GB/T 2668-2002 Specifications for men's and women's single-piece suits

This standard specifies the finished product specifications of men's and women's single garments. This standard applies to men's and women's single garments produced in batches with cotton, linen, silk, chemical fiber and their blended fabrics as raw materials. GB/T 2668-2002 Specifications of men's and women's single garments GB/T2668-2002 Standard download decompression password: www.bzxz.net

ICS 61.020
National Standard of the People's Republic of China
GB/T2668—2002
Replaces GB/T2668—1993
Specifications for men's and women's single-piece suits
Sizes for zhongshan coats:
jackets and trousers
Promulgated on September 5, 2002
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implementation on February 1, 2003
GB/T 2668--2002
This standard replaces GB/T2668-1993 "Specifications for men's and women's single-piece suits". Compared with GB/T2668-1993, the main changes of this standard are as follows: In order to better guide enterprises to set the specifications of clothing products in a standardized manner and comply with the provisions of GB/T1335 "Clothing Sizes", this standard cancels the content of the 5.3 series in the revision. This standard is proposed by the China Textile Industry Association. This standard is under the jurisdiction of the National Technical Committee for Clothing Standardization. This standard was drafted by the Shanghai Garment Research Institute. The main drafters of this standard are: Xu Yunbao, Xu Jian, Qin Wei. The previous versions of the standards replaced by this standard are: ---GB/T2668-1981.GB/T2668-1993; GB/T 2669-1981.
1 Scope
Specifications of men's and women's single suits
This standard specifies the finished specifications of men's and women's single suits. This standard applies to men's and women's single suits produced in batches with cotton, linen, silk, chemical fiber and their blended fabrics as raw materials. 2 Normative references
GB/T 2668—2002
The clauses in the following documents become clauses of this standard through reference in this standard. For all dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties reaching an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated references, the latest versions are applicable to this standard. GB/T1335.1--1997 Clothing Sizes for Men GB/T1335.2--1997 Clothing Sizes for Women 3 Specification Setting
3.1 The finished product specification series is set according to the numerical values ​​of the control parts of each series of clothing size in GB/T1335.1-1997 and GB/T1335.2--1997, plus different relaxation amounts.
3.2 The specifications of each part of the men's Zhongshan suit, men's and women's jackets are set in one group, and can be selected according to the group within the same size. 4 Specifications of men's Zhongshan suits
4.1 Size series
5·4 series tops are centered on 170/88Y, 170/88A, 170/92B, 170/96C. Chest circumference is divided into 4cm steps; collar circumference is divided into 1cm steps; total shoulder width is divided into 1.2cm steps; back length is divided into 2cm steps; sleeve length is divided into 1.5cm steps. 5·2 series bottoms are centered on 170/70Y, 170/74A, 170/84B, 170/92C. Waist circumference is divided into 2cm steps; hip circumference is divided into 1.6cm steps for Y-type and A-type, and 1.4cm steps for B-type and C-type; trouser length is divided into 3cm steps. 5·4 series bottoms can be used in combination according to the adjustment coefficient of 5·2 series. 4.2 Model Series Specifications
4.2.15·4Y Model Series Men’s Zhongshan Suit Top Specifications See Table 1.103
GB/T26682002
Part Name
Total Shoulder Width
Back Length
Back Length
Back Length
Back Length
Back Length
Back Length
Back Length
25·2Y For the specifications of the men’s Zhongshan suit bottoms in the size series, please see Table 2. 4.2.2
Part name
94.095.697.2
Unit: cm
Unit: cm
98.8100.4102.0103.6105.2106.88108.4110.0|111.6
4.2.35·For the specifications of the men’s Zhongshan suit tops in the size 4A series, please see Table 3. Table 3
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
Back length
For the specifications of 5.2A series men's Zhongshan suit bottoms, please see Table 4. Table 4
Part name
Part name
GB/T2668--2002
Unit: cm
Unit: cm
100.4102.0|103.6103.6105.2106.8106.8108.4110.0110.0111.6113.293.5
GB/T2668
55·For the specifications of the 413 series men’s Zhongshan suit tops, please see Table 5.4.2.5
Part name
Total width
Longevity
Back length
Back length
Back length
Back length
Back length
Back length
5.2B series men’s Zhongshan suit bottoms, please see Table 6. Table 6
Part name
Part name
Unit: cm
Unit: cm
5: For the specifications of the low-size series men’s Zhongshan suit tops, please see Table 7. Model
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
Back length
For specifications of 5.2C series men's Zhongshan suit bottoms, see Table 8.4.2.8
Part name
Part name
63.5.63.5
113.2114.6
GB/T2668--2002
Unit: centimeters
Unit: centimeters
GB/T 2668 -2002
5 Specifications of men's jackets
5.1 Size series
5·4 series T-shirts are centered on sizes 170/88Y, 170/88A, 170/92B, and 170/96C. The chest circumference is divided into 1cm steps. The collar is divided into 1cm steps. The total shoulder width is divided into 1.2cm steps. The back length is divided into 2cm steps. The sleeve length is divided into 1.5cm steps. 5.2 Size series specifications
5.2.15·4Y size series men's jacket specifications are shown in Table 9. Table 9
Part name
Total shoulder width
Back length
Back length
Rear length
Back length
Back length
Product specifications
5.4A series men's jacket specifications are shown in Table 10. 5.2.2
Part Name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
Back length
Back length
Back length
Back length
Unit: meter
Unit: centimeter
5.41 Model series male gourd shirt specifications are shown in Table 11. Model
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
Back length
Back length
5.2.45·4C Model series male jacket specifications are shown in Table 12. Modelwww.bzxz.net
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
Back length
GB/T 2668—2002
Unit: cm
Unit: cm
GB/T2668---2002
Specifications of women's jackets
6.1 Model series
5·4 Series F is centered on sizes 160/84Y, 160/84A, 160/88B, and 160/88C. The chest circumference is divided into 4cm steps, the collar circumference is divided into 0.8cm steps, the total shoulder width is divided into 1.0cm steps, the back length is divided into 2cm steps, and the sleeve length is divided into 1.5cm steps. Size series specifications
6.2.15·For the specifications of 4Y size series female jackets, see Table 13. Model
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
5·For the specifications of 4A size series female jackets, see Table 14. Model
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
Back length
The unit is cm
The unit is cm
6.2.35·For the specifications of 4B series female jackets, please see Table 15. Model
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
The unit is cm
The unit is cm
6.2.35·For the specifications of 4B series female jackets, please see Table 15. Model
Part name
Total shoulder width
Back length
Back length
Back length
Back length
Back length
GB/T2668--2002
Unit is cm
Unit is cm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.