JB/T 10301-2001 Earth-moving machinery driver's seat dimensions and requirements

JB/T 10301—2001 This standard is equivalent to ISO 11112:1995 "Earth-moving machinery - Driver's seat - Dimensions and requirements". This standard specifies the dimensions, requirements and adjustment range of the driver's seat, and provides the dimensions of the armrests for seats equipped with armrests. This standard applies to earth-moving machinery specified in GB/T 8498—1999 "Terms of basic types of earth-moving machinery". This standard is published for the first time. JB/T 10301-2001 Dimensions and requirements of driver's seat for earth-moving machinery JB/T10301-2001 Standard download decompression password: www.bzxz.net

ICS53.100
Machinery Industry Standard of the People's Republic of China
JB/T10301—2001
eqyIso11112199s
Earth-muving machinery
Operatur's seat-Dimensions and reguirements
Earth-muving machinery-Operatur's seat-Dimensions and reguirements2001-08-23Published
China Machinery Industry Federation
2001-12-01 Implementation
.1B/T10301-2001
Equivalently adopts IS11112:1995 Earth-moving machinery - Driver's seat - Dimensions and requirements. Compared with 1S011112:1995, this standard has some changes in the main technical content. Only in the referenced standards, the contents of the relevant standards for reference conversion are slightly changed. The following changes are required: GB/T8420-20006 Earth-moving machinery driver's body dimensions and minimum movement space for driver's lever 3 is equivalently adopted; S03411:1995 Earth-moving machinery driver's body dimensions and minimum movement space for driver 3 is equivalently adopted. Although the actual understanding of this standard will not be affected, it may have unpredictable content extension, expansion and restriction; the referenced GR/8498-1990 Earth-moving machinery type terminology 3 is equivalently adopted? 136165:19971:1997-type number-basic type number. When converting to this standard, the contents of ISO 6165-1S01U261:1994 "Product Identification System" will be excluded. When the actual use and understanding of the standard is not implemented, it will not be affected, but there may be certain extensions, limitations and restrictions that are not confirmed. This standard was proposed by the Technical Committee of Standardization of the 7th Engineering Machinery. The origin of this standard is: China Engineering Machinery Research Institute: The main drafters of this standard are Wu Runcai, Chang Qiaotong. The main standard is the second edition.
JB.T10301-2001
ISO Foreword
150 (International Organization for Standardization) is a world alliance of national standards bodies (80 countries). The work of formulating international standards is carried out by ISO technical committees. Each member country has the right to participate in established technical committees and topics of interest. International organizations, non-governmental organizations and organizations in contact with ISO may participate in this work. ISO collaborates closely with the Electrotechnical Commission for Electrotechnical Standardization (EC) for electrotechnical standardization. Draft international standards are adopted by the technical committee and circulated to the member countries for voting. Publication as an international standard requires at least 50% of the member countries to vote.
International Standard S011112 is produced by Technical Committee S011112, Technical Committee S011117, Technical Committee S011118, Safety Requirements and Human Factors.
【Scope
Machinery Industry Standard of the People's Republic of China
Dimensions and requirements of driver's seat
Earth-moving machinery
Earth-moving machineryOpernlor's seatDituensiong ind requirementsJH/T 10301-2001bzxz.net
eqy150 11112:1995
This standard specifies the dimensions, requirements and specifications for driver's seats and provides dimensions for seats with armrests installed. The whole standard applies to the upper machinery specified in GB/T84984. Referenced standards
The texts contained in the following standards constitute the provisions of this standard through reference in this standard. When the standard is revised, the version indicated is effective. All standards will take effect as of revision. The parties using this standard shall discuss the possible production of new versions of the following standards: H8420-2000
GB/I ​​8498--1994
G/I 8591--2000
3 Seat requirements
Overhead machinery driver's body size and minimum driver's activity space Basic types of machine thresholds Terminology
Overhead machinery driver's seat standard points
3.1 According to the ergonomic requirements of the driver's body size from the 5th percentile to the 95th percentile in GB/T8420, the correct dimensions of the seat related components and their finger positions and adjustment amounts are specified. 3.2 The dimensions of the driver's seat and the relevant adjustment dimensions are shown in Table [1], which includes the basic dimensions and adjustable dimensions. The provided seat dimensions and adjustment amounts are based on the seat fixing point (SIP) specified in CB/T8591. Other dimensions and sections not specified in the standard may be used as long as they can best adapt to the machine. 3.3 In case of a higher S[P] (see GB859), the seat backrest and seat support should be considered. 3.4 In order to ensure that the machine can be moved in and out of the machine seat with minimum hindrance, one or both sides of the soft handrail should be movable if necessary. When the machine is operated in this condition, the operator shall have a fixed device: 3.5 The equipped driver's seat can be rotated and tilted. The rotation is carried out to improve the driver's working position and exit method. In order to prevent dangerous movement of the seat during machine operation, a fixed device for holding the seat (rotation or tilt) in the working position shall be provided. China Machinery Industry Federation Approved by the meeting on 2001-08-23 and implemented on 2001-12-01
Chart number
Seat length
Coming business
Front and rear sections 1:
Chuzhou section
JHTT10301-2001
Table seat size
Note the maintenance section height!
Including the upper part of the grid sample pad!
Close the lower part of the fixed size:
Autumn hand height:
Armrest width:|| tt||My width "
Hold the thick seat":
High pressure from S[P to the center of the support
Waist radius 11
Pad two corners!
Firmly pad you use the Xie section to show*
Doctor will Gong Yige Shun Angle\
Real pick cream mouth Pei Shun Angle adjustment egg 2
1) Door more shrimp ground adaptor machine, based on the requirements of human 1 ergonomics can change the chain large and small values. The recommended value is generally the average value, E is still the average value.
2) Two The test section is a teaching section, the section should be a separate section of the torsion device: when turning around, the body must have a good quality and lower body resistance or better seat resistance, the learning point is 300 m
4! The thin attachment needs to be rotated backwards, the maximum width should be 33Dmm per seat support can have a larger or smaller rate of 5, the upper and lower parts should move with the seat support vertical and horizontal sections. The support can read the "smallest value required in the vertical direction, SIP to the vertical wind value.
7) The normal value of the curvature of the support within the vertical plane should be KIrm, the minimum is 15lamm. 8) The P seat back angle is measured based on the original position of the joint (4 degrees back) and the angle of the back is slightly higher than the original position of the joint. The back can be measured with the midline of the joint. If there is a support, the back can be slightly lower and the back can be adjusted above the waist support. The back angle can be increased by 5° or more. 1) SP GT gS91.
J8/T10301-2001
Figure Seat size
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.