GB/T 4780-2000 Terminology for automobile body

This standard specifies the terms and definitions of automobile bodies. This standard applies to the bodies of cars, buses and trucks. GB/T 4780-2000 Automobile Body Terminology GB/T4780-2000 Standard download decompression password: www.bzxz.net

ICS 43.040.60
National Standard of the People's Republic of China
GB/T47802000
Terms for motor vehicle body
Promulgated on 10 June 2000
Implementation on 1 January 2001
Promulgated by the State Administration of Quality Supervision, Inspection and Quarantine
CB/4780—2000
This standard is based on JB365319816 Passenger car body terminology, B/472—1984 Truck body terminology, and GR/T12484—1930 Passenger car body terminology, with reference to foreign relevant vehicle and terminology systems. Appendix A and Appendix H of this standard are both appendices of the proposed standard. This standard is effective from the date of implementation. GB/T4785-1984. GB/T12481-1990 This standard is proposed by China Automobile Industry General Administration. This standard is under the jurisdiction of the National Automobile Standardization Technical Committee. The drafting units of this standard are Dongfeng Motor Industry Research Institute: Dongfeng Motor Co., Ltd., Shanghai Travel Bus Factory, FAW Wuji Automobile Co., Ltd., Jiangsu Yadan Research Group Co., Ltd. The main drafters of this standard are Zhu Caiyan, Wu Gong, Yu Bomei, Mei Yaoyao, Li Qin, a group of leaders, Zhang Yi, Wu Lu, and Hao Fang: GB/T4780-1584 Terminology of Truck Body and GB/T121R4-1990 Technical Specification of Passenger Car Body are first issued in November 1984 and September 1990 respectively. 1 Scope
National Standard of the People's Republic of China
Terminology for Motor Vehicle Body
Terminology for Motor Vehicle Body This standard specifies the general definition of terms for motor vehicle body. This standard is applicable to the body of passenger vehicles: 2 Classification
GET47B
B/TA?-
G8/T124A41.9
This standard divides the terms for motor vehicle body into design terms, structural terms, parts terms, and accessory terms: terms applicable to passenger cars are indicated by letters, terms applicable to passenger cars are indicated by letters, and terms applicable to trucks are indicated by letters C. 3 Design terms
Design terms are shown in Table 1.
Terms not included in Table 1
3. 2 Underbody
Semi-underbody
Non-double-book type vehicle
One-unload type vehicle
Yang type vehicle
Three-purpose body
Enclosed body
Driver operation, as well as two spaces for passengers and cargo, the main function is to provide passengers with a safe and comfortable riding environment, without the influence of bad weather. Refers to the body and decorative parts, opening parts, mechanism parts, carvings and other detachable and rotatable components. The body form without independent frame. The body and frame are connected, and the car is a part of the body structure. The engine, cabin and luggage are glued to the body to form a natural body. The engine, passenger compartment and luggage are glued to the body to form a whole shape .... The engine, passenger compartment and luggage are glued to the body to form a whole shape. The engine, passenger compartment and luggage are glued to the body. The engine, passenger compartment and luggage are glued to the body. The engine, passenger compartment and luggage are glued to the body. The engine, passenger compartment and luggage are glued to the body. The engine, passenger compartment and luggage are glued to the body. The engine, passenger compartment and luggage are glued to the body. The engine, passenger compartment and luggage are glued to the body. The engine, passenger body
hatrh Ik hualy
ihree bux tyn budy
item benefits as a step of the vehicle body part of the vehicle wear elosingbody national decline quality and technical supervision bureau 2000 06 10 approval number
A, B, C
2001-D1-01 implementation
open car school
driving test room
flat head driving room
long head driving room
rotating driving room
single row crawling driving room
double row seat pregnant empty
transmission empty
remove the body
vehicle point body
vehicle body porridge
Haishu District
3.27 passenger area
engine
Front of the vehicle
Rear of the vehicle
Body bottom
Body balance
Floor system
GB/T47802000
Table 1 (continued)
Storage items are loose items or customer-installed items. The body needs to be openable and closable
The body of a truck
The length of the engine is more than half of the windshield
The driver's compartment behind the front of the glass
The driver's compartment with front panel parts other than the flat-head cab
tt||Driver's cab that can be tilted forward as a whole
Driver's cab with only one seat
Driver's cab with two rows of seats in the front
Equipped with an external examination room
White body after removal
An assembly consisting of body parts, layered parts and their removable parts
An assembly that cannot be disassembled after the drilling parts and covering parts are connected or coordinated
An intermediate frame structure mainly formed to ensure the strength and toughness of the body
An area for driving equipment operation and riding
An area for passengers to use Area used by passengers, that is, the total of the driving area and the passenger area. Space for placing the engine. Space for placing luggage. The body space before the cabin. The body space after the passengers. The total of the passenger compartment, engine room, and luggage compartment. The general term for the front part of the vehicle. The body below the floor is also the front part. Located at the bottom of the vehicle, including the frame and panels. hody!
convertible bady
cebfrant bady
forward ci>ntrol cal
cab over engine
conventional caby
nurmal control cab
tilting cab
I Ringle tah
double cab,crev cab
sleeper sh, cah ith
body on primer
BIW(bady in white)
mein bady: bpdy atruc-
buly skeleton
driver crnpartntent
Passrger
PA5Senger ADACe
cnginc comper-mcnt
Jughage crntaarinieni
front:hady
rear body
under body
side body
ground and related body parts, etc., constitute the general term for the body parts
A, H, C
front system
rear system
project system
door system
body energy-saving parts
car structural features
front panel parts
and start parts
mechanical parts
decorative parts
body limiter
complete structure
anti-theft device
air conditioning system
radio system
3.49 door
G/T 47802000
Table 1)
Located at the front of the energy storage, it is composed of the frame, panels
windproof evening balance and related body parts and components
The general term for the two systems of passenger and passenger car bodies.The general term for the parts composed of the frame, panels, and related body accessories, etc. The general term for the rear passenger compartment composed of the frame, panels, and related body accessories, etc. The general term for the parts composed of the frame, panels, and related body accessories, etc. The general term for the parts composed of the door, panels, interior, glass, and accessories, etc. The general term for the panel parts on the surface of the body or the body, supporting parts and parts that verify the strength and matching of the body, the general term for the front and rear doors of the body and the quality of the vehicle, the structure of various hatches that can be assembled on the body, and the virtual English words, hady iron wall; ftoni
bedy side body rear wall, body sturdy, bright, sturdy, front body shell, [ron?
sheet metal
tompartmenttl>i;
with the simulation, dynamic, direct dynamic parts of the parts to play the role of decoration and beam protection
with independent functional opening section in the body of the parts, such as rear mirror, wiper, etc., the mechanism of limiting and starting the opening of the parts
in the car, the total pressure that can be adjusted on the car is
: ] The device for the treatment of the reproductive organs
Use the dry control cabin source, condensation, and scenery of the things component assembly
The general name of the device for the digging of personnel and the movement of objects
A person! The parallel interface
hardware
trim igernish
body accessories
checkaop
adjuser
Rncitheft
JIVAC,cliraate control
coor opering
3.309 door frame
body fulcrum
safety belt installation and fixation
seat fixing point
safety exit
3.56 wine language
3.60 medical line
2.6, opening line
wheel guard
that is, the empty reading
head space
GB/T 4780—2000
Table 1)
The sealing frame of the door assembly
The parts of the lower part of the door frame
For assembly on the vehicle, the support point
refers to the part of the vehicle body or seat frame used to install and fix the seat belt assembly
The part of the vehicle body used to install the seat replacement parts
The walking space for passengers from one (row) seat to another (row) or to the passenger door on the upper step board: It does not include:|| tt||a) The space 300mm in front of the seat;
b) The space above the stepping stone or the steering wheel;
c) The space occupied by the seat
The space passed through the passenger door and the safety door
The space inside the body
The decoration on the outside of the body
Located in the lower part of the vehicle, the reverse characteristic lines running through the front and rear
The key lines on the doors, engine hood, tires and other parts of the vehicle body
The openings on the vehicle body for wheel installation and steering gear
The parts that are useful for blocking the pollution and flying platform generated when the wheel is running. It can be a separate component, including a part of the car
space for passengers to move forward when sitting without load
space for passengers to move around when sitting
flexible compartment connecting the body and the frame
English words
daarframe
rocaer
jcking puai
scut beit archor point
sest snchor pont
emergency ekil
gangway
CCARN PASSAXA
ier:or rim
rxieriur trim
raist linc; belt linc
sphaing line
wheel opruirng: wne+!
wheel guards
foctroom
bead-oum
Lgriy imnounting
Figure 3 AJC
Structural terms
Structural terms see 2.
GB/T 4780—2000
Table 2 Structural terms
Plates with positive force or other T. law shapes
Plates with protective and reinforcing functions outside the decoration
4.5 Floor vents
Front end push frame
Glass guide drill
4.1℃ Reinforcement
Rolling parts
Fixing parts
1.13 Angle brace
Connecting parts
Parts that play a vertical supporting role or
Structural parts set in the same direction
The center of the panel, longitudinally covering the drive shaft or exhaust part
The front adjustment of the car body and the left and right sides are connected inversely to the moving track, which is the same as the part that increases the strength and stiffness of the component
Parts formed by rolling the panel
Parts that play the role of supporting, fixing and contracting. Product parts: high strength, that is, rigid parts
Parts with protective and saturation functions
Parts with flexible and isolating functions
Parts with strengthening or adjusting functions
Parts that can be used for a long time
Parts that are subject to national regulations
Parts that can cause sinking or micro-vibration in the event of a rotten state
Parts that rotate around the axis
Parts that lock bamboo pieces
Parts that can play certain mechanical protective and covering functions
Corresponding English: Dut panel iskin
Ppnet pillar
eross memher
lougitucinul rail
floprtunne:
GCP ( grit apening
paneli
! glass run rail
reinforeer.cnty atiff-
roled past
relainer :lixel pr!
guese1
feruler +shielu!
: chanwding pael
supeort
brecke-
erill guard
striker
pregnancy limit block
flow tower
terms of parts
GB/T 4780·--2000
Table complete)
Uniform system compression parts for the lifting factory or me to protect and cover
Through the factory calibration to play a role in the fixing
Corresponding to the English far
uuwT;lid
trim&trip
Welded into the body of the car, the same Ding and the same bone, the line lip
point of the zero companion
Parts that play the role of the guide surface limit
Chuan! The box of the south water guide
The shape of the stop is the shape.The structure that can be customized for the time being
The concave and convex shape that enhances the performance of the parts
The part that is turned up by the part
It is the part used for the time being
The terminology of parts can be shown in Table 3,
Table 3 Technical operation of parts
Floor beam
The lower edge of the door hammer
The front national industrial board
The front foreign technology
5. 2 Front side panel
5.li windshield
windshield glass
5.13 no panel
the panel of the bed side
the lower body warehouse part, use 1 lubricated floor small play a weak role of the dyeing structural parts
the lower part of the body connection book, the rear hanging bag and the footrest parts
are all in the floor form, the super decoration and heat trap military parts
the windproof lower part of the outer part as much as possible
the front two vertical control
position! Front awning inner two lines of the fastening plate
install the windshield attack frame
the front window of the small passenger ship, the installation indicator and the operating parts of the parts
: arip hanrl
gut-cr igsid: irroove
Corresponding English words
florr penel:tlour board
bodyundarurure:
Fuud., 'rn; fleur meir:
roek panel;sid- st]
arp rlir
oor mat :rget
dt.sh prui, firewall
rrwl1np
cowl ade outer Fanel
towl side: in:rr 1m+l
wisdshield opening
windacrccn gleaa
axtrume:t fanel
Figure 6A1,C
country s AR,C
welcome cold thick version
glove box
ventilation hole
other country board
shop window
rear birthday outer panel
upper welcome music
rear livestock smart glass
Gong Yi Zhen Sang
project education version
driver
5.car door anti-roll
5.32 door and window frame
car door glass
5.! Glass guide coffin
Full film
2.2? File bag
5.39 outside and "tree
GB/T 4780-200C
Table 3 continued)
Air 1 Sheng driving people's school, with a component that can help make display and camera components
Double walking children to store small objects
Qi guest cells with air inlet and outlet components
Guest can break the stem parts
Create the country to take the spirit of light, ventilation by
Use dry military window glass again window
position 1 him Because the rear part of the car body needs to measure the external analysis of the corner, the engineer should not press the left and right companions, and the rear gear of the car is full of differences in the cabin. The cabin toilet is decorated with heat and softening parts, which can create a door for the driver to get on and off the car for loading and unloading!
Qi and abandoned, get off the car
East door inside and outside the strong room to prevent the side can be single-handed
Window frame on the door
Moved glass installed on the door
Supply glass evenly moving belt-shaped machine channel and suitable for sealing the enterprise
Position dry door vibration and the original, archive the foundation of the month
The door is healthy and comfortable
The storage compartment is used for the bag for storing documents
Open the door handle from the car
Open the door from the outside of the car
Gluve box; glove control-
pertmer
wirveat
sidepanel
irte windnw
I side window [ramr.
qaaosindow
quart=: panel
rool rail :toof side rail
heks l
rear wiadow μlass
aafpRmel
Figure 1 A,B,C
Figure 6A.B.Heart
Figure aA.BC
Figure 6AH, heart
Because 6A,B,C
-,f tb-+rnl hw
headliner
driver doon
passenger tlocr
hurkluur
irirasion bean.
wisdow frms
don xlasa
g.aas rn channel
ow.er hieid
doo inaer trim
parke1s
inner duor aaadle
wurer doo: Lendl-
Figure 1A, BC
Figure 7A, B, C
5.42 Insurance busy
Bumper punch
Bumper bracket
Educational device old network
English board
Maidong Kaijue
Emotion filter board
Add vent 7 benefits
: Luggage benefits
Travel cabin door
5.52: Travel cabin partition
6.53: Safety items
Safety window
Safety door
.5. 53
Front intelligent reverse wing
Width register
GB/T 47802000
Table 3)
Central door lock button
For the shape of the door, some are customized and provided with full registration
In order to reduce the damage of the vehicle body in the event of a collision, a protective device installed at the rear end of the vehicle
position on the bumper to absorb the impact energy. The bumper is installed at the support part of the vehicle body connected to the tooth or frame. The radiator ventilation core is decorated as The components of the store
are busy with the teeth of the car, the outer panel of the wheel, the cover of the engine
on the wheel seedling or the inner longitudinal part, used to prevent the water and flying stones from the car when it is running, the parts of the car and the oiling port
the luggage retracting board
the door of the market
the upper part of the bank, separating the active passenger age of the bank
Liu Yingying adjusted
donr :naide lacl knab
clonr ventila: n glaan
hitnper gllart
hmper s:ay, bunper
rediator grill
w.ng ferccr
linkirl
lender
fn-t filler lin!
trunk Jid,deck L:d
comper:mcr.t door
trank she.f panel
roof exit for occupants to leave in an emergency ercape hateh
The desk often sinks down, and can be hit or broken to provide the window
under the urgent memory of the machine, for the door
and the opening and closing year's sweep
month's operation to realize the glorious history of the Guo parts
for the passengers to support the parts
located on the mother frame
before the country
located on both sides of the body
for example, the frame with a piece of lifting mountain support is installed under the measuring and stretching car
errgrucy win:l:
emergeney door
Ju.l pu.l
handlewwW.bzxz.Net
assist grip
frosl wall frare:
frual well kelerur.
front end :helf bcan
Irml el rnna sl
Nide wall rarr:
8.rl wall skelx1nn
N-tle wll pill:- r
Figure 7A, BC
Figure 4, A, RC
Figure 4 ABC
Example window pillar
招立止
：们文杜
偏里诺边染
将门与
5. 71 rear frame
rear by run beam
top cover frame
shrimp shrink swim
Chinese frame
5 attachment technical spectrum
GB/T 47802000
position waist recording upper force, for installation measurement retention support item cover can and
creative leather English adjustment words
side wircow pillu]
located in the body according to the direct text according to the dyeing of the Li Shi skist pillar
The main frame is used to support the door, the lower
the guide rail is set for the door opening and closing, the frame of the small car body
the deep frame of the rear frame, the frame at the bottom of the rear frame
the frame of the top of the car
the frame of the body of the car
In the passenger car, the main part is connected to the soft car teeth of the auxiliary car relative movement. In the passenger car, the vertical connection part maintains the body shape and adjusts the telescopic awning angle. The component position of the bottom of the middle frame is adjusted. The middle frame is fixed at the equal distribution point and the negative bisector F is removed. The main part is the "I\ shape structure" of the radioactive technology. See 1, Table 4 Appendix 6.1 waterway
e.2 scrubber
.4 cold installation
5 wind installation
doorpilar
wais: ra:l,belt rail
aide saalf member
sil kirt ril
elidc dosr reil
reat enel fremet
Icar end ske.etr.
rear enel ahe.f
rear end croas aill
roof iramc: \cot skele-
body understrurlure
flexible terjurlis
central frame
stebilizer bram
rlir:snl,
to consider the English words
clear the glass surface of the more water, this dust and other purple questions are all on the spray washing effect of the installation frost
step cabin hot case sleep and this hidden glass classic good and necessary device
for the cabin, Hualing Yanhong air conditioning installation pipe
cabin history change air I section
washer
heater
A/:air condi-oncr
ver.tilsio
signal use
rG minister board
make-up said
G.8 outside the rear specification
6.! Visual environment
under the temptation both
ri, 14
Folding spoiler
drum glass lifting
gas spring fee
safety emperor
room full gas pain
River restraint
welcome life-saving
clothing phase
5.28 spoiler
GB/T4780—2000
Installed on the top of the vehicle, and shielding the driver's limited cough light this level I shape out of the forget you passenger pursuit of the knife's child
And installed on the outside of the body, to provide the driver with a good rear view of the vehicle
Installed on the body, to provide the driver with a good rear view of the vehicle
Installed on the bottom of the cabin to provide a half of the spirit||t t||The front elastic device is used to limit the rearward movement of the passenger's head relative to the trunk. Its function is to reduce the possible damage to the passengers when a car accident occurs.
The detachable bed
device for the passengers to rest
The structure of locking the car door includes a lock body, a block (or a chain), an inner and outer stop mechanism
which is connected to the car door and the car body and can rotate the machine part on the same axis
The inner and outer stop mechanism
is connected to the car door and the car body and can stop the narrow part
of the car door
which can be raised and lowered by the machine part
and can use its own energy to assist the vehicle
when the car needs to be restrained or collided, it can prevent and reduce the damage to the passengers. wisor
vanity miror
nuled ttir virw nirrnt
I inte: rea: wiew mirrot
underviewrmar
head rest;
hcad restrsin
folding scat
slerarr
door liateh
duur linge
window Jiteh
winduw rcsulutur
gaeEprinz
Rea: heli,
Sate:y belt
When the car is in a collision, it can automatically open to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. rtb
Figure 5A.BC
Because 74,BC
Figure 7ABC71 rear frame
rear by run beam
top cover frame
shrimp shrink swim
Chinese frame
5 attachment technical spectrum
GB/T 47802000
position waist recording upper force, for installation measurement retention support item cover can and
creative leather English adjustment words
side wircow pillu]
located in the body according to the direct text according to the dyeing of the Li Shi skist pillar
The main frame is used to support the door, the lower
the guide rail is set for the door opening and closing, the frame of the small car body
the deep frame of the rear frame, the frame at the bottom of the rear frame
the frame of the top of the car
the frame of the body of the car
In the passenger car, the main part is connected to the soft car teeth of the auxiliary car relative movement. In the passenger car, the vertical connection part maintains the body shape and adjusts the telescopic awning angle. The component position of the bottom of the middle frame is adjusted. The middle frame is fixed at the equal distribution point and the negative bisector F is removed. The main part is the "I\ shape structure" of the radioactive technology. See 1, Table 4 Appendix 6.1 waterway
e.2 scrubber
.4 cold installation
5 wind installation
doorpilar
wais: ra:l,belt rail
aide saalf member
sil kirt ril
elidc dosr reil
reat enel fremet
Icar end ske.etr.
rear enel ahe.f
rear end croas aill
roof iramc: \cot skele-
body understrurlure
flexible terjurlis
central frame
stebilizer bram
rlir:snl,
to consider the English words
clear the glass surface of the more water, this dust and other purple questions are all on the spray washing effect of the installation frost
step cabin hot case sleep and this hidden glass classic good and necessary device
for the cabin, Hualing Yanhong air conditioning installation pipe
cabin history change air I section
washer
heater
A/:air condi-oncr
ver.tilsio
signal use
rG minister board
make-up said
G.8 outside the rear specification
6.! Visual environment
under the temptation both
ri, 14
Folding spoiler
drum glass lifting
gas spring fee
safety emperor
room full gas pain
River restraint
welcome life-saving
clothing phase
5.28 spoiler
GB/T4780—2000
Installed on the top of the vehicle, and shielding the driver's limited cough light this level I shape out of the forget you passenger pursuit of the knife's child
And installed on the outside of the body, to provide the driver with a good rear view of the vehicle
Installed on the body, to provide the driver with a good rear view of the vehicle
Installed on the bottom of the cabin to provide a half of the spirit||t t||The front elastic device is used to limit the rearward movement of the passenger's head relative to the trunk. Its function is to reduce the possible damage to the passengers when a car accident occurs.
The detachable bed
device for the passengers to rest
The structure of locking the car door includes a lock body, a block (or a chain), an inner and outer stop mechanism
which is connected to the car door and the car body and can rotate the machine part on the same axis
The inner and outer stop mechanism
is connected to the car door and the car body and can stop the narrow part
of the car door
which can be raised and lowered by the machine part
and can use its own energy to assist the vehicle
when the car needs to be restrained or collided, it can prevent and reduce the damage to the passengers. wisor
vanity miror
nuled ttir virw nirrnt
I inte: rea: wiew mirrot
underviewrmar
head rest;
hcad restrsin
folding scat
slerarr
door liateh
duur linge
window Jiteh
winduw rcsulutur
gaeEprinz
Rea: heli,
Sate:y belt
When the car is in a collision, it can automatically open to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. rtb
Figure 5A.BC
Because 74,BC
Figure 7ABC71 rear frame
rear by run beam
top cover frame
shrimp shrink swim
Chinese frame
5 attachment technical spectrum
GB/T 47802000
position waist recording upper force, for installation measurement retention support item cover can and
creative leather English adjustment words
side wircow pillu]
located in the body according to the direct text according to the dyeing of the Li Shi skist pillar
The main frame is used to support the door, the lower
the guide rail is set for the door opening and closing, the frame of the small car body
the deep frame of the rear frame, the frame at the bottom of the rear frame
the frame of the top of the car
the frame of the body of the car
In the passenger car, the main part is connected to the soft car teeth of the auxiliary car relative movement. In the passenger car, the vertical connection part maintains the body shape and adjusts the telescopic awning angle. The component position of the bottom of the middle frame is adjusted. The middle frame is fixed at the equal distribution point and the negative bisector F is removed. The main part is the "I\ shape structure" of the radioactive technology. See 1, Table 4 Appendix 6.1 waterway
e.2 scrubber
.4 cold installation
5 wind installation
doorpilar
wais: ra:l,belt rail
aide saalf member
sil kirt ril
elidc dosr reil
reat enel fremet
Icar end ske.etr.
rear enel ahe.f
rear end croas aill
roof iramc: \cot skele-
body understrurlure
flexible terjurlis
central frame
stebilizer bram
rlir:snl,
to consider the English words
clear the glass surface of the more water, this dust and other purple questions are all on the spray washing effect of the installation frost
step cabin hot case sleep and this hidden glass classic good and necessary device
for the cabin, Hualing Yanhong air conditioning installation pipe
cabin history change air I section
washer
heater
A/:air condi-oncr
ver.tilsio
signal use
rG minister board
make-up said
G.8 outside the rear specification
6.! Visual environment
under the temptation both
ri, 14
Folding spoiler
drum glass lifting
gas spring fee
safety emperor
room full gas pain
River restraint
welcome life-saving
clothing phase
5.28 spoiler
GB/T4780—2000
Installed on the top of the vehicle, and shielding the driver's limited cough light this level I shape out of the forget you passenger pursuit of the knife's child
And installed on the outside of the body, to provide the driver with a good rear view of the vehicle
Installed on the body, to provide the driver with a good rear view of the vehicle
Installed on the bottom of the cabin to provide a half of the spirit||t t||The front elastic device is used to limit the rearward movement of the passenger's head relative to the trunk. Its function is to reduce the possible damage to the passengers when a car accident occurs.
The detachable bed
device for the passengers to rest
The structure of locking the car door includes a lock body, a block (or a chain), an inner and outer stop mechanism
which is connected to the car door and the car body and can rotate the machine part on the same axis
The inner and outer stop mechanism
is connected to the car door and the car body and can stop the narrow part
of the car door
which can be raised and lowered by the machine part
and can use its own energy to assist the vehicle
when the car needs to be restrained or collided, it can prevent and reduce the damage to the passengers. wisor
vanity miror
nuled ttir virw nirrnt
I inte: rea: wiew mirrot
underviewrmar
head rest;
hcad restrsin
folding scat
slerarr
door liateh
duur linge
window Jiteh
winduw rcsulutur
gaeEprinz
Rea: heli,
Sate:y belt
When the car is in a collision, it can automatically open to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. rtb
Figure 5A.BC
Because 74,BC
Figure 7ABCG Chen board
makeup talk
G.8 outside rear specification
6.! Visual environment
lower temptation
ri, 14
Folding spoiler
drum glass lifting
gas spring fee
safety emperor
room full gas pain
River restraint
welcome life-saving
clothing phase
5.28 spoiler
GB/T4780—2000
Installed on the top of the vehicle, and shielding the driver's limited cough light this level I shape out of the forget you passenger pursuit of the knife's child
And installed on the outside of the body, to provide the driver with a good rear view of the vehicle
Installed on the body, to provide the driver with a good rear view of the vehicle
Installed on the bottom of the cabin to provide a half of the spirit||t t||The front elastic device is used to limit the rearward movement of the passenger's head relative to the trunk. Its function is to reduce the possible damage to the passengers when a car accident occurs.
The detachable bed
device for the passengers to rest
The structure of locking the car door includes a lock body, a block (or a chain), an inner and outer stop mechanism
which is connected to the car door and the car body and can rotate the machine part on the same axis
The inner and outer stop mechanism
is connected to the car door and the car body and can stop the narrow part
of the car door
which can be raised and lowered by the machine part
and can use its own energy to assist the vehicle
when the car needs to be restrained or collided, it can prevent and reduce the damage to the passengers. wisor
vanity miror
nuled ttir virw nirrnt
I inte: rea: wiew mirrot
underviewrmar
head rest;
hcad restrsin
folding scat
slerarr
door liateh
duur linge
window Jiteh
winduw rcsulutur
gaeEprinz
Rea: heli,
Sate:y belt
When the car is in a collision, it can automatically open to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. rtb
Figure 5A.BC
Because 74,BC
Figure 7ABCG Chen board
makeup talk
G.8 outside rear specification
6.! Visual environment
lower temptation
ri, 14
Folding spoiler
drum glass lifting
gas spring fee
safety emperor
room full gas pain
River restraint
welcome life-saving
clothing phase
5.28 spoiler
GB/T4780—2000
Installed on the top of the vehicle, and shielding the driver's limited cough light this level I shape out of the forget you passenger pursuit of the knife's child
And installed on the outside of the body, to provide the driver with a good rear view of the vehicle
Installed on the body, to provide the driver with a good rear view of the vehicle
Installed on the bottom of the cabin to provide a half of the spirit||t t||The front elastic device is used to limit the rearward movement of the passenger's head relative to the trunk. Its function is to reduce the possible damage to the passengers when a car accident occurs.
The detachable bed
device for the passengers to rest
The structure of locking the car door includes a lock body, a block (or a chain), an inner and outer stop mechanism
which is connected to the car door and the car body and can rotate the machine part on the same axis
The inner and outer stop mechanism
is connected to the car door and the car body and can stop the narrow part
of the car door
which can be raised and lowered by the machine part
and can use its own energy to assist the vehicle
when the car needs to be restrained or collided, it can prevent and reduce the damage to the passengers. wisor
vanity miror
nuled ttir virw nirrnt
I inte: rea: wiew mirrot
underviewrmar
head rest;
hcad restrsin
folding scat
slerarr
door liateh
duur linge
window Jiteh
winduw rcsulutur
gaeEprinz
Rea: heli,
Sate:y belt
When the car is in a collision, it can automatically open to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. The passenger compartment is set up to protect the child. rtb
Figure 5A.BC
Because 74,BC
Figure 7ABC
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.