HG/T 2123-1991 Agitator types and main parameters

HG/T 2123-1991 Agitator Type and Main Parameters HG/T2123-1991 Standard Download Decompression Password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Agitator Types and Main Parameters
Subject Content and Scope of Application
HG/T 2123-91
20010326
This standard specifies the types, series and main parameters of agitators. This standard applies to agitators installed in vertical mechanical stirring vessels with a nominal diameter of 400~5800mm, which are used for stirring liquid media with a density of less than 2000kg/m3 for various physical and chemical processes. 2 Symbols
DJ: agitator diameter;
DN: inner diameter of the stirring vessel;
b: agitator width:
bh: Height of agitator from the bottom
: Blade length:
d: Impeller diameter:
h: Blade height;
S: Pitch of ribbon agitator or screw agitator; h: Height of guide tube;
Da: Inner diameter of guide tube;
Z: Number of blades;
0: Blade inclination angle;
2: Blade bend angle;
β: Blade upward angle:
Zt Number of ribbons.
Agitator type, series and main parameters
Agitator type, series and main parameters are shown in Table 1.
W. Sequence selector
HG/T2123-91
Fuel mixer
Jade series DJ
6303550
3602000
4502500
Structural parameters
DJ-(0.25~0. 75)DN
b= (0. 1 ~0. 25)DJ
h=[0. 2~1)DJ
DJ (0. 25 -0. 75)DN
b= (0. 1 ~0. 3)DJ
h- (0. 21)D)
9.-45°. 60°
DJ -(0. 2--0. $)DN
b= (0. 125~ 0. 25)DJ
h=(0. 5~ 1)DJ
DJ -(0. 2~0. 5)DN
b= (0. 125~0. 25)DJ
h=(0. 5~1)DJ
0-24°45°60*
velvet speed
#=4~10
Mm. Sequence "Agitator
HG/T2123-91
Agitator diameter series DJ
Number of joints
DJ(0.2~0.5)DN
b= (0.1~:0.3)DJ
h=(0.5~1)DJ
α=30°、45°
60°.80°
DJ=(0.2~0.5)DN
DJ-(0.2~0,5)DN
0-45°. 60°
Linear speed
V-4-10
.cOmPower
3Vortex
HG/T 2123—91
Continued Table 1
Agitator diameter series
Knot parameters
D7 = (0. 2~0. 5)DN
8503100
11403350
13403750
15304250
DJ-(0. [S-0. 5)DN
+=(1 ~ 1. 5)DJ
atg*l0. 318 DY
0,- 17* 40
DJ-(0.80.98)DN
h, = (0. 48 ~ I)DJ
6 = [0. 06~0. 1)0]
h-(0.05~0.08S)DJ
Linear speed!
#*4~10
Viscosity products
(Above 500 r/mi
Applicable
HG/T2123-91
Continued table!
Agitator diameter series DJ
Structural parameters
2501000
DJ-(0.5-0.7)DN
-(0. 08 ~0. 17)D)
4-30°.50°
#-15\～20*
A- (0. 1 - 0. 3)DJ
DJ-(0. 40. 6)DN
D,=(1. 05~1. 15) DJ | 4702320
6602710Www.bzxZ.net
11403350
DJ-(0. 9~0.98)DN
S=(0.5~1.5)D)
h,-(1~3.0)DJ
is = (0. 01 ~ 0. 05)DJ
Line speed.
Wm. Free download of customer standard industry materials two
Additional notes:
IIG/ T 2123—91
Continued table!
Agitator
Diameter Series DJ
Structure Most
2501000
4001600
4501800
DJ=(0. t5-0. )DN
,=(0.04~0.1)D)
±,=0. 8D
hn (0. 5--1, S)D)
DJ=(0. 5-0. 7DN
,-(1 --1. 5)DJ
A= 0. 2DJ
Linear speed!
y=5~20
, This standard was proposed by China National Chemical Equipment Corporation. This standard is under the jurisdiction of the Chemical Industry Ministry's Chemical Machinery Equipment Standardization Technical Procurement Unit (Chemical Industry Ministry's Chemical Machinery Research Institute). This standard was drafted by Zhejiang University, with participation from Shanghai Chemical Engineering Design Institute and Guangdong Petrochemical Equipment Company Kaiping Machinery Factory. The main drafters of this standard are Zhang Feng, Zheng Kai, and Shen Zufeng. W
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.