan
DN ACC
vomit 2 moon type
Hong Kong measurement port
hand body material
13VmNiMoNb
Japanese H35
F8/T2001.501999
12×2 is
drop A type, moon type water tank external connection size small
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 4099-1983 Commonly used terms, terms and their codes (symbols) for navigation
- SY/T 4079-1995 Specification for construction and acceptance of petroleum and natural gas pipeline crossing projects
- JB/T 9833-1999 Tractor chassis parts names
- JB/T 5893.3-1991 Raw materials for electrical porcelain Zuoyun clay ore
- GB/T 50095-1998 Basic hydrological terms and symbols
- SJ/T 10342-1993 X34-10 and X34-11 self-adhesive paint for use in electronic industry
- HG/T 20569-1994 Mechanical stirring equipment
- GB 12897-1991 National first and second class level measurement specifications
- JB/T 9161.3-1999 Dimensions of internal grinding machine adapter rods, type A
- GB/T 2679.10-1993 Determination of short-distance compressive strength of paper and paperboard
- GB/T 4999-2003 Terminology of anesthetic breathing equipment
- CB 700-68 Technical specifications for connecting rod bolts and nuts for diesel engines
- GB/T 32625-2016 Specifications for human resources management consultation service
- GB/T 2790-1995 Test method for 180 degree peel strength of adhesives - Flexible materials to rigid materials
- SJ/T 10719-1996 Examples for preparation of design documents used in esectronic equipments
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com